similar to: RH9, Samba 2.2.8a and printing with CUPS

Hi again Thank you all for helping me out, really appreciate it. Works like a charm now, I added [global] printing = cups printcap name = lpstat load printers = yes and in [printers]-section: [printers] comment = All Printers path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes

Hello Family, In attempting to print from Win2000 to RedHat-6.2 Linux (Samba-2.2.2) using CUPS I received the following errors from /var/log/cups/error_log I [28/Dec/2001:19:20:40 +0800] Listening to 0:631 I [28/Dec/2001:19:20:40 +0800] Configured for up to 100 clients. I [28/Dec/2001:19:20:40 +0800] LoadPPDs: Read "/etc/cups/ppds.dat",12 PPDs... I [28/Dec/2001:19:20:40 +0800]

Hi all, I'm new to this list, as to SAMBA, and I'm struggling with getting a printer to work as a shared printer in a Windows network with a redhat 9 server. The printer is a HP 4550 Color LaserJet, installed with CUPS to the server, via JetDirect (port 9100). It prints testpages fine from the Linux-server. It was installed with the install-printer-utility in RedHat9. I have then shared

Hi, I am using Version 3.0.2a of samba on Linux 2.4.18 (suse with self-compiled samba from tarball) smb.conf: [IEPRINT] path = /home/htmprint/tmp printable = Yes print command = /home/htmprint/Programme/virtual_printer.sh %s After some weeks with some thousand printjobs generated by a program running as W2k-service the printer was no more available. I checked printing

Hello! I'm having a problem with Samba 3.0.3 on a HP-UX 11.00 server. In Samba, I'm having a printer which allows me to create PDF files. For this, I added the following lines to smb.conf: [global] load printers = No printcap name = /etc/opt/samba/printcap [printers] comment = Defaults for all printers path = /var/opt/samba/spool read only = Yes

Hi. I run SuSE 8.1 and samba here. On the linux machine I have a HP1100A on the parallel port, and a HP-DJ895Cxi on a USB port. I can print ok from this linux machine to both printers. From my laptop, that runs WIN98, I can print to the HP1100A printer. I cannot print to the DJ895Cxi, even if its set up as a network printer. I could do this with SuSE dists up to 8.0. From 8.1 printers are

I've got Samba 2.2.3 running as a PDC for some Win9x and WinNT clients. Everything seems to be fine except that occasionally (but rather often, at least every second day) printing from one of the NT-clients is impossible. In the log file it says (word wrap here in the editor): [2002/02/26 18:04:21, 0] printing/printing.c:print_job_start(952) print_job_start: insufficient permissions to open

Hi there, I'm having some issues with a samba PDC. Using debian etch, kernel version 2.6.18-6-686. I have samba-3.0.24, smbldap-tools-0.9.2, openldap-2.3.30, bind-9.3.4 and isc dhcp-server-3.0.4 with ddns on the same server, I can join and remove Windows XP machines from the domain but I have this Windows NT Workstation that can't join the domain at all. The error it gives is something

Howdi, I can't add a w2k workstation to samba3 domain with my username. If I add my username to "admin users" list, then I can add the box to domain (but overritten by euid). My goal is, that joining domain can be done without using "admin users" option. Groupmapping is done and works. When machine is in domain and log in, I get full admin rights on that box. Removing the

Guten Tag Samba-List, after updating my Linux-Server from Debian Etch to Lenny, some of my workstations (W2kSP4) couln't log into the domain. I removed the machines from the domain, changed the name, created a new machine-account, but I still can't add the machine to the domain. My /etc/smb.conf (see below the logfile) is unchanged since Debian Etch. Perhaps someone

I'm trying to figure out why I'm getting permission denied when trying to print from one user account only. all others work fine. the print server is configured as a domain controller backed by ldap. aarcane at density:/var/log$ sudo testparm -s Load smb config files from /etc/samba/smb.conf rlimit_max: rlimit_max (1024) below minimum Windows limit (16384) Processing section

hi just a question to understand we have a NT PDC and i successfully transfered it's data to samba 3.0 because we're cautious i let the NT PDC "online" (domain=evan) and introduced samba with the same date in a new domain (domain=testevan) for testing purposes to get rid of conflicts i had to change the SID of the samba server, because my knowledge tells me: "a sid

Hi list, I am trying to track down a printer-related problem. The most important symptom is a smbd process using almost all memory on my machine (up to 800 MB, at the specific case of which I've posted the logs.) At some point the VM will kill the smbd process, freeing the memory. Apart from this, samba keeps on running fine. Investigation of a level 3 debug log of this process has shown

Hi everybody out there! I'm using Samba 2.2.5, coming with SuSE 8.1 and should connect from an XP-Pro PC, really logged into an W2K PDC with Domain Account, to the Samba server mentioned above. Problem: Logged from XP-Pro client into W2K PDC account, I can not connect and always get a "System error 1240" (net use <drive:> \\SMBSERVER\share) which I also can not avoid doing

Hello, I print from a Win2000 Station to a Debian SID with Samba and cups ( [samba 2.999+3.0.alph] [cupsys 1.1.18-1] ), I can print but on the Win2000 I have the message (unable to connect on the printer ....) and this is a part of my error_log file: adPPDs: Read "/etc/cups/ppds.dat", 143 PPDs... I [07/Jan/2003:19:06:31 +0100] LoadPPDs: No new or changed PPDs... E

I was having a problem with my Samba PDC with LDAP backend. Some of my workstations (W2kSP4) couln't log into the domain. I removed the machines from the domain, changed the name, created a new machine-account, but I still can't add the machine to the domain. smbclient -L localhost Enter root's password: Anonymous login successful Domain=[DCHOMO] OS=[Unix]

I am trying to attempt to set up a samba ldap PDC server. When I try and connect a computer to the network I get error 'Username could not be found' I have included smbldap.conf ##smbldap.conf slapd.conf ##slapd.conf the smb.conf ##smb.conf the results of slapcat ##slapcat the eriror log for log.roor ##log.root The error I marked as interesting ##interesting , shows that it

Hello Is there any hope one day a Samba PDC will work with NetAPP filer ??? I mean will it be possible to register a filer as a machine in a Samba PDC ? I fails since years and I never had any clear explainations about it. Couls someone ( Mr Bartlett ? ) tell me why it had never be possible ? Thanks a lot.

Hi. To begin with, I have a freshly built RedHat Linux 8.0 box running samba 2.2.8a. The kernel version is 2.4.18-14. I downloaded and compiled samba from source. I am using LPRng-3.8.9-6 as my printing system. The attached printer is a Lexmark Z22 printer and it is attached to the parralel port. Problem: For the life of me, I can't get NT type clients, NT4, 2K and XP to print to samba.

Cups 1.2.7 Debian Etch with Samba 3.0.24 Clients: WinXP SP3 (with Firewall completely off for testing) When I define a printer specifically in smb.conf, they show up as shared printers in WinXP. But when I follow the normal way (see below) to load all from cups they don't. I followed mainly the latest SAMBA-HOWTO (chapter 21-22) The only error I see in log.smbd when accessing the