similar to: e2fsck: bad magic number in super-block

Hello all. I have a server with a linux software raid1 setup between two drives of the same model....one hard drive as primary ide master and second hard drive as secondary master. Now primary master hard drive is displaying a lot of SMART errors so I would like to remove it and replace with another drive....different brand but same size. Partitions are /dev/md0 till /dev/md5. I think I know what

Hello all, Wine is getting solid enough that it is appropriate for some real work, however it still is failing write with write errors from MS Word. Updates, reads, edits, fonts, etc all seem to be fine. However any write causes a disk full or permissions error. I am running as root root in this case and other programs under wine write w/o error. If it is any clue the file name shows up as

Hello, I''m doing one emergencial migrate for one very old machine, because we will have one IMPLOSION (!!!) very close from here, and I''m thinking that this old IDE disk will not survive... :-/ [root@registro-2 /root]# df -h Filesystem Size Used Avail Use% Mounted on /dev/ida/c0d0p2 3.8G 2.3G 1.4G 62% / /dev/ida/c0d0p8 26G 20G 4.4G 82% /data

Dear All On my CentOS server , the '/boot/grub/menu.lst' has the right configuration but when I reboot my CentOS server I cannot enter to grub edit menu to edit my boot kernel by pressing the 'e' key . Can you please confirm if I can activate it through issuing the followings : #grub-install /dev/hdax Is it a safe procedure to try with? Please confirm. Thank you -------------- next

I installed a 4.1 x86_64 with kernel 2.6.9-11.ELsmp (rpm) initially. My box is tyan 5350 and a SATA harddisk The install was successful and the harddisk was detected as /dev/sdaX But strangely, when I first reboot my machine. The harddisk change to /dev/hdaX What is the problem ? Below are some of dmesg output hda: WDC WD1200JD-00HBB0, ATA DISK drive Probing IDE interface ide1... Probing IDE

Hello, I found a bug in Latest wine releases. I found it in the wine-20040914,wine-20040813 rpms for the RedHat Distributions.I had tested it in RedHat-9.0,7.3 systems. The bug is that, when we try to open(file->open) from any windows applications, the application hangs. For eg., even in Notepad, when I click File-> Open, wine shows the following error. --------- wine: Unhandled

After your done editing the fstab, rc.local, touch, chmod and reboot you should uses the following commands at the shell prompt quotacheck -avug /dev/hdaX # X would be the mounted filesystem quotaon -avug /dev/hdaX Quotas should be up and running after that. As for the quotacheck -c, Hog wash. I never had to use it with 7.2

I posted this to the Fedora-list, but thought I might get some additional information here as well. I have a HD that refuses to mount with a 'bad magic number in super-block'. I'm running FedoraCore 6 x86_64. [root at moe ~]# fdisk -l /dev/hdc Disk /dev/hdc: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes

Hi all, I've been working with the ext3-fs for several months (since 0.0.2c), and it works pretty fine for me, but I haven't found out, how I works to migrate my root-partition from ext2 to ext3. I tried it with the commands at the lilo-prompt, but it didn't work. I only received a kernel panic. Any ideas, how I can migrate to ext3 on my root-partition? tnx, Joachim -- Joachim

Hi, I have installed Red Hat Linux 7.3 with ext2 file system and I have multiple partition. I converted them to ext3 using following command. tune2fs -j -i 0 /dev/hdaX And I modified /etc/fstab as below. LABEL=/ / ext3 defaults 1 1 LABEL=/boot /boot ext3 defaults 1 2 none /dev/pts

Hi, a customer has a Centos installation on SCSI disk (aic7xxx), there are some programs that he no longer have the installation media (some accounting stuff). Due to the SCSI disk going bad we must tranfer the installation to some other disks. SCSI disks are very difficult to find here and must be ordered (and wait about 45 days to arrive at the dealer). Can I clone the SCSI disk to a IDE Disk

Hello all, I have a problem with Xen and FibreChannel. The Dom0 can''t export a Disk on a FibreChannel SAN-Box to the DomU''s. In the DomU configuration I try: disk = [ ''phy:/dev/sdb1,/dev/sda1,w'' ] or disk = [ ''file:/mnt/sambashare.img,sda1,w'' ] sambashare.img is a 512MB great Diskimage on a Partition on the FC-SAN-Box, the Dom0 mount this

Hi! I'm new to the list. I have a problem with mounting my home directory since my PC crashed. I hope that I can get some help on this list as I don't know much of ext3 myself. The mount command for my /home gives me the following output: # mount /dev/sda6 /mnt/tmp/ mount: wrong fs type, bad option, bad superblock on /dev/sda6, missing codepage or other error In some cases useful info

Hello! I'm using i868 (Pentium III) machine running Windows 2000 and running Linux, installed on dedicated partition, in parallel via VMWare. Linux config is RedHat 7.0 (kernel ) As I'm pretty new to Linux, I'd like to know exact procedure how to install ext3 filesystem support (also which packages do I need). My kernel config is as follows: kernel-headers-2.2.14-5.0

Hi folks PV-GRUB built from Xen 3.3.0 is not able to read from devices without a partition table: | grubdom> root (hd0) | Filesystem type unknown, using whole disk Part of the config: | disk = [ "phy:vg0_sledgehammer/servext_root,xvda,w" ] Device: | # file -s /dev/vg0_sledgehammer/servext_root | /dev/vg0_sledgehammer/servext_root: symbolic link to

Hello , I use kernel 2.4.7 patched with corresponding ext3 patch. The problem I have is that when I startup I get a panic in a kernel. I started to debug util-linux and found that mount does a segmentation fault when trying to open /etc/mtab file. The segmentation fault ocurrs on open() call inside mtab_is_writable() procedure: printf("mtab_writable: pass 1\n"); if (ret ==

Any pointers as to how to proceed with this would be most welcome! wine --version wine-1.3.19 lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 10.04.2 LTS Release: 10.04 Codename: lucid I used crossover to create a Win XP bottle and installed IE7 and then MLDownloader. There is a 15 day trial version available here:

Hi Ted and all, I have a couple of questions near the end of this message, but first I have to describe my problem in some detail. The power failure on Thursday did something evil to my ext3 file system (box running RH9+patches, ext3, /dev/md0, raid5 driver, 400GB f/s using 3x200GB IDE drives and one hot-spare). The f/s got corrupt badly and the symptoms are very similar to what Eddy described

Hello I have installed centos 4.2 in dell poweredge 850. but I found that when I launch up2date to do a update action, it always get time out problem. just like error while retrieving package gtk 2-2.14.13-18 the message is time out any one can give some help Thanks and Regards Terry ************************************ E-mail Disclaimer ************************************ This e-mail

Hi, there are a way of encoding to a icecast in ogg, and have a relay, streaming in mp3? tanks Andr+AOk- Marcelo Internet R+AOE-dio Chat Brasil http://www.ircbrasil.com.br Fone: 61 341 3305 - cel: 61 9628 6588 msn: andre+AEA-ircbrasil.com.br -------------- next part -------------- An HTML attachment was scrubbed... URL: