similar to: Samba, CUPs & Win2000 printing

Anyone successfully using a HP 8000 DN or HP 5 Lsi (with JetDirect module and assigned IP) with samba? Subject says it all. If you're successfully doing this, what configs made it work? FAQs tell how to set up with a print server, but what if the printer itself is the server? Trust me, the HP doesn't know jack about port 139. Using samba 2.0.4 on Solaris 7 and NT 4.0 SP5 with

We have a HP Design Jet 650C Plotter which is hooked to the net via a jetdirect nic. Now I dont have a clue on how to use this plotter over the net. It doesent show up in the network neighborhood and I cant find anything about jetdirect plotters in the Linux documentation or the inet. The server is running Suse Linux 6.2 and Samba 2.05a. TIA Florian v. Behr

I am having problems with the HP printers that are being handled by a Solaris 2.5.1 machine. The boring details are towards the end. The SAMBA print command I currently use is: print command = echo %u - %s to %p at %T >> /tmp/smb-print.log ; \ lpr -P %p %s ; \ rm %s ; These are EXACTLY the way they are in the smb.conf file. The server will print 99.9% of

Hi All, When our server receives simultaneous print jobs from 2 or more clients, the print service stalls and I have to manually restart it (lpsched). I am running Samba 2.0.4b under Solaris 2.5.1 on a SPARC 20 and I'm using system V printing. The printers are connected to the ethernet using HP Jetdirect cards and administered by jetadmin on the Sun box. Any ideas on how I could troubleshoot

I am running RedHat V9.0 with SAMBA v2.2.7a-8.9.0 on both servers that are involved. We have a fairly small network ( 500+ Nodes ) ( Mixed environment Windows 2K - XP ). SMB/NMB server. ( RedHat V9.0 / SAMBA v2.2.7a-8.9.0 ) acting as stand-alone server: ( wins support = yes ) ( IP = X.X.X.2 ) NMB server ( RedHat V9.0 / SAMBA v2.2.7a-8.9.0 ) configured as a wins proxy. ( wins support = no,

Hello, I have a bunch of Windows XP Pro machines, Samba 2.2.4, and several plotters on Jetdirect cards, and several printers on Netport 10/100 Muli-port network print servers. I have successfully configured Samba 2.2.4 to allow Windows XP to join the domain controlled by Samba and automaticaly create its own computer account on Samba. I would now like to setup Samba to share all the printers

Howdy Folks: This may be slightly (but not entirely) off-topic for this list, but I'm sure there are some real gurus out there who should know this (and I've seen a number of related questions) so here goes: We just got a new HP8100DN printer. The guy didn't want to let me do the samba printserver thing, nor did he put it on a windoze box - he put it directly on the network

I have a samba based domain controller with a CUPS printer working fine. When I try to connect to a samba printer from Win2000 I get the following in the samba log: 2003/11/04 20:38:02, 0] printing/print_cups.c:cups_queue_get(889) Unable to get jobs for ipp://localhost/printers/goucho - client-error-not-found [2003/11/04 20:38:02, 0] smbd/service.c:set_admin_user(321) root logged in

I am currently researching the possibility of slowly moving an existing Novell network [with all Windows clients except mine :)] to something Linux based. I have about 900 clients that would be slowly migrated if this whole thing is feasible. The version of NetWare we are using now is no longer "officially supported" from Novell, so it is becoming more and more difficult to successfully

Hi, WOW, this was posted over a year ago! A response now. The problem still exists. As reconfirmed in a post i read not to long ago (within the last 2 weeks?). HP jetdirect cards can only do one thing at a time. (HP has been writing Jetdirect firmware for 5 years, PLEASE HP you _MUST_ have the ability to fix it?! Or don't you??) This can be confirmed if you have an NT only shop. In the

Hi all, I'm new to this list, as to SAMBA, and I'm struggling with getting a printer to work as a shared printer in a Windows network with a redhat 9 server. The printer is a HP 4550 Color LaserJet, installed with CUPS to the server, via JetDirect (port 9100). It prints testpages fine from the Linux-server. It was installed with the install-printer-utility in RedHat9. I have then shared

Hi again, I realize this is generally not the place for this question but this is always where the answers are so here goes. We have a couple of win95 Pcs that regularly go nuts and arp foreach IP address on their subnet. The resulting broadcast storm is make even worse because of the inability of our net. admin. to 1) explain it 2) contain it 3) fix it (not too bright). I checked the registry

Hello, where is the FAQ on networking(Broadcast probes for hpjetadmin and other lowlevel hocus pockus) in wine, Half-Life and hpjetadmin don't seem to send probe/broadcast packets. I have tryed as a user and as root /w no change in my findings. Other PCs on the net don't show traffic in there tcpdump logs. It seams that jetadmin.exe dose not allow you to key in an IP(Currently

Hello everyone, I used to be able to mount an MS NT4 DOMAIN share from a machine running RedHat 9 (Samba v2.2.7a), but after upgrading to WHEL (also tried with SuSE 9.1/kernel 2.6.x running Samba 3 and it appears to have the same problem) (Samba v3.0.4) my samba mount script will no longer work. It successfully mounts the share but I get permission denied errors when attempting to ls -l ,

I've googled for this and poked around linuxprinting.org, but couldn't find anything helpful. I have a CentOS 5 server with an HP LaserJet 4 attached via JetDirect with the hplip driver. The problem is that when I have multiple print jobs in the queue, there is a delay of about 15 seconds between each job. This gets very annoying when there are 10-15 one-page jobs in the queue.

I have 2 printer queues setup on my samba 3.0.6 NT4-style PDC. About a month ago, one of them stopped working due to an issue with CUPS. After restarting CUPS, printing to that share was giving Access Denied. From a windows box, I was able to add drivers and set default print settings as a domain administrator but I still couldn't print. I created a new printer share pointing at the same

On 04/10/2018 05:22 AM, Han Han wrote: > Hi, > I tried to compile libvirt with address sanitizer( > https://github.com/google/sanitizers/wiki/AddressSanitizer) to discover > memory errors. But fails when make. > Code version: > $ git describe > v4.2.0-92-g3f204e4de > > Compile tools: > automake 1:1.15.1-3 all [installed] > clang-7 1:7~svn323616-1 amd64

apply to this (security=domain) case, since auth is via the PDC. So, shouldn't winbind_lookup_sid() be succeeding. Should I be trying to track the failure in that code? In case it's helpful, ldd /usr/sbin/smbd shows: libdl.so.2 => /usr/lib/libdl.so.2 (0x40017000) libnsl.so.1 => /lib/libnsl.so.1 (0x4001a000) libpam.so.0 => /lib/libpam.so.0 (0x40030000) libc.so.6 =>

Anyone manage to print to an NDPS printer. The Server is NW5 and there is no Bindery context or ques. When trying to print a test page I just get and error saying there was an error. I could print as a JetDirect que, but I can't seem to get it to work. I put in the IP address and can ping it, I just can't print to it. It asks for a Que name but I am not sure what to put in for a

>Date: Sun, 29 Aug 1999 17:30:14 +0200 >From: "Florian v. Behr" <fvbehr@gmx.net> >To: samba@samba.org >Subject: jetdirect printer configuration > >I am trying to set up a jetdirect plotter in our network (samba server >running un suse linux 6.2). >When I start printing from on of the windows boxes everything seems fine >but the printing files only