similar to: Winbind and wrong domain

I've been looking thru manpages and online for help..... I *think* I've got winbind mostly setup (somehow) but it seems to be using the wrong Domain. Some info: I am running RH7.3 Kernel 2.4.18-3 Samba 2.2.7 In my smb.conf file I have: [global] security = Domain workgroup = LMC winbind separator = + winbind uid = 10000-20000 winbind gid = 10000-20000 winbind

I had posted about winbind picking the wrong domain to this list about a week ago and this was the problem I was still trying to solve when I must have messed something else up. SO! Winbind WAS working (even though it was picking the wrong domain) I re-ran smbpasswd -j LMC -r <our PDC> -U administrator I get prompted for the password, enter it and I am told that I joined the LMC

Dear all, I am using the nlme package to find the best model using non-linear mixed effects model. After the all the other things needed, I did > M1<- nlme(NShrubs~A*exp(-B*CED),data=DataSg,fixed=list (A~SITE,B~1), random=B~1,start=list(fixed=c (1.66,1.66,1.66,1.66,1.66,1.66,1.66,1.66,0.0038)),control=lmc) and it was ok. However, the data showed to need random parameters at both

CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p at virginia.edu> Cc: Rusty Russell <rusty at rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst at redhat.com> Cc: Shreyas Bhatewara <sbhatewara at vmware.com> Cc: "VMware, Inc." <pv-drivers at vmware.com> Cc: Francois Romieu

CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p at virginia.edu> Cc: Rusty Russell <rusty at rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst at redhat.com> Cc: Shreyas Bhatewara <sbhatewara at vmware.com> Cc: "VMware, Inc." <pv-drivers at vmware.com> Cc: Francois Romieu

Hello, I have a problem with the srptools to connect my Dom0 to the scst over IB ressources. *When i''m on the Debian kernel (without Dom0) * root@blade1:/# ibsrpdm -c id_ext=003048ffff9dd3b4,ioc_guid=003048ffff9dd3b4,dgid=fe80000000000000003048ffff9dd3b5,pkey=ffff,service_id=003048ffff9dd3b4

... Initializing.. hi all, I've a a very basic setup, directly two boxes via two MHEH28-XTC and I cannot activate them. One peculiar thing is I get (randomly & !often): [85947.090496] AMD-Vi: Event logged [ [85947.090539] IO_PAGE_FAULT device=09:00.7 domain=0x0000 address=0x00000000f6ffb000 flags=0x0050] [85947.298509] AMD-Vi: Event logged [ [85947.298550] IO_PAGE_FAULT device=09:00.7

Dear All, I run following code to estimate the blocks using cokriging ( my data set has more than 50,000 data points). All the things run finely but Once I run the predict.gstat function it gave the error message - "memory.c", line 58: can't allocate memory in function m_get(). I run this code on LINUX sever but result is same. Would any one please be able to give a solution for

SAMBA 3.0.21c (domain is LINBOXTEXT) Windows 2000 SP4 (domain is ADTEST) Hello, I've established an interdomain trust relationship between SAMBA and Windows. Samba domain users can log into the Windows domain, but Windows domain users can't log to the SAMBA server. For example, if I try to log as "ADTEST/dupond" from Windows to SAMBA, SAMBA log says: [2006/11/15 20:17:05,

Afternoon all, After doing some test on my asterisk box I can successfully receive calls to my Asterisk PBX to a SIP phone from The Telstra PSTN network Dial out from a sip phone is also not an issue, all calls connect and terminate normally. If I call the Asterisk PBX say from PSTN in Zap1-1 and out through ZAP2-2 back to the PSTN (after entering the correct pin off course) the card does not

Hi, I'm doing a os course at federal university of minas gerais and my final work is to make a change in the linux os. My group decide to create a kind of undelete for ext3. We have already read about this in past threads. What I want to know is how ext3 deletes a file. What it deletes from the inode. thanks. ____________________________________________________________________ Carlos

You'll need to create a trunk between the two systems Then configure your out bound routing to use that trunk Eg if you use 1 as the prefix for the trunk BOX A Ext200 will call box B EXT201 by dialing 1201 -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Ronald Wiplinger Sent: Sunday, 19 June 2005

Hi list, I can successfully build the driver modules; hdlc, dlci, syncppp, and lmc from the 2.6.18-128.1.14 kernel source rpm, and have managed to create a 'wan kmod' rpm. It all works fine for IPv4, but now I need IPv6 for ppp connections, which doesn't work for me. I think I'll need to back port Krzysztof Halasa's 'ppp for generic hdlc' patches to the

On Sat, 17 Oct 2020, Joe Perches wrote: > On Sat, 2020-10-17 at 09:09 -0700, trix at redhat.com wrote: > > From: Tom Rix <trix at redhat.com> > > > > This is a upcoming change to clean up a new warning treewide. > > I am wondering if the change could be one mega patch (see below) or > > normal patch per file about 100 patches or somewhere half way by

On Sat, 17 Oct 2020, Joe Perches wrote: > On Sat, 2020-10-17 at 09:09 -0700, trix at redhat.com wrote: > > From: Tom Rix <trix at redhat.com> > > > > This is a upcoming change to clean up a new warning treewide. > > I am wondering if the change could be one mega patch (see below) or > > normal patch per file about 100 patches or somewhere half way by

Dear R_help list members!   I’m studding forest carnivores and I have data on resting site selection and use!   I’m trying to model the probability that a forest carnivore might have in be located in a tree hollow (1) (the main resting site selected) rather than elsewhere (0) (other resting site types, dens, nests, etc.). The model should be related with several variables such as for instance:  

Hello everyone, I am searching for a covariate selection procedure in a cox model formulated as a counting process. I use intervals, my formula looks like coxph(Surv(start,stop,status)~ x1+x2+...+cluster(id),robust=T) where id is a country code (I study occurence of civil wars from 1962 to 1997). I'd like something not based on p-values, since they have several flaws for this purpose. I turned

Hello, I have two domains: - a domain FRANCE on a SAMBA PDC called "SARGE" - a domain DOMAINTEST on a Active Directory called "SRV2003-2" I followed the samba howto chapter on setting a domain trust relationship between this two domains. For now, I just want DOMAINTEST users to log on shares of the FRANCE domain. On Windows 2003 side, with the MMC I can check/revalidate

I want to config one 50T OST stroage, is it okay? Since I know that the limitation of ext3 is 1XT. Thnaks

Hi all, I'm using Samba from a long date, and i was need to configure it for a client who want to replace his old NT4.0 server (acting as a PDC) I've install Samba version 3.0.22 on an Ubuntu Server (Kernel 2.6.17-10-generic). As my client was interested by LDAP, i've join Samba with LDAP. My Samba Server was first acting as a BDC, then i've vampirise all NT4 account, and all