similar to: Printing Status - Access denied, unable to connect

Hi, Is it possible to manage print queue's via windows clients. I get Access denied, unable to connect. I use the lp daemon to print via JetDirect. I am beginning to think it is not possible. If someone out there is doing this could you please share your configurations with us so it can be added to the samba How-to documentation. Respectfully, Nick

I have a small Samba 2.2.1a plus Win2k workgroup. Samba is running on Redhat 7.2. There is a networked laserjet 5000 using a static IP which I can print to successfuly from the linux box, and from the win2k workstations via the queue on the linux box. The weird thing is that, on the win2k worksations, if I double click on the printer icon the status of the printer is reported as "Access

Hello, I've tried to analyze some data with a CMH test. My 3 dimensional contingency tables are 2x2xN where N is usually between 10 and 100. The problem is that there may be 2 strata with opposite counts (the 2x2 contigency table for these are reversed), producing opposite odds ratios that cancle out in the overall statistics. These opposite counts are very important for my analysis, since

Hello, Currenly I've ASterik@Home 1.5 running on DMZ. I can register SJphone there, good audio on 8200 (webmeet me calls) and i also can dial Zapata extensions. When I dial sip phone extensions nothing happens if the client that i'm calling is registred, if the client has voicemail it goes to voicemail. IMPORTANT: I get this error message on my Check Point Firewall: "sip

I've had a nagging problem for a long time where I cannot connect to my printers from Windows 2000 or XP. I'm using CUPS printing and Samba 3.0.14. I've seen people report a similar problem where they can print, but can't open the queue or manage the printers. The message you get is "Operation could not be complete. Access is denied." I found the problem to be

Hi, I have a problem with my printing setup of a windows XP client with a samba server. The windows driver seems to use different ways of smb/printer communication for printing in normal/duplex mode and for printing brochures. The latter failes silently. normal/duplex printing uses: SMB Open Print File Request brochure printing starts with: SPOOLSS OpenPrinterEx request I recorded the network

I currently have a data frame whose rows correspond to each student and whose columns are different variables for the student, as shown below: Lastname Firstname CATALOG_NBR Email StudentID EMPLID Start 1 alastname afirstname 1213 *@uark.edu 10295236 # 12/2/2008 2 anotherlastname anotherfirstname 1213 **@uark.edu ## 10295236 9/3/2008 Xattempts Q1

I've read the Wiki on using asterisk's built-in transfer options (#8 and #6). They work fine but how does one cancle an attended transfer? Example: I have person on phone, I hit #6 to being att-transfer. I enter Sally's extension. I let it ring for a few seconds. Sally never picks up but her voicemail does. How do I hangup her voicemail and resume the previous call? The example on the

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Greetings. I'm seeing an odd problem with 3.0.10 and 3.0.11 here. We have some pdf printers defined: [Accounting pdf printer] printer admin = "DOMAIN+Domain Users" browseable = yes path = /pdfdropbox/Accounting printable = yes writeable = no print command = /usr/bin/preprintpdf %s -r lpq command = lprm command =

Hi, I have been going crazy over the last few weeks trying to install a new Samba server (using v2.2.1, v2.2.5 and v2.2.6) to replace a old system. Problem seems to be with file locking on the new server - works perfectly on old server!! Attached are configuration files for Samba for old (smb205.conf) and new (smb226.conf) servers, plus the source of a Cobol test program (samtest.cbl) that

OK, I have been wrestling with this for two weeks now, so somebody please help ! We have an existing Samba Print Server, running RedHat linux, kernel 2.2.19, that runs fine, but is a P133 with 64 mb ram. So we built a new PC, the slowest thing we could buy, a duron 1 ghz with 512 mb RAM. Old printer server is running Samba 2.2.5, new printer server is running samba 2.2.5, and Slackware 8.1,

Hi all, When i try to install one printer shared by a samba server (3.6.6) in a Windows 7 (x64 home premium and professional) clients, i get "The print processor does not exist" and i can not install nothing. All printers are mapped through .bat file, using "net use" command, specifying user/password. I always install like this: in run window (win+R), type the samba server ip

I am attempting to get printing services for Windows 2000 clients working with Samba on a Red Hat 7.2 box. The problem is I can not cancel print jobs (either from a PC or the local smb client). File sharing, and printing other than this problem, work fine. Here is a listing of configuration and system info: 1) the samba packages installed, 2) output of "uname -a", 3) the

I'm running Samba 2.0.3 from the pre-built binary (ftp://sunsite.org.uk/packages/samba/Binary_Packages/solaris/samba-2.0.3 -sunos-4.1.3.tar.Z) on a Sun IPX with SunOS 4.1.3_U1. I've defined a printer in smb.conf, from a PC (NT 4.0) I can send prints to it and view the queue OK but I can't manage the queue in any way. Attempts to cancel prints and stop or start the queue from the PC

We have been using CUPS to handle printing and have run into some "features" some of which a fresh install of the responsible server will probably fix. However there are some disparities between the documentation and our practical experience for which a clear statement would help others. The docs state when using CUPS the relevent lines of SMB.CONF should look like this: printing=cups

Here is my printer config: printing = lprng load printers = yes use client driver = yes printer admin = @edutec, root printcap name = /etc/printcap print command = lpr -U%U@%M -r -P%p -J'%J' %s lpq command = lpq -P%p lprm command = lprm -U%U@%M -P%p %j lppause command = /usr/sbin/lpc -U%U@%M hold %p %j lpresume command =/usr/sbin/lpc -U%U@%M release

Hello Family, (smb.conf file attached) Well I was here messing with the smb.conf file and don't ask me why or how but here it is and it prints to the Epson777 Stylus color inkjet with a "Edimax Mini Print Server" attached to the back with a static IP from Windows2000. The only slight quirk is that the "Epson Status Monitor" pops up looking for the printer trying to

All, I have the following in my smb.comf for printing commands... # NOTE: If you have a BSD-style print system there is no need to # specifically define each individual printer [printers] comment = All Printers path = /var/spool/samba browseable = no print ok = yes print command = /usr/bin/lpr -P%p -r %s lpq command = /usr/bin/lpq -P%p lprm command = /usr/bin/lprm -P%p %j

Hi, We've been stuck with this problem for a while now and we believe I tried enough potential solutions to justify my posting here. We're using samba 3.0.14a in Sarge in order to allow printing from Windows workstations (The authentication works with AD+Kerberos+Winbind) to a set of shared printers. Printing works perfectly but we would like to allow users to have control over the jobs

Hello, I have a new RH 7.2 installation (kernel 2.4.7-10) with Samba 2.2.1a and I can't print from my Win2K box. I get an "Access denied: unable to connect" error from the printer entry in Windows. The logs don't seem to be helping me. Here's my smb.conf file: [global] workgroup = MYGROUP server string = Samba SMB Server interfaces = 192.168.1.1/24 127.0.0.1/24 hosts