similar to: signal 11 on fsck

Apologies if you get this twice - the first one didn't seem to make it... Hi Guys, I have just replaced a faulty Max...woah, wait...this one's a Seagate... IDE hard disk but I cannot remake the software raid pair. The currently running disk is hda and I am trying to add back hdg - both are master drives on separate controllers. I have run fdisk on hdg and created the same partition

Hello, My machine is running Software RAID 5 on /dev/hde1, /dev/hdg1,/dev/hdi1. I noticed on the log that suddenly we are getting messages such as : Oct 14 01:27:16 localhost smartd[4801]: Device: /dev/hde, SMART Prefailure Attribute: 8 Seek_Time_Performance changed from 247 to 246 Oct 14 01:57:15 localhost smartd[4801]: Device: /dev/hde, SMART Prefailure Attribute: 8 Seek_Time_Performance

So you know, I don't know too much about file systems. Here is what I did: I have two linux boxes. the first box had many hardrives in it, but needed to be used in other ways. So I took 4 harddrives out of it and placed it in the other Linux box. I thought it would be able to read these right away. (maybe this was my mistake?) I could mount all of the drives in there. three of my

I am trying to upgrade my system from 500GB drives to 1TB. I was able to partition and sync the raid devices, but I cannot get the new drive to boot. This is an old system with only IDE ports. There is an added Highpoint raid card which is used only for the two extra IDE ports. I have upgraded it with a 1TB SATA drive and an IDE-SATA adapter. I did not have any problems with the system

Hey all, well, first of all (even if it's quite late as it's in version 3.0.7 already): thanks a lot to all who are developing and supporting Samba! I'm new to Linux and I really like the way things are happening on this OS. But now, I've reached a point where I have to raise the white flag... It seems to me like - at least my - software raid can't dance Samba. I've got

I recently came across an enormous cluster of x86 clone machines running fedora core 1 (2.4.24) which have typically all intel or amd have VIA IDE chipsets. They frequently experience corrupted journals rendering the ext3 partition in read-only mode. More important than recovering the filesystem, I am interested in finding the root of the problem. The common hardware that all of these

I am working on a Red Hat 7.2 system which has been upgraded to the 2.4.9-13 kernel RPMs. The my machines has RPM e2fsprogs-1.23-2 installed but the upgrade from ext2 to ext3 was done manually rather than accepting the offer in the 7.0 to 7.2 upgrade. I did this by running tunefs2 -j on two partitions. I have had some problems following the instructions in the ext3-usage.html

Hi, I have installed Samba on a Debian machine. I have created 2 shares on these filesystems: /dev/hde3 71G 33M 71G 1% /storage/1 /dev/hdg1 75G 8.8G 66G 12% /storage/2 As you can see, both have in excess of 60GB free space. When I try to copy files to the filesystems via Samba, an artificial limit is being imposed - at around 8.8GB. From windows I get

Hi, I cannot seem to find a good answer for what I am doing wrong; I am simply trying to rsync a directory from one large disk partition to another disk, both ext2, on the same physical system by using the command: rsync --archive -v /etc /mnt/hdf/ I systematically get the following errors: # rsync --archive -v /etc /mnt/hdf/ building file list ... done etc/ etc/mtab etc/ntp/drift

On Wed, Aug 5, 2015 at 9:12 AM, Bowie Bailey <Bowie_Bailey at buc.com> wrote: > I am trying to upgrade my system from 500GB drives to 1TB. I'm going to guess that there are no IDE drives that have 4096 byte physical sectors, but it's worth confirming you don't have such a drive because the current partition scheme you've posted would be sub-optimal if it does have 4096

I get the error when trying to start backgroundRb 1.0.3 running on Rails 1.2.6 ./backgroundrb start ./backgroundrb:11:in `require'': no such file to load -- /var/www/test/vendor/plugins/backgroundrb/config/boot.rb (LoadError) from ./backgroundrb:11 is 1.0.3 able to run on rails 1.26 ? this was my thought as to why it wasn''t working unfortunately i cannot upgrade rails

Today our server had seriuos problems, we had to reinitiate it and run fsck manually. Dou you think it's an ext3, kernel (vanilla 2.4.19) or hardware bug? The errors were (from syslog): -------------------------------- Oct 6 16:10:25 nou kernel: attempt to access beyond end of device Oct 6 16:10:25 nou kernel: 72:02: rw=0, want=230266240, limit=4882432 Oct 6 16:10:25 nou kernel: attempt

On 02/02/2016 06:29 PM, Frank Cox wrote: > On Tue, 2 Feb 2016 18:02:40 +0100 > H wrote: > >> What do people use as a programming editor on CentOS 6? > I personally use Geany and/or vim, depending on what I'm doing and how I'm doing it. > > You can find pre-compiled rpms for the latest version of geany for Centos 6 and 7 on my website if you want them. (The Centos 6

On 02/28/2016 06:53 PM, Frank Cox wrote: > On Sun, 28 Feb 2016 16:30:44 +0100 > H wrote: > >> I initially downloaded geany 1.24 from the EPEL repository but now >> wanted to install the plugin package which is not in EPEL. I visited >> your webpage , downloaded the Centos 6 x86_64 version of both geany 1.26 >> and the and lib-geany, which I assume is the

Hi, Theodore, Thanks for your tests. But I got the problem and got it FIXED by flushing out the contents of /etc/blkid.tab before cloned clients reboot. I'm using the e2fsprogs-1.34-1 comes with Fedora Core 1. hello06.alexa.com root 135% rpm -qf /sbin/fsck e2fsprogs-1.34-1 hello06.alexa.com root 136% and the original contents in /etc/blkid.tab are attaching below, while my

Folks, I have three dataframes storing some information about two currency pairs, as follows: R> a EUR-USD NOK-SEK 1.23 1.33 1.22 1.43 1.26 1.42 1.24 1.50 1.21 1.36 1.26 1.60 1.29 1.44 1.25 1.36 1.27 1.39 1.23 1.48 1.22 1.26 1.24 1.29 1.27 1.57 1.21 1.55 1.23 1.35 1.25 1.41 1.25 1.30 1.23 1.11 1.28 1.37 1.27 1.23 R> b EUR-USD NOK-SEK 1.23 1.22 1.21 1.36 1.28 1.61 1.23 1.34 1.21 1.22

It has been 3 months since the last stable release of libguestfs. I'd like to plan a new 1.26 release towards the middle/end of next month. There are some virt-builder features I'd like to get in before then: - virt-builder needs to be able to use Linux distro published cloud images as a source (without requiring a lot of manual config as now) - virt-builder must be able to

I am a new user of R so please bear with me. I have reviewed some R books, FAQs and such but the volume of material is great. I am in the process of porting my current SAS and SVS Script code to Lotus Approach, R and WordPerfect. My question is, can you help me determine the best R method to implement the Hoaglin Outlier Method? It is used in the Appendix A and B of the fo llowing link.

I don't understand which is the problem Could you help me please? Thanks in advance Marta > str(data_indiciN2) 'data.frame': 200 obs. of 36 variables: $ gruppo: Factor w/ 2 levels "0","1": 2 2 2 2 2 2 2 2 2 2 ... $ I001N2: num 19.32 8.22 28.35 7.24 14.7 ... $ I002N2: num 2.92 2.54 0.11 1.6 7.12 ... $ I003N2: num -22.362 -0.222 -19.291

Hi, I posted a question (bellow) a few weeks ago and had a reply (thanks Christian) that partly solves the problem, but I still would like to be able to restrict some of the independent variables in a nls model to be always >0, (is there a way to do it)?? Thanks, Angel >From: "Christian Ritz" <ritz at dina.kvl.dk> >To: "Angel -" <angel_lul at