similar to: Slow Samba Printer initialisation, status, and printing

Following the "security = domain in Samba 2.x" document in the SWAT documentation page I do this: root@pc194-79:/usr/local/samba/bin# smbpasswd -j MDU -r pv-mdu-server1 -Ujohnm%xxxxxxxx Joined domain MDU. root@pc194-79:/usr/local/samba/bin# This is in [globals]: security = DOMAIN encrypt passwords = Yes password server = pv-mdu-server1 pv-mdu-server2 And now I start Samba via smbd

Trying to set up a SAMBA print server using SlackWare 8.1. Have successfully joined it to the domain, but cannot browse into the shares, as it constantly asks for a password, and refuses to accept any including root and NTamdin accounts. Anybody have any ideas error logs and smb.conf are below. This is from the machine specific log file: [2002/08/21 11:41:56, 0]

I have done one succesful driver for downloading to my windows 2000-client. When i try set another with "setdriver " I get a result as : SetPrinter call failed! The only differens between them is in the desritption-field flags:[0x800000] name:[\\localhost\HP4600] description:[\\localhost\HP4600,HP4600,H4600] comment:[H4600] flags:[0x800000]

<It seems that the print command is trying to find the printer at location 'localhost'. Since this is a network printer it is not at localhost is it?> Yeah, the error messages made no sense to me either! Well, like I said earlier: < The IP address of this printer is 10.1.1.192. I call this printer nero, and have it listed in my /etc/hosts file> Here is a copy of part of my

If anybody could help this would be much appreciated... Samba being used with Domain security, as a printer server with an NT 4.0 PDC and BDC. Can browse file shares, can act as printer admin (FINALLY !!), but cannot upload printer drivers, have created print$ share, have created W32X86 and WIN40 directories. When I try to print I get the following error message in machine specific log,

Hi, I've recently installed LPRng 3.6.22, ifhp 3.3.19, and Samba 2.0.7 on my FreeBSD 4.1 system. Printing works fine from the FreeBSD machine, and I am able to access shares via my Win2000 machine. I've configured a [printers] section in smb.conf, and I am able to see the LaserJet 2100 when browsing, but on installing it I am unable to print to it. I get en error connecting the printer

Anyone successfully using a HP 8000 DN or HP 5 Lsi (with JetDirect module and assigned IP) with samba? Subject says it all. If you're successfully doing this, what configs made it work? FAQs tell how to set up with a print server, but what if the printer itself is the server? Trust me, the HP doesn't know jack about port 139. Using samba 2.0.4 on Solaris 7 and NT 4.0 SP5 with

On Oct 12, 2014, at 8:28 PM, Gene Heskett <gheskett at wdtv.com> wrote: > Its unk because whats plugged in seems to be blocking the rear name plate. > About all I can recall is that its big, 3 battery unit, rated somewhere > north ob 1250 VA. > > Its an 050D:0751 Belkin. > > What driver should I use, and what file is that set in? Looks like it is in usbhid-ups. If

Hi there, I own a domestic lan with two computers, mine and my mother's one. Mine is called GREENDEMON and the other one is called BLUEDEMON and they both are configured to run on the REDLOCAL workgroup. I've Debian Woody running on GREENDEMON and Windows 98 running on BLUDEMON, with an attached Nec Silentwriter Superscript 610 printer. This printer is only compatible with Windows 9x

Greetings; Its unk because whats plugged in seems to be blocking the rear name plate. About all I can recall is that its big, 3 battery unit, rated somewhere north ob 1250 VA. Its an 050D:0751 Belkin. What driver should I use, and what file is that set in? The nut version presently and freshly installed is from the Ubuntu 10.04.4 LTS repo's. Probably old, but IIRC it also worked with

Hello, I just moved from SuSE 7.0 to SuSE 7.1 by reinstalling. I use HP 2100TN JetDirect printer. I use kernel-2.4.2, LPRng-3.6.26, ifhp-3.4.4, Samba-2.0.7 Printing from Linux server works just as before. Printing from Windows clients has problems. I set it up just like before but any print job from Windows takes its while and then spits out junk: -------------------------- ERROR: timeout

For some reason, our HP8150DN printers hang with this error and require power-cycling after a user tries to print any job from Windows2000 or NT (including a test page). The Samba server is running 2.2.5 on a Solaris 2.6 box using Sun's printing system. It forwards all jobs to another Solaris machine that runs LPRng-3.8.2 and ifhp-3.5.1. I am able to install and use all of our printers

I know this question has been answered here a while back, but I have not been able to find the mailing with the posts on it. -----==========----- I have a redhat server that I am using as a file/print server for student use. I am using samba to help the users with Windows. The problem I have is that when using printing a user can submit a print job, and it prints fine, but cannot see the

Hi, I set up Samaba 2.2.7 on a RedHat 9 box to act as a print server. The Samba server is a member of the domain and will be sharing about a dozen printers. I am using lprng in conjunction with ifhp in order to do charge-back print accounting. But here's the glitch: the server is not hosting any file shares and basically has only a couple of local accounts. The result is that when domain

Well I've tried everything that was suggested with my printer (HP4MP, That has a postscript interpiter). Including installing lprng, and ifhp, and no go.. If I just print from linux, (lpr -P filename.ps) it prints beautifully. If I print with the filters, I will either get just the Win98 Print test logo then some junk, or I get a stack overflow error Illegal Character @@ .. If I get rid of

Does anyone have any hints or suggestions on getting some JetDirect-based printers set up for bidirectional printing in Samba? We're using LPRng 3.8.0, ifhp 3.4.7, and samba 2.2.2 From the LPRng standpoint, the printers seem to be set up for bidirectional communication fine.. but how do we get Samba to allow bidirectional communication? Thanks in advance! Glenn --- Glenn E. Sieb,

Hi, I've been toying with the idea of using the Linux machine as a print server. I'm using RedHat 5.2 and Samba 2.0.3. I already have one remote printer share working... but I can't figure out where the PrintTool in RedHat is storing the remote printers IP address. Anyone know where? :) (not important just bugging me - I hate when OS's hide stuff) I have the Samba book

Hey, I posted a few days ago about how the printer paper sizes are differ from the admin account when they are installed. People at my work are getting pissed at the moment and all they want to do is to be able to change the paper sizes themselves and not have it done at the server Is there a way to do it? I fluked it at one stage and had it working like that, I think I deleted the driver

Hi, I've recently set up LPRng on my system in preparation for moving my organisation to a Samba/Linux based printing solution. I have a test printer properly set up, and issuing lpr commands from the command line works fine. I also have Samba set up with domain security and all the file sharing is also working OK. Whenever I try to print a test page to my Samba shared printer, I get the

Morning... Just spent this evening getting printing setup off my FreeBSD machine (oh, how I love Solaris at these times *groan*)...got it now so that I can print directly from Netscape, color and graphics and all. The printer is an HP 560c. Now, I want to be able to print from my Windoze95 machine, and have samba setup for that, as well as file sharing. If I setup my Windoze machine such