similar to: Windows client refuses multiple print copies when printing to samba printer

Hi, I successfully setup printing on my FreeBSD box using Samba with apsfilter and lprng. However, I have encountered two issues: 1) Cannot print multiple copies of documents from my windows box (e.g. notepad). Only the first copy is printed and the rest don't get printed. 2) My spool directory is getting filled up and I would like the job removed after the print job is finished I've

I made some comments. Maybe the solution is easy. > ##PRINTTOOL3## LOCAL > lexmarkz53:\ <---THIS AND LP BELOW SEEM TO BE DUPLICATES. > :sd=/var/spool/lpd/lexmarkz53:\ > :mx#0:\ > :sh:\ > :lp=/dev/lp0:\ > :if=/usr/local/lexmark/z53/z53.sh: > > ##PRINTTOOL3## LOCAL > z53-outfiles:\ <----THIS IS THE RAW SPOOL YOU'LL WANT YOUR

I am using Slackware 10.2 (kernel 2.4.29) and Samba 3.0.21c for my print server. The client workstations are WinNT4. I have two printers on the linux server..an HP DeskJet 600 and an Okidata B4250. I can install and print to the HP from any of the workstations. I can install the Okidata just fine, but when I try to print from Word, Excell, or any application Dr. Watson comes to visit. I get

Howdy all - I have Samba 2.0.3 running like a champ on a dual PPro 200, 128 MB RAM, running Slackware 3.6, kernel 2.2.5. Running like a champ as far as file sharing is concerned, that is. I have an HP Deskjet 1000c hanging off the parallel port. I set up a raw printer in /etc/printcap, the line looks like this: dj1000|DeskJet 1000c:sh:lp=/dev/lp0:sd=/var/spool/lpd/dj1000 the printing section

Hello, I have just started using samba a couple of weeks ago. I am using Slackware 9.1 and windows 2000. i can see everything. on my windows box i can see my linux box and visa versa. but i have a HP deskjet 932c on my linux box and i want to be able to print from windows. windows can see the printer in network neighborhood but it says that it is unable to connect access denied. i

I have a Deskjet 690C connected to my machine running RH7.1 + linux 2.4.13 + samba 2.2.2 installed from RPM. I have setup the printer with RH's printconf-gui as a local printer. In local use it works fine. I have the following in my /etc/samba/smb.conf: --<snip>-- [global] security = share printcap name = /etc/printcap load printers = yes --</snip>-- and

I'm currently having a problem with the new released Samba 2.2.5: I cannot print anymore on my shared printer. What is strange is that It worked fine with samba 2.2.4, but now I got an access denied whenever I try to access the printer... /var/spool/lpd/samba is chmod 777 and the username is in the group lp Here is part of my smb.conf: [global] workgroup = HOME netbios name =

I have encountered a strange printing problem with Samba 2.2.4 running under HP-UX 11i. In the process of investigating a printing problem, I have found that Samba has stopped passing jobs along to the UNIX lp spooler as of yesterday afternoon. When NT/W2K clients print to printers on my server, the jobs are accepted, Samba spool files are created in the spool directory defined for the printer

I've discovered a couple of things while troubleshooting my printer setup problems. 1. print$ must be 0744. I ran a level-3 debug, and was seeing "chmod failed" errors. Upping it to level-10, I saw something that pointed to unix rights of 0744; my dir's were set to 0755 or 0777...neither worked. When I set print$ and it's subdir's to 0744, the chmod errors went away.

Hi, I ve had some problems printing from NT, I had samba 2.0.3 and every time at the end of document there is a blank paper and I don't know how I can stop this ??? Regards, and thanks in advance for any help Amin.

Is there one can give me some information on how to setup printer in Samba so windows can print to it. My file sharing works fine. In winows can't see the printer. Thanks Matthew Wu School Loans Corp. 10780 Santa Monica Blvd, Ste 225 Los Angeles, ca 90025 Tel. 310-474-7456 ext.235 Email mwu@higheredloans.com

Morning... Just spent this evening getting printing setup off my FreeBSD machine (oh, how I love Solaris at these times *groan*)...got it now so that I can print directly from Netscape, color and graphics and all. The printer is an HP 560c. Now, I want to be able to print from my Windoze95 machine, and have samba setup for that, as well as file sharing. If I setup my Windoze machine such

I have a bit of a problem, however, I am not sure if it has been solved, or what. I have: RedHat Linux 7.2 samba version 2.2.1a Client machine is Windows NT 4.0 (Service Pack 5.0) Printer: using an NT driver on an NT machine configured to print to the port-'file'. problem: I am trying to print a file on a samba file server to a "printer". When the file is stored on an

Good Afternoon, We recently added encrypted smb passwords to our site. I just tried to add a printer to samba and it will not work. I tried to connect to \\sambahost\printer and it will not connect. All the older printers still work. I just wonder if there is an extra step I need to perform now when I add printers? Thanks for your time, Bill -- William M. Fennell Network Administrator

Hello. I use Linux 2.0.30(Red Hat) and Samba 1.9.16p. Clients are Win95, NT Workstations and Servers. I use Linux like printserver and bridge. And I have problem with my printer HP LaserJet 4MV with JetDirect card. It print 1 test page( or another 1 page) and print after it second page: User: root Host: LINUX Class: LINUX

Hey, I posted a few days ago about how the printer paper sizes are differ from the admin account when they are installed. People at my work are getting pissed at the moment and all they want to do is to be able to change the paper sizes themselves and not have it done at the server Is there a way to do it? I fluked it at one stage and had it working like that, I think I deleted the driver

I have Samba 2.2.7 running on Redhat 8 (fully updated). I have two printers set up - a laser and a Deskjet 920C both connected to the Redhat server via USB cables. Printing is managed using CUPS although I get the same problem with LPR and Webmin configured printers. The laser works fine, the deskjet doesn't. The deskjet works with a generic windows HP Deskjet or HP Deskjet plus driver in

I've got Samba 2.0.3 running on my Linux box. Marvin is the samba server. Bugs is the NT box. Attached is the relevant part of my smb.conf file. I removed several parts from what's attached to save bandwidth. What you see is simply the part that pertains to my printer. I can't print to the DeskJet printer. The printer appears in my network neighborhood, but I just can't get

I have [global section] [global] printing = cups cups server = desktop printcap name = /etc/printcap load printers = yes [HP DeskJet 5700] comment = HP Deskjet 5700 map to guest = Bad User browseable = Yes guest only = Yes path = /var/spool/samba guest ok =Yes public = Yes printable = Yes printer name = deskjet-5700-1 use client driver = Yes yet when I try to add this printer,

Ok, I've managed to print to my HPDeskjet 694c attached to a Solaris 8 box running samba 2.2.2 from Win98. Problem is with the left margin, there are these little lines (garbage) running down the 1st column on the left side of the page. Also, when I print a page from Word 97, the whole page doesn't print (about 95% of it) and starts a little too far down the page. Printing was perfect