similar to: Windows NT PDC and Samba PDC cross subnet browsing?

Hi everyone, I think I solved it: - I installed WINS on both sides on the PDC's (Samba on the one end, NT on the other). - On both subnets the clients are configured by dhcp to use their own PDC's WINS as their primairy WINS server and the WINS on the remote PDC as their "secondairy" WINS server. - TCPIP configuration on the Windows NT PDC configured to use it's own WINS

Been experimenting with Samba as a WINS server. Need a WINS server as I am using VPN tunneling. My goal was to set up a central WINS server and have all the computers talk to it for NetBIOS name resolution. In the end I was hoping to have only one Samba server. I have currently worked with: Samba 2.2.7B on a uclinux. Samba 3.0.10 on RedHat. Samba 3.0.10 on Slackware. Samba 3.0.10 on FreeBSD.

hi there, can please anybody help me solve my little problem ? I have about a dozen separated networks connected to my local lan via isdn dial-up (on-demand). I am running linux kernel 2.0.36 and samba 2.0.0 (2.0.2 doesn't work either). There is a linux-box running samba 2.0.0 connected to every remote network. The Clients are always Win95/Win98/WinNT. Local browsing seems to work perfectly.

I think you need a DMB and LMB. Assuming you have no NT servers in your network, try these in [global]: domain master=yes preferred master=yes local master=yes os level=65 Note that if your other workgroups are on separate subnets, this gets trickier, involving WINS, etc. Steve Litt At 09:09 PM 02/16/2000 +1100, you wrote: >Hi all, >can anybody explain why win9x (or i think also NT) from

Hi How do I get the following browse-setup to work? --------- | A | |Linux | --------- WG1 192.168.10.0 | | WG2 192.168.10.0 ---------------------- ----------------- | | | -------- -------- -------- | B | | C | | D | |Win98 | |WinNT | |Win98 |

I have been having a heck of a time getting cross subnet browsing to work properly. After MANY hours hunting through source and debug logs, I have FINALLY found the source of my browsing issues. My Samba nmdb properly becomes the LMB for my segment on a WAN. I VPN to my servers at the home office and Samba attempts to sync with the DMB. nmbd properly locates the DMB via WINS over the

Hello, I have the following setup and problems and wanted to ask if anyone could help. Network 1 -- 192.168.1.xxx ----- Network 2 -- 192.168.2.xxx |------ Switch with port based vlan and a Samba Server which | | is placed in all port based vlan's and has ip aliases | |

I have problems to get browse lists from other workgroups across subnets. On win95 network neighbourhood I have a complete list form all computers in the same workgroup (including computers located on an other subnet) and a workgroup list. But if I try to look at the computers on an other workgroup I get an error message: workgroup not available. The subnet has an samba server (2.0.3) configured

PROBLEM: Cross-subnet browsing is not working. Browse lists on all machines contain only the machines on the local subnet. SUMMARY OF ANALYSIS: The Local Master Browser (LMB) running Windows XP (ZAYIN) never contacts the Domain Master Browser (DMB) running Samba (BETH) to initiate a synchronization of browse lists.

Hello ! I have a problem of syncing browse lists between DMB and LMB. The topology of ours network is as follows: Linux Network comma(Linux, DMB, WINS) vol(Linux) door(Linux, LMB) | | | | | | | | | --------------(195.226.226.16/28)------ | | | | | | | --(local net

Hello, As subject says I am working on browsing and access servers, which are dispatched on two subnet, in one workgroup named "WORKGROUP". First here the network : ( I don' t use ASCI art 'cause I am not an expert on that and it may not be printed as it was emailed. ) So, there is five machine : - one, under debian 6, which is the gateway - two, under

Hi all! I am using samba server at the company i work. Samba version is: 2:3.2.5-4lenny9 Some settings: os level = 255 domain logons = no wins support = yes domain master = yes local master = yes preferred master = yes i have dhcp configured witch sends wins server address (this samba servers address) to all clients. After I (re)start samba within a minute or so all computer of our network

(Samba version 1.9.18p4) I want to set up my environment thusly: - 2 workgroups, each composed of multiple subnets. - Each workgroup has a DMB and a WINS server (Samba only - no NT) - The two workgroups should collate browse lists so that clients on either workgroup can browse and connect to hosts on the opposite workgroup. I've read the documentation in BROWSING.txt and it does not appear

I'm trying to set up cross-subnet browsing using Samba on a Linux box and a Sparc UltraEnterprise with Win95 and NT Workstation clients. I'm using the Sparc as the domain master and also as the WINS server on the 108 subnet. The Linux box is the local master on the 46 subnet. Both are running Samba 1.9.17alpha4. I can see the conversation between the two samba servers and the browse

I am still trying to make samba work over a WAN with multiple workgroups although I am just about to throw in the towel. I had hoped to find a solution that would permit a Windows PC to browse a (MS) workgroup (ie retrieve the browse list from the workgroup master browser for a remote (MS) workgroup when that MB is NOT a samba server). Since WINS only provides the broadcast address of the remote

Hi, I'm trying to set up browsing across subnets to provide an 'enterprise'-wide (sorry for the MS term ;-) browse list / Network Neighbourhood. I've read BROWSING.TXT, but I can't see how machines on different subnets in different domains/workgroups sync up (using Samba, anyway). On my local subnet, I've set up a clunky old Linux 386 (Samba 1.9.18p8) as the browse

> I suggest not, normaly dns is used for that, by the setting > "dns proxy = yes"  ( the default ) > But you must be sure your dns setup is good. I knew of that solution already, in fact I use it on my own network. > Anyway, what im missing here, is, is this a ADDC or member server setup. > And which node type is set for the computers. Hi, perhaps I should have

Hi, during the past weeks i tried to set up a network through a cipe tunnel, building a vpn to some road warriers. With few words, the tunnel is etablished, and at the tcp/ip level everything works fine. NET A : 192.168.0.0/26 NET B : 192.168.102.0/26 trans-net : 192.168.101.0/26 in ascii-art, it looks like this: eth0:192.168.0.5 +-----------+ cipcb0:192.168.101.1

Note: LMB = Local Master Browser DMB = Domain Master Browser Have Samba 2.2.7A running embedded in a variant of ucLinux. My interest was only to use Samba as a WINS server. I've set up the SMB.CONF with this config. for one test: wins support = yes local master = no domain master = yes preferred master = no os level = 0 I've set up the SMB.CONF with this config. for the other

> I've been having troubles getting cross subnet browsing working in > existance with a WinNT domain master (hey, it's not my machine). > Basically what is happening is that I am trying to setup a VPN (which > shouldn't complicate things) that browsing will work across. The idea is > this: > > There is an office in my local city that I'm connecting San