similar to: Printing from W2K clients

Hello, As I understand * don't supports T.38 in Zap channels (please correct me if I'm wrong, BTW is there plans for such support?) I believe it's should support T.38 in "pass-thru" mode. I mean setup like this: Hardware gate with T.38 ------ Asterisk ------ Hardware gate with T.38 But I had troubles with this setup (no faxing) while two gates conneted directly with same

Hi guys. I have a XP100P Clone , and the busydetect dont work for me.. PSTN---Asterisk---Sip---Asterisk----PBX Any call from pstn side dont disconnect ... I have no disconnect supervision and busydetect dont work... Please Help me. Zapata.conf [channels] echocancel=yes usecallerid=no hidecallerid=no rxgain=0.0 txgain=0.0 signalling=fxs_ks callprogress=no context=entrada channel=>1

Hi all, I get "Unknown RTP codec 72 received" message in console when call in progress, but all seems OK. Calls is from X-Lite SIP softphone to PSTN over voicepulse connect (IAX) and to FWD echo test (SIP). But this message only with one SIP client, others (X-Lite too) not giving this message. All X-Lite settings are identical. Asterisk is last cvs version This what I see in console

Hi, I need to send and receive faxes over VoIP in realtime. I mean: user ? calls from VoIP network to fax machine on PSTN, but starts voice conversation with user B on that fax machine. Then users agree to send a fax (any direction), pressed "start", completed fax transmission and then continue a voice conversation. This is one of generic ways to use analog fax machine. As I understand

Hi All, I need to replace old analog PBX with Asteriskl and X-Lise SIP SoftPhones as client phones. First: I have problems with implementation of PBX functions. I need and unsuccesfully tried theese functions (took info at http://voip-info.org/wiki-Asterisk+PBX+functions) Call Pickup: Supported in the standard installation (*8 - defined in res_parking.c +54) - Just don't understand how to

Hi all, I'm having trouble with H.323 outbound calls, * connects but there is no sound in both ways. I'm using X-Lite as SIP client with GSM codec and dialing to ITSP (which using cisco, I think) over H.323 with G.729 codec. I have 4 digium G.729 licenses installed and this is onli one call. I tested my * with another ITSP over SIP and G.729 codec and there was all ok Here is my configs

Hello, Could somebody tell me is it possible to use asterisk without RTP proxying in SIP<->H323 calls? I mean exactly what canreinvite=yes option do in SIP<->SIP calls. I don't need a transcoding, only a signaling conversion, and this is possible with some softswitches, so i wondering what about asterisk. Same question about H323<->H323 calls I'm using NuFone

Hi, I'm using D-Link DG-104SH (H323 4 port FXS gateway) with analig phone connected to it and X-Lite softphone as endpoints with * When I calling from X-Lite to analog phone it's ok When I dilaling X-Lite from analog phone, X-Lite si ringind but whei I picked up X-Lite connection drops IP of DG-104SH is 192.168.1.3, H323 ID is GW1 X-Lite number is 233 Here is * output: -- Executing

asterisk-users-bounces@lists.digium.com wrote: > Isn't it possible to use T.38 for interconnecting hardware gates > supporting T.38 with asterisk using SIP REINVITE? > I'm not shure but but think its's might be possible because after > reinvite traffic goes directly from one gate to anotger, not over > Asterisk We've seen a problem here with asterisk. Wehn

Sorry about this, I have been struggling with the basics of my asterisk config. I set up two sip peers and two phones. And I set up lots of dial masks for outgoing calls, all my outgoing calls were working great, however incoming calls were a different matter altogether, I cannot get incoming calls to work. So I have gone back to a very basic FWD config, with one phone which as far as I am aware

Hello everyone! I tried to send a fax over SIP with an Asterisk Server in the middle (no Digium Cards, etc. installed, everything is SIP only, the PSTN-Gateway is external). Whenever I start sending a Fax to a PSTN destination, the Call gets answered and asterisk tries to build a native bridging: -- Attempting native bridge of SIP/sip.westend.com-082fd1b8 and SIP/xxx-3ef8 Then the following

Hello, I'm following the thread "Asterisk@Now vs Trixbox", and I have a similar question: if someone is going to install Asterisk, FreePBX and A2Billing, should you advice him/her to use Trixbox ... or a custom "step by step" installation on a distribution of his/her choice? Thanks Stefano

Dear R community, I would like to create my own R package files, but I find some problemm for R versions >1.9. When in previous versions of R I could write a simple text file, to have a functioning file package, now I found that is neccessary to implement also binary copies of the file. I cannot understand, reading from R manuals, how it is the correct procedure to create these binary files.

Dear all, is asterisk capable to make a call for 24 hour without break ? My dial string in extension.conf is : Dial(SIP/[ext_no]@[pbx_name]) I dont use any dial parameter. The problemm is, my customer complain that the call was cut after 4 hours. Thanks in advance, Ikka Jakarta, Indonesia -------------- next part -------------- An HTML attachment was scrubbed... URL:

I finally got my drivers to upload to the print$ share by using the add_print_package.pl script form imprints, and I was able to attach the driver to the printer created with SWAT (the rpc command: addprinter does not work) by using the rpc command: setdriver. So at this point whenever I connect a client to the machine it no longer asks about trying to find a driver. However when I go to open the

Dear Community, I've a Work -Shift Scheduling Problem I'd like to solve via constraint linear programming. Maybe something similar to http://support.sas.com/documentation/cdl/en/orcpug/63349/HTML/default/viewer.htm#orcpug_clp_sect037.htm Can anybody suggest me any package/R examples to solve this? If it's needed more details of my little problemm I can provide. Thanks in

Helo, I have a troubles getting to stable work of Digium TE110P card (mailed some time earlier in the list) - I can't get 100% pseudo zap interface accuracy (zttest), so getting HDLC aborts and call drops. I tried number motherboards, hardware and software configs according to info in wiki, thisl list and number of websites - no luck. So I ask everyboby who successfully use Digium TE110P card

Hello, I have very annoying problem with asterisk 1.4.4: Every evening when I have peak load asterisk crashes, "peak load" is only over 20-30 sip-to-h323 simultaneous calls. Nothing special in logs after crash. Load average never was higher than 0.3, asterisk never uses more than 12% CPU (according to top). Tried SVN versions - same result. Both h323 and sip peers has only one codec

Hello, I try to install on my ubuntu ruby on rails server. I have install ruby,rails,gem and all files but doesn''t work. When i run the server with webrick works perfect but when i use apache i get this message: We''re sorry, but something went wrong. We''ve been notified about this issue and we''ll take a look at it shortly. Here are my installed app versions:

Hi @all, I cannot use this patch in 2.2.5. I patched the source before with parse_sec.patch ldap_start_tls.patch Makefile.in.patch srv_spoolss_nt.patch addform.diff Containes the samba-2.2.5-printing.patch only parts of the above patches? tom