similar to: lpresume vs queueresume

Here is my printer config: printing = lprng load printers = yes use client driver = yes printer admin = @edutec, root printcap name = /etc/printcap print command = lpr -U%U@%M -r -P%p -J'%J' %s lpq command = lpq -P%p lprm command = lprm -U%U@%M -P%p %j lppause command = /usr/sbin/lpc -U%U@%M hold %p %j lpresume command =/usr/sbin/lpc -U%U@%M release

All, I have the following in my smb.comf for printing commands... # NOTE: If you have a BSD-style print system there is no need to # specifically define each individual printer [printers] comment = All Printers path = /var/spool/samba browseable = no print ok = yes print command = /usr/bin/lpr -P%p -r %s lpq command = /usr/bin/lpq -P%p lprm command = /usr/bin/lprm -P%p %j

OK, then here's the weird part. I have another server, hosting other files, lets my Windows 10 system connect. The main server won't though. They are both running Debian Jessie 8.3, and Samba 4.1.17-debian. Below is the /etc/samba/smb.conf file *that works with Windows 7 and 10*: [global] workgroup = SD57 netbios name = SAMBA server string = sss interfaces

Hi all, After some config changes and reboots, I got the Samba server running properly for my client computers running Windows 7. My issue now is with Windows 10. I see threads relating to setting "max protocol = NT1", but this seems to break the Windows 7 clients (which are finally working again). Below is my smb.conf file (which works for Windows 7): [global] workgroup = JMC

First of all, thanks to everyone who has helped me out so far resolving my samba problems! The latest has to do with LPRng and directory permissions. LPRng requires 0600 permissions on the spool directory, owner daemon group daemon. Whenever a user tries to print through SAMBA, they do not have write access to the spool directory, as teh job comes in user/group of the person who printed. Any

Using samba 3.05 and the point and print features how does one setup tcp/ip ports for printing. After having loaded the print drivers using the APW all the printer ports show a local port on the samba server and all of my printers use a 192.168.10.X address. Is there anyway this can automatically happen without user intervention. I wasn't able to locate this info in the how to's.

We have been using CUPS to handle printing and have run into some "features" some of which a fresh install of the responsible server will probably fix. However there are some disparities between the documentation and our practical experience for which a clear statement would help others. The docs state when using CUPS the relevent lines of SMB.CONF should look like this: printing=cups

Hi, i have a small problem, i use CUPS - Raw printing, which works perfectly .. i thought.. When i , as Administrator ( or domain Admins ) print and want 5 copies there will be 5 copies. But when i do this as a Domain User, i get only 1 copy. Where am i missing something. Here's my printer config. ## PRINTING Section 1 !! Global Settings !! printing = cups load

Hi, I just installed 2 Win2K sp4 workstations on an otherwise working Samba 2.2.8a network and 2 of the 3 printers are showing "Access denied". What's up with that? The other computers that are working just fine are Win98, XP and Win2K NOT sp4. Here is part of the global section: printing = bsd load printers = yes disable spoolss = yes printcap name

I use to have a working custom "print command =" in my smb.conf until an upgrade to 3.0.28. OS: Suse 10.2 Samba: 3.0.28 Cups: 1.2.7 relevant smb.conf snippet [global] lpq command = lpstat -o%p ldap ssl = no name resolve order = host lmhosts bcast idmap gid = 15000-20000 include = /etc/samba/dhcp.conf logon drive = P: map to guest

Hi again, I changed from 3.4.5 to 3.3.10 after an AD upgrade to 2008R2 and prinitng is working mor ore less but it is incredibly sloooow. My server has no remarkable load so it is not due to hardware bottlenecks. Are there any ways to 'tune' 3.3.10 or any tricks to make it faster ? cheers ~christoph -- /* Christoph Beyer | Office: Building 2b / 23 *\ * DESY

I'm currently having a problem with the new released Samba 2.2.5: I cannot print anymore on my shared printer. What is strange is that It worked fine with samba 2.2.4, but now I got an access denied whenever I try to access the printer... /var/spool/lpd/samba is chmod 777 and the username is in the group lp Here is part of my smb.conf: [global] workgroup = HOME netbios name =

Hi, We've been stuck with this problem for a while now and we believe I tried enough potential solutions to justify my posting here. We're using samba 3.0.14a in Sarge in order to allow printing from Windows workstations (The authentication works with AD+Kerberos+Winbind) to a set of shared printers. Printing works perfectly but we would like to allow users to have control over the jobs

I have configured Samba on both a RH Linux 7.2 box and Solaris 8 box and am not able to remove print jobs. The lprm command is not getting called. I know that for a fact because I changed lprm command to equal a script which will log when it is called. And that script is never called. There are no errors in any log files - system or samba. The printing parts of the smb.conf file are:

On 02/04/16 20:02, Luke Barone wrote: > Also, when I run testparm -svv | less I can find these four lines on > both the working and non-working servers: > > server max protocol = SMB3 > server min protocol = LANMAN1 > client max protocol = NT1 > client min protocol = CORE > > > On Sat, Apr 2, 2016 at 11:57 AM, Luke Barone

I'm working on trying to get Samba 3.0.23c to work with Vista and I've run into a snag. If a share is set up for security = share, and protected with a password, when I try to mount the share using Start->Run->\\server\share, the password is rejected by Samba for about the first 10 seconds, but after that, it lets me in. I've tried all the common suggestions such as changing

Hi, I'm running samba 2.2.1a (RPM install) on RedHat 7.2 I've connected a Canon LBP-8 IV laserprinter to the network via a HP Jetdirect box. I've configured the printer within linux and printing goes fine. Now I'm trying to access the printer via samba from my win2k clients. Now, the problem is: When I'm trying to print to the printer (e.g. a testpage) I get the message

Hi. > [sample] > comment = "Free for all" > path = /storage/everyone > read only = No > create mask = 0777 > directory mask = 0777 > guest ok = Yes This worked right away - thanks! Still having trouble with the printers. I can browse the printers, but after running through the "Add printer" wizard the

Hi, I have the problem, that from a Windows 2000 System (possibly from others to), a user can use a printershare with the guest account and I don't know why. Following my smb.conf: Samba config file created using SWAT # from 192.168.2.20 (192.168.2.20) # Date: 2004/11/20 14:26:14 # Global parameters [global] unix charset = ISO_8859-15 display charset = ISO_8859-15 workgroup = WG interfaces

[Shane Drinkwater] Daniel, I have the same probelm. These are the steps I did in a previous thread... Jim, I think I found another bug... I really seem to be in printer hell :(.... I found that windows 2k doesn't update its status "ready" or "paused" when used with samba. Here is what I did... 1.) enable all of the lpr/lpd queues. check em' with lpq... 2.)