similar to: subnet browsing crappy solution!

I'm lookking for Samba for SCO Open Server Best regards,Abdullah Sekman _______________________________________________ Join Excite! - http://www.excite.com The most personalized portal on the Web!

https://bugs.freedesktop.org/show_bug.cgi?id=102722 Bug ID: 102722 Summary: [regression] changing resolution hangs the display on Lenovo Thinkpad p51 Product: xorg Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: critical Priority: medium

I cannot print across my subnets using microsoft win9networking. I have two subnets 192.168.0 & 192.168.1 of which the linux running samba server is the router using two ethernet cards . Workstations on both subnets share their printers from win95. Win95 machines from both sides of the subnet can telnet to both ethernet cards on the server and can also ping all machines across the two

Hi, I am still looking for the answer to my problem, i.e. windows not seeing the smb serbver in the networkneighbourhood. Here is my setup: Linux RH 7.1 Server / SMB 2.2.1a-4 (upgraded yesterday), IP Address 192.168.1.2 Firewall / Smoothwall: IP 1: 192.168.1.1 (DMZ side) IP 2: 192.168.0.1 (Internal Network) I opened UDP 137/138 and TCP 139 from DMZ to Internal (Internal to DMZ allows all)

I have setup a fileserver (172.0.0.74) in the dmz and I would like the internal network to be able to view it, (I also have a samba server on the LAN) so I enabled wins made the appropriate changes to my dhcpd.conf file. I cannot not see the server in my network neighborhood. Is there something I'm forgetting ? thx Mark -------------- next part -------------- HTML attachment scrubbed and

Hi all, on my debian box i configured chan_oss to work with /dev/audio device. CLI console command and Dial(CONSOLE/dsp) work perfectly but i notice 2 problems: 1. audio is very low in volume, even if i set 100 the mixer volume (via cmd line setmixer utility) 2. the sound is very crappy: the voice is "vibrant", words sounds like 'ttthhhiiisss iiisss aaa ttteeessstt". Seems

Hi, We had 2 asterisk 1.4 connected together in iax, all was fine. One of them was upgraded (server and Asterisk) in 1.6.2.15, the other end is in 1.4.38 When calling to 1.4 to 1.6.2 -remember, it's iax- all is good. But calling from 1.6.2 to 1.4 give a bad audio to calling party (words are cutted, you can't understand the words). On callee party it's still good. We replace

While burning in a new desktop Epox KT-880 workstation, I'm running on my old K6-III at 360MHz. Before new X updates (put everything in today, kernel, elfutils, ntpd - Selinux issues? - xorg, ...) with my PCI ATI 7000 (Radeon) on a 19" Samsung 950b @ 1024x768 (one of 5 different resolutions I commonly use), I could scroll smoothly at reasonable rates. With the new stuff I get severe

hi! I'm experiencing troubles with $(subj). What I actually had before is an NT box. Now it's been replaced by FreeBSD box with 2 network interfaces: ed0 has real ip address & ed1 has local ip 10.0.0.1. NT box is now assigned ip 10.0.0.2 & is connected to FreeBSD's ed1. After this change NT box doesn't see its workgroup. Workgroup has WINS server (functioning on

Hi - I've got two subnets that I need to "browse accross". I read the docs, but my situation is slightly different and I need a bit of help. Here's my setup: Network: 10.2.0.1/255.255.255.0 workgroup = EILIO interfaces = 10.2.0.1 bind interfaces only = yes security = user encrypt passwords = yes socket options = TCP_NODELAY

I have a problem browsing in my subnets let me explain me situation: I have a m0n0wall (FreeBSD based router software) with 3 nics. nic1:My WAN connection Nic2:My LAN connection (192.168.0.0/24 m0n0 is DHCP) Nic3:My Wifi connenciot (192.168.1.0/24 m0n0 is DHCP) just using ip-adresses acrossed the network is no problem. now i want to use windows browsing works on LAN but can't see the

We got a network with 6 sites, each with their own subnet. 5 sites uses Windows NT 4.0 server with all the bells and whistles. The last site uses Windows 95 and Windows NT workstation as clients, but only Samba based unix servers. Each site has its own domain/workgroup, and we got a working WINS setup. The five NT sites can browse the unix site, but the unix site can't browse the NT sites. I

We have two sites, one samba wins server and one w2k server (supplied for a particular task by someone else) The two sites are "foo" and "bar" We have two workgroups, "local" and "vendor" "Vendor" workgroup is at site "foo" All of our computers are in the "local" workgroup, and everyone at our two sites can see all the

I have a network with several sites, and all clients (mostly win9x) using one WINS server (Samba on RH Linux). The different sites have one or more workgroups each, and I want all workgroups to be visible and browsable for all clients. As far as I can make out, the clients at the various networks can only browse the workgroups which are either local or the one the WINS server is a member of. Not

Hello, I have been searching for answers now more then a week, but I cannot find a proper solution. Please help me with this: Scenario: Two differnet subnetted networks (1 and 2) connected by a cipe tunnel between two linux Samba boxes over the internet. On network one (1) is a Windows NT PDC installed which currently is the DMB for it's domain (1). On network two (2) one of the linux

Greetings, I recently upgraded my Samba server and am now running Debian sid's samba-2.999+3.0.alpha20-4. I have the following domain / workgroup / browsing options set in /etc/samba/smb.conf: interfaces = eth0 192.168.54.0/24 192.168.52.0/24 os level = 65 local master = yes domain master = yes domain logons = no preferred master = yes enhanced browsing = yes

I'm having some difficulties setting up browsing across networks and domains and was hoping some of you folks out there could help. We have two separate domains on two separate networks. I have a single WINS server. Why can I browse both networks from machine pw2 when I can NOT browse both from either ch2 or mtoal (my machine) or from streetsmary? (see details below). Does each network need

Hi, We have a server being hosted in a data center. We would like to use it as our PDC. I got the remote browse sync and announce figured out. But, if possible, we would prefer not have the domain/workgroup advertised on the subnet where the PDC reside and conversely not receive the browse list for workgroup hosted on the PDC subnet on our local net. Right now, I firewalled the subnet

Hi I have 2 Problems 1. I have a Samba server acting as a PDC on 2 subnet 192.168.0.xx and 192.168.88.xx, and 2 samba server as a stand alone file sharing server server. I used iptables to route the two network with the PDC as the router The PDC acts a DC and a WINS Server , I've set up the dhcp servers to give the wins address of the PDC, I can call machine in the 192.168.0.xx subnet by

I as sending this again in the hopes that someone will respond. Surely I am not the only one with this setup. Thanks, Misty ---------- Forwarded Message ---------- Subject: [Samba] Cross-subnet browsing and VPN Date: Monday 06 June 2005 09:54 am From: Misty Stanley-Jones <misty@borkholder.com> To: samba@lists.samba.org We have two subnets which both belong to the domain CORP, and