similar to: Can't browse network neighborhood after changing network address on server

Hi I seem to have a recurring problem with browsing the network. I set up a file server in my workshop. It is mostly installed using a apt-proxy i have installed here. When i first install i use DHCP. Before i take the computer on-site i change the ip address to what it will use when installed into the clients office. The logs show that it is a master browser on the right subnet. I can access

I keep getting the error 'Unable to find the Domain Master Browser' in my log,nmbd below is an extract from my error log; I've added: local master = yes , preferred master = yes to my smb.conf I used swat to create configuration file. Trying to conect in with an XP box, I've enabled MS networks, wins server -> 192.168.0.1, I've added my XP user/pass to the samba DB, open

Questions are about <1b> NetBios type record name for workgroup (for workgroup, not for node) . There is local subnet with Samba4 as DC (either Win NT or Win NT+) for mdom.net domain, and as following, there is mdom workgroup in neighborhood. But there are some other domain and/or non-domain workgroups in the subnet which Samba4 does not belong to. Is <1b> had to be registered by

We have the following Network: +------------Router-----------+ | | | | | | --Network (A)-- ---Network (B)--- 10.1.1.1/24 10.1.2.1/24 Workgroup=NET1 Workgroup=NET2 Win9x, PC (A)

Hi, Is it possible to browse the network neighborhood without sending netbios packets to the broadcast address? I would imagine it could be done by manually specifying a central wins server on the lan -- is that the case? Specifically my concern is that dialup users (without an access filter to restrict broadcasts) will flood the network with broadcasts, affecting latency sensitive applications.

At the moment if Samba4 acts as DC (domain controller) it doesn' t support neighborhood browsing, that is computers in a local group are not visible in network neighborhood. I have not been remaining think about working of the functionality. And have found this one: http://forge.univention.org/bugzilla/show_bug.cgi?id=30132 I am not a programmer but may be it will be useful for easier and

Let's see I've got a network about 10 PCs running XP and 1 running Linux. I had setup Samba and it was running like a charm. XP pcs could access linux box through network neighborhood and access 2 shared dir and edit/change files. Really not sure what has gone wrong. I am using Samba 2.2.8a I run both smbd and nmbd as daemons. When I run ps -aux they show up. root 1553 0.0

I'm running samba on a local linux server, with a bunch of shares. Over the last several years, this has worked perfectly in our heterogenous network of OS X and Windows. All my windows clients still work perfectly - my users can mount the samba shares and create, rename, move etc files and folders. However, recently (starting yesterday) my OS X clients are unable to rename any sub

Hello, I'm looking for help with the following setup. I have my own network of about 5 windows 95/98 computers and 1 linux box. with IP addresses 192.168.10.* The one running linux is actually set up as a router, with 2 ethernet cards The other network that it is connected to is the residence ethernet at my school, which is connected to the internet. >From behind the router, I can use all

I asked about this a few days ago, but none of the suggestions have made any difference... asking again in the hopes I'll find more things to try.... Linux: Ubuntu 9.10 Samba version: 3.4.0 OS X 10.6.2 I'm running samba on a local linux server, with a bunch of shares. Over the last several years, this has worked perfectly in our heterogenous network of OS X and Windows. All my windows

Daniel, I could kiss you :D I am using the default SSL certs in samba. I tried connecting to the new DC using it's FQDN instead of it's IP, and BAM, it connected just fine. Couldn't really tell you why, but as long as I can access it I'm happy! On Tue, Dec 12, 2017 at 11:20 AM, Daniel Carrasco <d.carrasco at i2tic.com> wrote: > Are you using the default ssl certs in

Hi samba folks, I'm running an NT$-style samba PDC and 2 BDCs. They are all on samba 3.6.25 (the SERNET packages on debian wheezy) I have a domain trust with another server on another subnet, I think they run samba 3.5, also NT4-style domain. Everything ran fine, they can login to our machines and vice versa, winbind can resolve their usernames etc. Now I upgraded the PDC to debian jessie,

Begin forwarded message: > From: Kimball Larsen <kimball at miridiatech.com> > Date: February 2, 2010 7:58:49 PM MST > To: Andy Liebman <andyliebman at aol.com> > Subject: Re: [Samba] OS X Clients Can't Create Sub-Directories > > > On Feb 2, 2010, at 6:53 PM, Andy Liebman wrote: > >> >> Kimball Larsen wrote: >>> I'm running

Hi there-- I'm using Debian testing ("Sarge") and recently upgraded to 3.0.0beta2-1 from 2.2. It broke, and I've been pulling my hair our trying to get it working again. I've gone to a Samba HowTo troubleshooting guide: http://hr.uoregon.edu/davidrl/samba/samba-diagnose.html and gotten successfully through test #4 (NetBIOS Name Resolution) but can't get anything on

Hello all! We recently upgraded from Samba 2.2.3 to Samba 2.999+3.0.alpha20-3 on debian 3.0. Ever since then users are unable to change their own passwords on their W2k machine. What happens is when they try to change it a process (passwd) gets stuck with the users name. The only way to fix this is to kill the passwd process the user started. I haven't changed the "passwd chat"

hey , I installed smbldap tools for have sync linux and win passwd, and it worked. But today i did some modifies to the script smbldap-passwd and it doesn't work. I check that win when try to change the password don't use it now...i try to reinstall again but still no working...this is my smb.conf someone can help me..? thanks [global] workgroup = IRONMAN netbios name = SHOGUN

Hi all. In the interest of using a more mainstream business distribution, I changed my faithful file/printserver over to Redhat 8.0 from Debian Testing. Now, my shared directories are working fine but printing is not working. I can browse to the printer using net view or Network Neighborhood in Windows or using smbclient -L in Linux but printing is not working. I've checked

Apologies, despite that error, the permissions now look good on the sysvol folder. Is there anything I need to do moving forward to keep my DCs idmap.ldbs in sync? or is this a one time thing? On Fri, Dec 15, 2017 at 1:16 PM, Taylor Hammerling <thammerling at tcsbasys.com > wrote: > ok, I followed the directions on that wikipage, made a hot backup, copied > the hot backup over to

We're running Samba 2.2.2 over an NT network. Our clients use Win95 (for the time being) and I wondered how we config Samba so they can map the shares using network neighborhood. We can map fine through MS-DOS, but when I try, for example, to map E drive to \\nfssrv\ads share via network neighborhood (where we ARE able to see the shares), it says E: is already connected to . Do you want

Are you using the default ssl certs in samba?. I had a similar issue, and after create my own certificate with all common names used on my domain (for example domain.com, dc1.domain.com and dc2.domain.com), I'm able to manage the dns using RSAT using that named. With ip address still failing. Greetings!! El 12 dic. 2017 6:13 p. m., "Taylor Hammerling via samba" < samba at