similar to: fixing a corrupt /dev/hdar .. debugfs assistance...

I used ddrescue to copy /dev/md1 to a disk of sufficient size, and re-ran e2fsck, and still get the error message that there's no root file system (I've tried most every superblock): # fsck -y -b 7962624 /dev/sdf fsck 1.36 (05-Feb-2005) e2fsck 1.36 (05-Feb-2005) Superblock has a bad ext3 journal (inode 8). Clear? yes *** ext3 journal has been deleted - filesystem is now ext2 only ***

Sorry, this is going to be a rather long post...Here's the situation; I have 4 IDE disks from an old snap server which fails to mount the raid array. We believe there is a controller error on the SNAP so we've put them in another box running CentOS 5 and can see the disks OK. hda thru hdd looks like this Disk /dev/hdd: 185.2 GB, 185283624960 bytes 255 heads, 63 sectors/track, 22526

Hi Rowland, Thank you for your answer. I think I have found a solution which could solve the issue until the next migration step. It tested it on another server which is not critital : * Joining the server as a member and setup the shares as you suggest * Use nss_ldap instead of nss_winbind (idmap) which will pick my unix ids In this setup it seems I can access to the shares

Hello, I'm looking for some help troublshooting why I can't access this share. Everything looks good to me, but smbd does not allow my account in.... Samba 3.0.4 on Debian > [2004/06/21 11:41:35, 2] smbd/service.c:make_connection_snum(311) > user 'LABOR\TIM' (from session setup) not permitted to access this share (ISO) > [2004/06/21 11:41:35, 3]

When attempting to mount the OCFS2 file system I'm getting the following error message: ocfs2_hb_ctl: Internal logic failure while starting heartbeat mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted" I followed the steps given in the users_guide: modprobe ocfs2_dlmfs mount -t configfs none /config mount -t ocfs2_dlmfs none /dlm o2cb_ctl

Rowland, Yes, I mean uidNumber and gidNumber. I'm aware I need to work with AD but at this time I need my unix IDs (on NSS) to keep services working. Not only for files ownership, but also for some other services. Yeah, that's complex... If I undestand well, the best way to do is to join the server using "net ads join" and use nss_winbind. This what I do but I only use the

The owner of my company just asked me for an Asterisk brochure. Has anyone seen such a creature? I know of some really informative websites, but I think a pdf would be priceless at this point. Thanks, Bob McDowell EMAIL PRIVELEGED & CONFIDENTIAL CLIENT COMMUNICATION    *** PRIVILEGED AND CONFIDENTIAL CLIENT COMMUNICATION *** This e-mail message and all attachments, if any, may

Hi, After mounting -t ext2 an ext3 partition, working with, do I have to recreate .journal when I remount the partition as ext3 ? Thanks ! Liu

Hello all. I was playing with tune2fs to see how large the .journal file should be on a 17G partition with 512M ram (it's 32M, by the way). I am using plain 2.4.7 with ext3-2.4-0.9.4-247, compiled with gcc-2.96-85 on a RH7.1 distribution with the relevant changes, i.e. e2fsprogs-1.22-1, mount-2.11g-4 and util-linux-2.11f-3 taken from rawhide. I don't have any ext3 statement in /etc/fstab,

Hi all, I've installed CentOS 4.4 in a box which previously had dual boot (XP SP2 and Ubuntu) I can run CentOS without problem but I can't boot XP SP2. When I try it the system simply hangs... [root at seth ~]# fdisk -l Disco /dev/hdb: 40.0 GB, 40020664320 bytes 255 cabezas, 63 sectores/pista, 4865 cilindros Unidades = cilindros de 16065 * 512 = 8225280 bytes Disposit. Boot Start

I decided to start using ext3. My kernel 2.4.15p9. I downloaded and build util-linux-2.11m and e2fsprogs 1.25. I compiled ext3 in the kernel. I started converting my filesystems and thing went ok for the first few. I then started getting the following on each additional filesystem. [root@joker /root]# tune2fs -j /dev/hdc4 tune2fs 1.25 (20-Sep-2001) Creating journal inode: done This filesystem

SSH doesn't seem to be responding to me. The machine I am connecting to is running Linux, and I could connect to it fine from windows running the SSH client. But now I can no longer connect. From Linux, this is the output: pc078:~$ ssh -v 208.240.199.51 SSH Version OpenSSH_2.2.0p1, protocol versions 1.5/2.0. Compiled with SSL (0x0090600f). debug: Reading configuration data

Hi, "Mircea Popescu" <nufarul.alb at go.ro> schrieb am 29.01.02: > I have this problem: > I've partitioned my hard drive with PQMagic 7 in the following way: > hda1 - fat32 > hda2 - ext2 > hda3 - fat16 > hda4 - extended > hda5 - Linux Swap > hda6 - fat32 > hda7 - ext2 > hda8 - fat32 > > I've put syslinux on

I want to write a validate routine to check to enforce that a position must be unique in a category. (In another category, it doesn''t have to and shouldn''t need to be unique.) I write this code which works happily for new items: def position_in_category_not_unique @items = Item.find( :all, :conditions => [ "category_id = ? AND position = ?", category_id,

Hello, I have an E100P, and in the zaptel.conf I have: span=1,1,0,ccs,hdb4,crc4,yellow fxsks=1-10 the light on the card is green( BTW what do all those states of the card that zttool reports YELLO, RED, BLUE ..., is there a doc for zttool?, or for the card?) in the asterisks` zapata.conf I have: [channels] context=default switchtype=euroisdn signalling=fxs_ks usecallerid=yes hidecallerid=no

To test CentOS 5, I loaded from DVD adding it to a system at home running Fedora Core 7 T2. Partition Layout is: /dev/hda1 - / for the RH7T2 system /dev/hda2 - /home /dev/hda3 - swap /dev/hda4 - extended /dev/hda5 - / for CentOS 5 The system loaded cleanly and gave me the opportunity to tell grub about the other system. CentOS boots fine. Grub Stage 2 will show me both systems.

It would be very nice to be able to rsync the raw data content of, e.g., a non-mounted disk partition, particularly in combination with --inplace. Our reality: several dual-boot machines running Windows during the day and Linux at night, during backups. Windows is very tedious and iffy to re-reinstall without a raw disk image to start from. Disks fail, and the ensuing downtime must be

Hello, sorry if the question was asked a couple of times before but I couldn't find any useful hinds to this problem using google and the listman search-engine of the archive of this list. Somehow the ext3 filesystem on one of my machines died an after a reboot grub wouldn't come up again. What I did so far: fsck -y /dev/hda4 fsck 1.35 (28-Feb-2004) e2fsck 1.35 (28-Feb-2004)

> My HDD got /dev/hda1 which is DOS6.22+w3.11 > hda2 which is w95B > hda3 which is linux native > hda4 which is linux swap > > How sd I enter the win references in my config file in order to be able > to run both w311 and w95 programs ? > > One out of the difficulties is that with the last LILO, You can start > whether w311 whether w95 without having to change

Do you want to get in... ...and got what it takes? I''m working as it-responsible (diplomatic service) for the Republic of Cyprus. Now I want to move on, I know that I have the next big thing in the dot com biz. It all begun from a dream that became a businessplan and also later on was nominated by UN World Summit Awards and won the title as best initiative in category ICT. In a few