similar to: Re: ext3 badness in 2.6.0-test2

Hi I have a Raid 1 centos 4.4 setup and now have this /proc/mdstat output: [root at server admin]# cat /proc/mdstat Personalities : [raid1] md2 : active raid1 hdc2[1] hda2[0] 1052160 blocks [2/2] [UU] md1 : active raid1 hda3[0] 77023552 blocks [2/1] [U_] md0 : active raid1 hdc1[1] hda1[0] 104320 blocks [2/2] [UU] What happens with md1 ? My dmesg output is: [root at

So I'm trying to RAID-1 this system which has two identical disks installed in it, and it isn't working for some reason. I started by doing a CentOS-4 install on /dev/sda1 as root, and with /dev/sda2 as my swap. I finish the install, yum update, and then I want to make the mirrors. I copy the partition table from one disk to the other: # sfdisk -d /dev/sda | sfdisk /dev/sdb I create

Hi there I have a little problem to get my include / exclude working: I want to sync /etc /home and /usr/local (and all files/dirs beneath) to REMOTEHOST:/dest There are some huge files in /home which I want to exclued I have set up an include/exclude file but I still get too much files. Also the excluded file is synced /usr/bin/rsync -av --exclude-from=excl --delete --numeric-ids --relative

I am stuck on a simple problem where an example works fine but the real one does not. I have a data.frame where I wish to sum up some values across the rows and create a new data.frame with some of old data.frame variables and the new summed variable. It works fine in my simple example but I am doing something wrong in the real world. In the real world I am loading a labeled data.frame. The

Hi all, After rebooting my CentOS 5.5 server, i have the following message: ================================== Red Hat nash version 5.1.19.6 starting EXT3-fs: unable to read superblock mount: error mounting /dev/root on /sysroot as ext3: invalid argument setuproot: moving /root failed: No such file or directory setuproot: error mounting /proc: No such file or directory setuproot: error mounting

I have a machine on CentOS 5 with two disks in RAID1 using Linux software RAID. /dev/md0 is a small boot partition, /dev/md1 spans the rest of the disk(s). /dev/md1 is managed by LVM and holds the system partition and several other partitions. I had to take out disk sda from the RAID and low level format it with the tool provided by Samsung. Now I put it back and want to reassemble the array.

Hello, Sorry for the off-topic, but I've just installed CentOS 5 on my home box and I want to put the journal on another drive. I created a software RAID-1 device, /dev/md1, and formatted an ext3 file system on it. Now I want to move the journal to /dev/hda5. I've googled for this and the process appears to be: mkfs.ext3 -b 4096 -O journal_dev /dev/hda5 mkfs.ext3 -b 4096 -J

Hi list, I'm new with UEFI and GPT. For several years I've used MBR partition table. I've installed my system on software raid1 (mdadm) using md0(sda1,sdb1) for swap, md1(sda2, sdb2) for /, md2 (sda3,sdb3) for /home. From several how-to concerning raid1 installation, I must put each partition on a different md devices. I've asked times ago if it's more correct create the

On Tue, 2015-03-17 at 23:28 +0100, johan.vermeulen7 at telenet.be wrote: > > on a Centos5 system installed with software raid I'm getting: > > raid1: raid set md127 active with 2 out of 2 mirrors > > md:.... autorun DONE > > md: Autodetecting RAID arrays > > md: autorun..... > > md : autorun DONE > > trying to resume form /dev/md1 Hi

Hello, I have two disks sda and sdb. One of the was broken so I have changed the broken disk with a working one. I started the server in rescue mode, and created the partional table, and added all the partitions to the software raid. *I have added the partitions to the RAID, and reboot.* # mdadm /dev/md0 --add /dev/sdb1 # mdadm /dev/md1 --add /dev/sdb2 # mdadm /dev/md2 --add /dev/sdb3 # mdadm

Is there a reason why after a software raid install (from kickstart) that md1 is always unclean. md0 seems fine. boot screen says md1 is dirty and cat /proc/mdstat show md1 as being rebuilt. Any ideas? Jerry --------------- my kickstart -------------- echo "bootloader --location=mbr --driveorder=$HD1SHORT --append=\"rhgb quiet\" " >

> Hi. > > CENTOS 7.6.1810, fresh install - use this as a base to create/upgrade > new/old machines. > > I was trying to setup two disks as a RAID1 array, using these lines > > mdadm --create --verbose /dev/md0 --level=0 --raid-devices=2 /dev/sdb1 > /dev/sdc1 > mdadm --create --verbose /dev/md1 --level=0 --raid-devices=2 /dev/sdb2 > /dev/sdc2 > mdadm

Thanks for all the responses. A little more digging revealed: md0 is made up of two 250G disks on which the OS and a very large /var partions resides for a number of virtual machines. md1 is made up of two 2T disks on which /home resides. Challenge is that disk 0 of md0 is the problem and it has a 524M /boot partition outside of the raid partition. My plan is to back up /home (md1) and at a

Hi, I''m trying to run btrfs-convert on a system that has three raid partitions (boot/md1, swap/md2 and root/md3). When I boot a rescue system from md1, and try to run "btrfs-convert /dev/md3", it complains that /dev/md3 is already mounted, although it definitely is not. The only partition mounted is /dev/md1 because of the rescue system. When I replicate the setup in a

I think I have solved my issue and would like some input from anyone who has done this for pitfalls, errors, or if I am just wrong. Centos 5.x, software raid, 250gb drives. 2 drives in mirror, one spare. All same size. 2 devices in the mirror, one boot (about 100MB), one that fills the rest of disk and contains LVM partitions. I was thinking of taking out the spare and adding a 500gb drive. I

I am running a series of candidate mixed models using lmer (package lme4) and I'd like to be able to compile a list of the AIC scores for those models so that I can quickly summarize and rank the models by AIC. When I do logistic regression, I can easily generate this kind of list by creating the model objects using glm, and doing: > md <- c("md1.lr", "md2.lr",

Hi all. I have a Dell SC440 running Centos 4.4. It has two 500GB disks in a RAID1 array using linux software raid (md1 is / and md0 is /boot). Recently the root file system was remounted read-only for some reason. The logs don't show anything unusual, presumably the file system was read-only before anythng was logged. Running dmesg showed this error repeated many times: EXT3-fs error (device

I have noticed that when I do software raid installed (RAID1) that I reboot and one of the first things it says is md1 is not in sync doing background reconstruction... md0 is my /root partition md1 is my /home partition why would md1 not be in sync after an install. Jerry

Dear R community members I have been struggling on this simple question, but never get appropriate solution. So please help. # my data, though I have a large number of variables var1 <- rnorm(500, 10,4) var2 <- rnorm(500, 20, 8) var3 <- rnorm(500, 30, 18) var4 <- rnorm(500, 40, 20) datafr1 <- data.frame(var1, var2, var3, var4) # my unsuccessful codes nvar <- ncol(datafr1)

Everyone, We just had a pretty bad crash on one of production boxes and the ext2 filesystem on the data partition of our box had some major filesystem corruption. Needless to say, I am now looking into converting the filesystem to ext3 and I have some questions regarding ext3 and Linux software RAID. I have read that previously there were some issues running ext3 on a software raid device