similar to: force Samba bind to internal IP only

Hello, I''ve finally managed to setup a firewall with freeswan 2.04 using the kernel crypto api (backported from kernel 2.6). (Almost) everything seems to work fine if I disable shorewall, but packets are filtered whe shorewall is active. I''ve already read a past thread on the subject and I followed all the hints and it actually partially works: my lan I can access the remote

I''ve installed a bering box acting as a firewall for a lan; the lan is 192.168.1.0/24 the bering box is 192.168.1.254 I''ve installed a squid server 192.168.1.1 It is possible to configure shorewall for a transparent proxy to the squid server? I''ve tryed with REDIRECT loc loc:192.168.1.1:3128 tcp www - !192.168.1.1 in the rules file I get this error: Error:

Hi, I run a small system with an older version of shorewall (1.4.2). It has been extremely solid for a long time. But recently I have noticed the connection table filling up, which has never happened before. My guess is that the box is getting hit with floods. The system only has 64M of ram and the conntrack_max is set to 4096 based on the ram. I have temporarily increased it to 8192 so that it

I am having a problem with connections from a server behind a shorewall firewall. Both machines are running redhat 8.0 with a custom 2.4.20 kernel. The problem lies with a mail server I am configuring which has been able to send mail to all hosts, except this one. The connection starts with the SYN_SENT, and then just hangs there. (telnet to remote server on port 25 just hangs trying to

I have the need to know how many connection the server has, i run this command but i don't know how to sum all the results and get a final number. any ideas? netstat -an | grep -E 'tcp|udp' | awk '{print $6}' | sort | uniq -c | sort -n ?? 1 CLOSE_WAIT ?? 1 FIN_WAIT_2 ?? 1 LAST_ACK ?? 1 TIME_WAIT ?? 4 SYN_SENT ? 15 ? 37 LISTEN ? 44 ESTABLISHED

Hi, Is it possible to mount the complete SMB tree (Network Neighborhood in MS Windows) to /smb for example? I currently only know how to mount individual shares. Thanks in advance, Z

I have not gotten a reply to my last post about not being able to access samba shares, so I would like to start from scratch. I am new to samba and I would like to start with a simple smb.conf that would guarantee access to a share by anyone, then start adding security measures until I have a secure working config. Does anyone have a smb.conf file they could send me that would get me started? --

I am trying to set up a smb.conf file so that a user and password are NOT required to access the share. Can someone tell me how to do this? net use p: \\sambaserver\public asks for a password, then returns (regardless of the password or user): "The account is not authorized to login form this station. Thanks, . -Ralph Ralph Burnette x3313 7

I've just set up samba for a small LAN. I'm running samba 2.2.7 on RH 8. Now I have a real problem that I have no clue on. I have VERY intermittent connectivity to the Samba server. If I left a computer (Windows 98) idle for a while, and then try to browse the contents in the Samba server, I will get this error " domain is unavailable" or "The specified network name is no

Hi Rowland, On 18/07/19 15:52, Rowland penny via samba wrote: > my plan would be to: > > TURN OFF DC2 I did it on Friday afternoon after my numerous attempts to demote DC2 failed. This fixed one issue - made the network shares appear again across all clients. A new one has been discovered though on one of our CentOS 5.11 boxes. Any command (like sudo or ssh) that needs authentication

Hello. I apologize in advance for my question -- it's seemingly trivial, but I've spent countless hours on its solution to no avail. Basically, I have two tinc servers: Home: Ethernet adapter LAN: IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 Ethernet adapter

I'm configuring Samba on a Red Hat Linux 7.2 server, for access from a Windows 2000 client. My server name is DEMENTIA, and it's IP address is 192.168.0.5. I've confirmed with ifconfig that the server's broadcast address is 192.168.0.255. I'm having a problem with NMB that I seem to have isolated to the following symptoms - After starting NMBD, I can lookup the server name

Hi, I have a simple question. I have my firewall with 2 external Ip and 1 lan. For example ISP1 FW LAN----Mail Server ISP2 Ok, when i DANT the smpt port to my mail server, I can see that the conection in my mail server comes from the external IP of my ISP. I need to change this so the conection to my mail server cames from the LAN IP from my firewall Is this possible?

On 18/07/19 13:19, Rowland penny via samba wrote: > OK, from my understanding DC1 is using the internal dns and DC2 is > using Bind9. It's the other way round. On dc1 port 53 is mapped to /usr/sbin/named -u bind. On dc2 it's /usr/sbin/samba. I wasn't sure what to do when I deployed dc2. I remember installing bind9 on dc2 but then purging it. BTW - does it matter for

Unreplied message when i try to connect to an internal system I''ve set up a shorewall 3.0.5 system on Fedora core 4 When i want to connect from an external computer to one in my network it does not reply. I connect from 212.19.195.160 to 212.178.64.74 trough port 8080 The rule i made is: DNAT  net   loc:192.168.0.20:80  tcp  8080 - 212.178.64.74 (and 192.168.0.20 can be reached

Hi, I have spent a fair amount of time trying to solve this problem and tried things like disabling checksums etc. The problem is like this: 1. I boot my dom0 without xend running and I can resolve and ping google. 2. I start xend (without and domU domains up) and after a while I can no longer resolve domain names, but I can ping the public IP addresses. 3. I start up a domU (xm create -c xyz)

https://bugzilla.netfilter.org/bugzilla/show_bug.cgi?id=453 Summary: REDIRECT broken in 2.6.16-rcX kernels Product: netfilter/iptables Version: linux-2.6.x Platform: i386 OS/Version: Debian GNU/Linux Status: NEW Severity: normal Priority: P2 Component: NAT AssignedTo: laforge@netfilter.org

On Tue, 7 Apr 2015, Laszlo Ersek wrote: > Whereas syslinux.efi apparently uses the embedded gpxe/ tree, and that > one uses TCP timestamps. See tcp_xmit() in gpxe/src/net/tcp.c: Actually syslinux.efi seems to be using the implementation calling into UEFI via these functions: http://git.kernel.org/cgit/boot/syslinux/syslinux.git/tree/efi/tcp.c I've tried to add debug messages to these

Hi, I have a fc14 box with two interfaces that I'm having some difficulty setting up a bridge properly. I have a few kvm guests set up and running, but I've switched from using NetworkManager to using standard networking with a bridge. I've modified the ifcfg-eth0 and created ifcfg-br0 as per the standard documentation, but I think I'm having routing problems. This is what the

Hello list, I am at the hair pulling stage of this game right now. Having read through many of the posts, I still seem to be unable to get my samba server to allow anonymous connections ( or any connections for that matter ) from windows machines. All I want to do is have printers and one folder shared, all as guest accessable. I have made the security level = share and made the shares