similar to: smbprint & .config

Hello people, ok just a small problem I have with my samba settings. I have a RH 6.0 file/printer server that is connected to some Windoze 98 machines and a couple of Macs. The linux machine also has one printer on its local port lpt1. Ok...I have set up everything and currently I can print from the Windozes and the Mac to the printer that is localy connected on the Linux server. What I want

Hi, Maybe someone can help me. I am running FreeBSD 3.2 with Samba 2.0.4b and NT Server 4.0 with SP3 and I added the BSD machine to its server list. My printer is setup on my NT for print sharing. Well if I connect to the share name of the printer via smbclient ( ./smbclient \\\\ESAU\\EPSON -U login%password) I am able to successfully access it and even print. However, when I use the

Dear Samba Team, the smbprint script as provided with Suse7.2 for Samba Version 2.2.0 did not work. The problem was that the file to be printed was not transfered via stdin after the print - command. I changed the smbprint script to pass the commands via the -c option. My changes and comments are marked with MR27092001MR in the smbprint attached. I did not find this in the lists, so I hope this

I am trying to allow printing from my linux box to my win98 box, to which my epson stylus printer is attached. It's just not happening...something tells me I'm flirting with a world of pain. I *can* print a file by going: smbclient //rory/EPSON translate print /etc/group but I cannot print from applications, nor can i use smbprint. I tried going: cat /etc/passwd | sh -x smbprint

Hi there Looking at the archives I didn't find a solution to the following problem we have here: Printing from our linux-server (wagner) to an intel printserver (PS652D8F) doesn't work. Here's the stuff we know/tried: wagner:~ # smbclient -L //PS652D8F -N added interface ip=10.0.0.10 bcast=10.0.0.255 nmask=255.255.255.0 Got a positive name query response from 10.0.0.40 ( 10.0.0.40

While trying to configure my *nix box to print to windows, I discovered my samba build does not have the smbprint utility. I saw no option in the configure/make script to build with the smprint utility. Is there an option that will build this tool? Thanks! Joe Cipale -- #----------------------------------------------------------# # "Don't fear the penguin!"

Hello, Samba team! I am very new to Linux and Samba, so probably my problem is that I need to study more Linux basic concepts, but in the meanwhile, I need to get this working: I have to print from a Linux Suse 7.2 box, where I have installed Samba, to a printer connected to an NT box. I have found things written for printing the other way around, but not too much this way. I defined a printer

I've connected a BSD machine to a WinME machine in the office to begin experimenting with samba. I've been messing about with it but I can't get a print of samba files to the WinME printer. My /var/spool/lpd/canon directory contains .config, .seq, status and lock files and a whole bunch of files that aren't getting printed to the remote printer. my .config file has: server=ICE1

----- Original Message ----- From: zefiro To: samba@lists.samba.org Sent: Tuesday, September 03, 2002 5:50 PM Subject: printcap file Suse Ver. 7.3 profesional Samba Ver. 2.2.1a Windows PC printer Setting smbprint_LS filter in the /etc/printcap file, to print on a printer connected to Windows PC (which is ok on other Linux Slackware and RADHAT versions), no sistem error is generated but

HI all, Question: I have a freeBSD box using smbprint to print on a HP jet direct printer attatched to a NT server. However the formatting is horrible and it only prints out about the first 2 lines of a file. Any suggesstions out there? thanks! -aaz

Dear users Thanks for reading this. Hope you will help me. I am using samba 1.9.17p2 on SunSparc-20 running solaris2.5.1 for printing and file sharing with PC-network. File sharing is working fine but I want to print to a WfWg printer from Solaris. So I have used your script smbprint.sysv and try to print. But I am facing following problems: 1-

I've just set up lpd to print to a postscript printer attached to an NT server, using the Redhat 5.2 version of the smbprint command. Eventually I'd like this machine to be the department's standard lpr->SMB gateway. It works perfectly, except that since smbclient always logs onto the NT server with the same ID, no matter who prints the job, the same NT-generated banner page gets

I need some help with getting this NT printer setup with Samba server. I think I have modified all the required files and don't know what else is missing. An outside observation should find the missing link. Here is my /etc/printcap: lp:\ :cm=NT printer :\ :sd=/var/spool/lpd/lp:\ :af=/var/spool/lpd/acct:\ :mx#0:\ :if=/usr/local/samba/bin/smbprint:\

Okay... seems I still cannot get anything working right with this as far getting it to print. Here is the three different files which I would like all to look at and see what I have screwed up since it refuses to print. Here is the setup of the network: HP 5L connected to Win95 - 192.168.0.1 Linux - Zeus - 192.168.0.3 -----------SMB.CONF FILE------------ ; /etc/smb.conf [global] printing =

Hi, i would like to configure a computer (Linux/SuSE 6.3 i386 connected to a local lan, clients with Win9x) to do the following: whenever an user print a document on a shared printer the document will be printed twice: - once in a printer connected to Linux (through lpr or smbprint?) - once to another shared printer Is this possible? Are there any related documents? Thanks in advance, Mat

Hello! I?ve got trouble to print via Samba. But read to the end to understand: My printer (a Canon BJC 620) is connected to a Win98 box. Its network name is canon. The /etc/printcap entry is: ---/etc/printcap--- lp|smb|canon:\ :cm=unser Drucker:\ :sd=/var/spool/lpd/smb:\ :af=/var/spool/lpd/smb/acct:\ :if=/usr/local/samba/bin/smbprint:\ :mx=0:\

I am having a bit of a problem getting my Samba printer configuration to work with Windows XP(I am running samba on Linux Redhat 7.3). My other shares seem to work as I can find my files on the my Linux system using XP. I have used redhat 7.3 kde printer configurations to create the appropriate files. The result is when I try to send a print job the printer kicks into to gear but only a blank

Dear Sir/Madam, I've downloaded the samba 2.2.2 for solaris, and use pkgadd install it, but I can't find smbprint or smbprint.sysv script in this package. could you help me? thanks and regards, David -------------- next part -------------- HTML attachment scrubbed and removed

Hello there, I've produced a modified version of the smbprint script that comes with the samba source. The script is aimed to retry sending the print job if the windows machine is switched off at the time of printing (samba seems to just drop the print job after a period of time if the machine is off). This script will mail you to tell you the machine isn't turned on yet and if you

I work in a lab were the only "printer" we have is an HP 3100 (printer/fax/scanner) item. This printer is hung off a Windows98 box and I want to be able to print to it from my linux box using smbprint. I can connect to the share that represents this printer: smbclient \\\\server\\printer "" -N and I get the SMB> prompt which (I think) is pretty useless for printers.