similar to: How to determine the size of a existing journal file

Is there any way to query the size of an existing journal? I have heard a number of sizes thrown around as defaults, but I need to be able to reliably get the exact journal size. Thanks Jason -- ---------------------------------------------------- Storix Software info@storix.com (sales) 1-619-702-6500 support@storix.com (support) 1-877-STORIX-1 (US) http://www.storix.com

I have been playing with external journals some more and thought I should share some experiences. I am running 2.4.16 with the ext3 patches from Andrew Morton and e2fsprogs 1.25 I have an ext3fs filesystem on an 8 drive RAID5 array and place the journal on a partition of the mirrored pair that I boot off (all drives SCSI). I have tried pulling the power cable and seeing what happens. I finally

Hello, I have 2 boxes with 1.5TB storage with ext3 fs, and the kernel is 2.6.11.8. I'm using E2fsprogs 1.37 for FS creation. And, Filesystem revision #: 1 (dynamic) There are 2 scenarios: 1. All SATA drives, RAID5 2. All PATA drives, RAID5 and wrapped in log volumes. I'm having lots of issues with fsck. I did search, but somehow not getting the right information. needs_recovery

Something bad must have happened when I first ran e2fstune on my root file system. Now I cannot mount it ext3 and when I try to run tune2fs -j on it, I get this error message: permission denied while trying to create journal file There is a .journal file in /: [root@monster log]# ls -l /.journal -rw------- 1 root root 33554432 Sep 29 10:21 /.journal But dumpe2fs

Hello everybody, I am new to this list, so welcome everybody. Last 2 week I had two harddisk crashes with my ext2 file system. This is what sort of happed with both of the disk: I pluged in my USB to SATA converter in my harddisk that has an ext2 filesystem. I mounted the partition, went to a directory that had a DVD image. I mounted the dvd image in the same directory and started watching the

Hey all, Had a power failure and subsequent ext3 disk corruptions. Attempting to fix, but not working. Its a 120 gig IDE disk, 3 partitions. /boot, /, and swap. Basically can't boot up since the box can't get to the system files in /usr/ or anything. So I'm booting off of a FC2 disk 1 in recovery mode and trying to fix the filesystem with e2fsck The boot partition cleaned up

Hello everybody, first of all thank you the development of Ext2/3/4. It works like a charm and makes it possible to base applications on it. However, now I have the first time where I need more information to understand the behaviour of a ext4 installation on a 480 GB harddisk. It holds a database with a size of 355 GB, as said by "du -m": ... 355263 /opt/ssd However,

Hi, hoping that someone on this list can help me here is the Problem. After a crash it seems the journal could not be recovered. This is what mount gives: root@wuehlkiste:# mount -t ext3 /dev/hdb2 /mnt mount: wrong fs type, bad option, bad superblock on /dev/hdb2, or too many mounted file systems and this is the corresponding logfile-entry: Nov 27 11:16:13 wuehlkiste kernel: attempt to

Hi! Is there a way to view ext3 filesystem's maintained journal (in a human-readable-format)? I ask, because i have had a server crash before and now i'm wondering if i might take a look at last things that my server did straight before crash. I guess clarifying log insertions might be lost before buffers were flushed to disk. Thx.

On a customer's machine running SuSE 9.2, the size of the occupied space on the harddisk is reported incorrectly by "df -h". After we noticed the problem, I rebooted the machine and had it checked by "e2fsck" (check forced with "tune2fs -C 40", we are not on location). Right after the reboot I proceeded as follows, but I could not find any information about

I am using RedHat 7.2 w/ kernel 2.4.7-10. My / filesystem is configured as ext3. I want to change it to use data=journaled instead of ordered. If I mount it from a boot floppy, it mounts fine. (mount /dev/hda2 /mnt -t ext3 -o data=journal). I have attempted to find the correct procedure to start it up as journaled from grub to no avail. I have created a new initrd image that works fine with

Hello! I have some questions about external journals. On a 4 disk software RAID 5 I have two big devices (one 60 GB, one 180 GB). I would like to give each an external journal on a 2 disk software RAID 1 device and use data=journal. The journal will get its own partition with mke2fs -O journal_dev /dev/mdwhatever. The used 6 harddrives are all IDE drives, they are connected through

My UPS failed and my server took an 'unscheduled outage' a few weeks ago. The only casualty appears to be a volume I used for backup. I usually maintain data on multiple hard disks, but in this case I errantly had some data (of marginal value) on this file system. At this point, the data is not worth enough for me to send the drive out for data recovery, but it's worth enough to

Hi, I need to understand and to calculate the offset of the beginning of a file within my partition which uses an ext3 filesystem. Can I use dumpe2fs to figure that out, if yes how? Sincerely, William Tambe

Hello, Hope you will forgive me for asking some very simple question about e2fsprogs. I am very new to the kernel as well as file system programming. My task is to collect superblock, inode, bitmap ( or free list) information from ext2/ext3 filesysteam. After searching the google, I came to know about e2fsprogs, which I was able to install and use at least "dumpe2fs" utility. This

Hi! I'm new to the list. I have a problem with mounting my home directory since my PC crashed. I hope that I can get some help on this list as I don't know much of ext3 myself. The mount command for my /home gives me the following output: # mount /dev/sda6 /mnt/tmp/ mount: wrong fs type, bad option, bad superblock on /dev/sda6, missing codepage or other error In some cases useful info

Hi Ted and all, I have a couple of questions near the end of this message, but first I have to describe my problem in some detail. The power failure on Thursday did something evil to my ext3 file system (box running RH9+patches, ext3, /dev/md0, raid5 driver, 400GB f/s using 3x200GB IDE drives and one hot-spare). The f/s got corrupt badly and the symptoms are very similar to what Eddy described

Hello, yesterday I experienced following problem with my ext3 filesystem: - I had ext3 filesystem of the size of a few TB with journal. I correctly unmounted it and it was marked clean. - I then ran fsck.etx3 -f on it and it did not find any problem. - After increasing size of its LVM volume by 1.5 TB I resized the filesystem by resize2fs lvm_volume and it finished without problem. - But

I am reporting this on the advice of the Fedora Users Mailing List Member. This the mailing list exchange outlining the problem with specifying -S to mkfs, and it's subsequent consequences when fsck is run. I am reporting this per suggestions made to me on the Fedora Users Mailing List. The following is the mailing list exchange: On 09/18/2014 07:01 PM, Robert Nichols wrote: > On

I found a thread that has almost the exact same symptoms as me, but didn't seem to come to a resolution: https://listman.redhat.com/archives/ext3-users/2004-December/msg00018.html I have an LVM(2) array that I've just lvextend'd and want to resize2fs, but I can't get through the e2fsck. I get these errors when fsck-ing: Group 3125's inode table at 102400545 conflicts with