similar to: browse list sync with 2 samba servrs

Here is the packet trace - ICMP seems to be coming from my SAMBA Server - see frame 3 Does the netstat output look correct in my first request for help? Joel Morrow jiram@aol.com TRACE Frame 1 (92 on wire, 92 captured) Arrival Time: Dec 22, 2001 09:36:08.333676000 Time delta from previous packet: 1.999444000 seconds Time relative to first packet: 2.000088000 seconds Frame

I've had to set up an iptables filter to drop packets originating from ports 32944, 33169 and 33171 on a samba 3 server as broadcast 'storms' lasting ~3seconds have intermittently been taking down all net communication. Can anyone shed any light on this? The packet capured in ethereal is below. Lee Baker Sorry for not trimming - not sure what's important: No. Time

I am trying to resolve a problem with NetBIOS wildcard broadcast queries being relayed/repeated by around 50 US Robotics wireless access points. The APs only re-broadcast wildcard queries from our samba3 server - our numerous windows 2003 servers do not appear to use wildcard broadcast queries (if they do, they are not causing the same problems). Any help would be appreciate as this problem is

Good day time! We've noticed the following issue with Samba 3.0.1 on Linux. When SMB client asks for the first time on FID for a locking or read request on an opened file, it causes an ACK to be sent from client side. Windows server also requests ACK BUT much more rarely. Sending ACK causes additional overhead when working in heavy locking and unlocking environment. Windows server

Good day time! We've noticed the following issue with Samba 3.0.1 on Linux. When SMB client asks for the first time on FID for a locking or read request on an opened file, it causes an ACK to be sent from client side. Windows server also requests ACK BUT much more rarely. Sending ACK causes additional overhead when working in heavy locking and unlocking environment. Windows server

Hello, I replaced an NT4 server by a Samba 3.0.14a ldap server following the instructions in 'Samba by example'. Everything works fine except for some files on a W2003 SP2 server: - when the W2003 server uses the Linux PDC, from a WinXP client, some files are not writable, and ACLs can be listed but not changed. - when the NT4 server is up, the same files on the W2003 server can be

Hi, I hit the issue described in this thread https://groups.google.com/forum/#!topic/linux.samba/VfjW9Af92Wg while testing out s4u2self and s4u2proxy in a windows service, so I wanted to share my setup. So I wrote a small windows service that's running as a local system account to impersonate an user via s4u2self (using LsaLogonUser in win32 api than calling ImpersonateLoggedOnUser) and then

Hi all, I'm trying to get IAX2 trunking between two * boxes and am having extreme difficulty :) What happens is when the sending * server (the one initiating the call) receives the ACCEPT back from the receiving server it immediately replies with INVAL. I've checked the code and it seems to be not matching the accept packet with the relevant item in the iaxs array due to the following

I have the following situation: SIP Provider -> My asterisk -> SPA2102. Time to time I recieve a lot of warnings on asterisk CLI with RTP Read too short, after T.38 session established. It hapens only in one direction when fax trasmited from provider to SPA2102. I noticed, that asterisk did not pases one packet, that i include below. Asterisk reports warning , and drops that frame

Hello, I have just migrated an old OS/2 file server to a Linux box with Samba 3.0.23a. Now the OS/2 clients crash from time to time. I found a way to reproduce/force the crash using PMMail and did some experiments. The popuplog.os2 on the clients (Warp4 and eComStation) always names a sys3175 in pmshell.exe / doscall1.dll. Using Ethereal and comparing the network traffic between a) a client

My clients are Windows XP SP1 and SP2, members of a Samba-PDC NT domain (tested 3.0.7 and 3.0.10, same result). Attached is ethereal output of a two packet client-server exchange that takes place when an offline files sync is done. SP1 quickly does this exchange twice - first broadcast, then unicast (as attached) and goes on its way. SP2 tries, pauses many seconds, tries again, finally

Since Thursday evening my asterisk box has been failing to register with broadvoice. I haven't changed any of my config files in the last week. Can anyone suggest anything? Asterisk is reporting: *CLI> Aug 28 16:15:17 NOTICE[6150]: chan_sip.c:3914 sip_reg_timeout: Registration for '703XXXXXXX@147.135.8.129' timed out, trying again -- Got SIP response 404 "Not found"

I'm new to asterisk and need some help with getting a SIP connection working. I am trying to establish a termination point/DID number in another country. I am currently running Asterisk CVS-HEAD. My foreign provider uses SIP and authenticates via IP address. I am not required to register my SIP connection in order to send or receive calls. Can someone help me with how to understand the

Hello I'm using the ISC-dhcp 3.0pl1 + pxe patch (from http://savannah.gnu.org/download/pxe-toolkit/) and pxelinux as the loader program. It turns out that in my configuration pxelinux specific DHCP options are sent out by the server encapsulated within vendor extension option (option 43, RFC 1533). Currently pxelinux cannot parse this correctly (the full option 43 with it's contents is

Sambaserver is not accessible I have a problem connecting to SAMBA from Windows/ME systems (using samba--2.2.2 on Red hat Linux 7.1) What I would like to know is - What can I change to get this to work properly? SETUP I have a simple network - three Windows/ME systems and 1 Red Hat Linux 7.1 system all on the same subnet. There is a linksys router on the same subnet that provides WAN

I'm using Asterisk on a open server (no firewall or NAT) and trying to communicate with a Grandstream BudgeTone 102 SIP phone which is behind NAT. The BudgeTone is at firmware level 1.0.4.30 and Asterisk is from CVS about a week ago. My problem is that I'm only getting half-duplex communication -- I can hear voice from the Asterisk server but the server does not understand any voice from

On about 25% of inbound calls to a ring group, picking up any one extension as it rings results in dead air. Some details regarding my VoIP network to make the following logs more readable: 192.168.7.130 resolves to the trixbox host. 192.168.7.135 resolves to endpoint 812. 192.168.7.137 resolves to endpoint 811. 192.168.7.138 resolves to endpoint 810. 192.168.7.139 resolves to endpoint 813.

https://bugzilla.mindrot.org/show_bug.cgi?id=1964 Bug #: 1964 Summary: QoS/DSCP names false translated to ToS hex value Classification: Unclassified Product: Portable OpenSSH Version: 5.9p1 Platform: amd64 OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: ssh

Hi All... I?m trying to build a small demo using gWidgets which permits interactive scaling and selection among different things to plot. I can get the widgets for scaling to work just fine. I am using gcheckboxgroup to make the (possibly multiple) selections. However, I can?t seem to figure out how to properly define the gcheckboxgroup; I can draw the widget properly, I think my handler would

connect to it - wait about 2 minutes and then get 'network is busy' message. I suspect that my problems may lie somewhere in the multiple domains / subnetting areas, but I can't see where. Any comments will be welcome. TIA Harry Burgin Return-Path: <marion.haines@countygovt.brevard.fl.us> Delivered-To: samba@lists.samba.org Received: from gc2a-hplh4.countygovt.brevard.fl.us