similar to: Error: Network busy !!!

Hi! We are in process of setting up an audio guide that will cover notable places of our capital Riga, Latvia. The target audience are tourists that dials a free phone number from a mobile handset to listen to a 3 minute introduction to historic place. All audio, 10+ languages are recorder in studio at 44KHz. The audio is stored on server in A-law 8KHz because we'll be pushing it through E1

I had a similar problem at one stage, which it appeared was the result of my Linux system trying to resolve the clients name/ip address. I found this out by switching off DNS search (on my RedHat Linux systems it was in /etc/resolv.conf). Anyway, I also use 192.168.x.x address on my internal network, so I made sure my local DNS server was setup as the Primary DNS for the 168.192.in-addr.arpa

I'm not sure if this is an Asterisk thing, a handset thing or a telco thing, so please be gentle with me if this is not the right place to ask ..... When placing a call over a SIP channel to a mobile phone, if the phone is engaged, it does not return a BUSY status straightaway. Rather, I get a ringing-out tone for the timeout duration specified in the Dial() statement; *then* I get

> Hi Gareth Blades & Doug, > > Thanks so much for for the feedback. I have searched on lot of documents > but couldn't able to find clear answer regarding it. > > I hope you guys replies are very much help all in aterisk community. > > > Thanks & Regards, > > Vidura Senadeera, > > Network Engineer, > > Debug Solutions > > Sri Lanka .

Greetings, I have a File Server, Running Samba on RedHat 7.0 Everything Works fines, It have 64 megs of ram, and around 15 peoples using it. But sometimes, in the morning when people try to access it's Share it gives the error msgs: NETWORK IS BUSY. All my user get logon using a Windows NT PDC. To enable my user to connect to Samba, I "play" with the computer for a While..

Hi, I have defined several extensions. For some of them, the phone can be disconnected for a period of time (mobile users). When a call is initiated to that extension, if the user is not connected at that moment in time the caller see this as a busy extension. How can I detect from the extensions.conf file if a user is busy or it is not connected? I want to execute different applications in those

Hi When I call a phone with CAPI if the phone available I hear ringing ok but if the phone is busy I don't hear anything at all. Also, when I call a mobile phone and it is turned off I don't hear the operator voice answer me telling me that the request phone is turned off or unavailable. Any ideas? m

Send CentOS mailing list submissions to centos at centos.org -----Original Message----- From: CentOS <centos-bounces at centos.org> On Behalf Of centos-request at centos.org Sent: Tuesday, July 31, 2018 5:30 PM To: centos at centos.org Subject: (EXT) CentOS Digest, Vol 162, Issue 29 Send CentOS mailing list submissions to centos at centos.org To subscribe or unsubscribe via the World

Hi, I have 5 very identical server running xen 3.0.3 (Debian etch std. packages) with serveral DomUs. Theres my question: It is possible to keep thier lvm volume groups or singe logical volumes synchronized over network? Example: dom01 contains: domU1 on volume group xenserver1 with logical volume domU1 and LV domU1-swp domU2 on volume group xenserver1 with logical volume domU2 and LV

Hi I need to set the number of incoming calls to one, but the outgoing calls should be unlimited. I think the busylevel parameter is for it(incoming calls), but not works. My config is: cat sip.conf [general] [template](!) qualify=yes cc_agent_policy=generic cc_monitor_policy=generic call-limit=2 busylevel=1 callcounter=yes subscribecontext = hint allowsubscribe=yes [100](template)

Does anyone have a recommendation for a good SIP phone with a busy lamp field? I need my operator to be able to see extension status for about 20 extensions and transfer via HOLD + extension button. I've got a pair of SNOM 360s with the sidecar, but I'm very disappointed with them. The buttons are cheap and rubbery like a Sipura 841, the handset cord is short and cheap, the audio quality

Hi Kape, Life is generally good with bristuff and the quadBRI cards. However I've got a concern: how does one return a busy signal to the telco when all B channels are busy? Right now, when all channels are in use, the remote caller is kept waiting until the telco times out and finally get a busy signal (on a land line) or error tone (mobile). On the asterisk side here is the output: --

Ok I have a question. Seen it come and go around the mailling list for a while but never really seen an answer that seems to sort it out. What is needed is some interface from * > Mobile Phone > Mobile Network Service. At this point all the providers in AUS that I have found are charging a Premium Rate for Land Line > Mobile Network services. What I would like to do is be able to

Hey Mike, did you ever have any success figuring out this issue? I am having the same problem (on CentOS 7) with a custom data acquisition PCI card. It seems like the solution might have something to do with delaying the start of libvirtd in systemd until the PCI card (or vfio?) is ready, but I don’t know how to do that. Can anyone else offer assistance? My output: 2016-03-29T18:29:26.191010Z

Hey all, I'm getting an error starting a libvirt managed qemu/kvm VM at physical host boot time, but manually starting it afterwards works fine. This is on a Ubuntu Wily i7-4790 box running Linux 4.2 and libvirt 1.2.16. There is a legacy (5V) PCI card being passed through to the VM, the error seems to relate to that. The error that always appears at boot in

H, I have 5.1. The other day I was printing and the job crashed. I cleaned the /var/spool/cups, but I am still getting the: network 192.168.2.10 host is busy, will retry in 30sec It's a dlink print server, that has worked very well for the last 3 years. I have restarted but the print server and the printer. Any suggestion? -- Thanks

I have a network that sporadically give 'network busy' errors. One morning the workstations will all connect up fine and stay up throughout the days work, yet the next day there is not one machine that can log on to the network. It may run fine for two weeks, then bam, three days of no logins. Yet the internet works fine. Could I copy my smb.conf file and rpm -e samba and re install it?

The clients can't connect , they get the message , "servernot responding, network is busy" . Although Samba (v 2.0.0) seems to run properly on the server (AIX 4.3.3) . Thank you for any help

> Message: 1 > Date: Fri, 08 Mar 2002 08:45:57 -0500 > From: Michael Joyner <mjoyner@ewc.edu> > Organization: MIS - Edward Waters College > To: Thom Paine <thom@darksaber.com> > Cc: Gustav Tresselt <gtressel@broadpark.no>, > Samba List <samba@samba.org> > Subject: Re: [Samba] 'Network Busy' - indeed > > It is a reverse DNS problem.

hi, well, most of the things work right now due to the help of peter svensson, but after heavy use of our ericsson BP250 today several problems appeared. i split into several mails as they are seperate problems. * i can't signal Busy to the calling party. asterisk receives busy from the ericsson PBX but does not forward this to the external caller. i tried with exten =>