similar to: POSTSCRIPT PRINTING THROUGH SAMBA AND LEXMARK Z22

Primarily because I've never gotten it to work despite frequent efforts. Offeding printer is a Lexmark Z53 (supposedly fully supported) and when ever I try to add it to an XP box I get "Server doesn't have the right driver, do you wish to upload the driver?" then when I do it says "Cannot connect to the printer. Contact your network administrator yatta yatta

I made some comments. Maybe the solution is easy. > ##PRINTTOOL3## LOCAL > lexmarkz53:\ <---THIS AND LP BELOW SEEM TO BE DUPLICATES. > :sd=/var/spool/lpd/lexmarkz53:\ > :mx#0:\ > :sh:\ > :lp=/dev/lp0:\ > :if=/usr/local/lexmark/z53/z53.sh: > > ##PRINTTOOL3## LOCAL > z53-outfiles:\ <----THIS IS THE RAW SPOOL YOU'LL WANT YOUR

I have been struggling with samba and printing. My original post is at http://lists.samba.org/archive/samba/msg72613.html. I since then, I built a 2nd box, but this time it is a samba 3.0.0 box. The same thing happens on the 3.0.0 box. The update is that this occurs on the lexmark printer using the Lexmark Z22/32 drivers. If I use a HP driver or a different driver, the job goes to the queue,

I have a lexmark Z53 attached to a linux samba server. My native windows clients and my linux clients (thanks to linux support from lexmark) can print to it with no problem. However, when I use windows over win4lin, the drivers don't install. They always fail with a spool32 error. This happens with the lexmark z32 also. I have no trouble installing other printers from the large list that comes

Date: Fri, 24 Oct 2003 21:30:40 -0500 From: "Robert" <Robertedstrom@yahoo.com> Subject: [Samba] Re: samba 2.27 as print server To: samba@lists.samba.org Message-ID: <bncna4$orb$1@sea.gmane.org> My original post is http://lists.samba.org/archive/samba/msg72613.html. [global] workgroup = Popstar netbios name = Paint-Roller server string = Print Server

Hi, Well, my previous attempt to get info on that matter was lame and therefore no one replied. Here is a second attempt. I need info about how to configure samba server and the windows (2000) client to use a printer on the samba server machine. I read the article: http://de.samba.org/samba/ftp/docs/htmldocs/Samba-HOWTO-Collection.html#AEN833 but all I got from it was confusion. I need a

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 | [root@enigma 0 3]$ rpcclient enigma -U 'root%XXXXXXXXXX' -c 'enumdrivers' | | [Windows NT x86] | Printer Driver Info 1: | Driver Name: [Lexmark Z53 Color Jetprinter] | | | [Windows NT x86] | Printer Driver Info 1: | Driver Name: [Lexmark Z53 Color Jetprinter] | | [root@enigma 0 3]$ rpcclient enigma -U

I have set up samba 2.2.2 (debian package 2.2.2-2, actually). Files are shared out (though Win98 doesnt like my valid users lines, a task for another day). However, it hits the fan when I try to share out my printer to my win2000 system (note: I can print from the server). Ive been through DIAGNOSIS.txt and the HOWTO collection, which didnt help, unless I missed something. Here are some relevant

Hi, I installed the smbclient package in debian... I can connect to shared filesystems on the win98 box //LARRY. Such as smbclient //LARRY/AU. and the also the printer //LARRY/ML1210 (my samsung printer.) But when connected to the printer if I say print. It says the following: oube@debian:~$ smbclient //LARRY/ML1210 added interface ip=10.169.17.94 bcast=10.169.17.95 nmask=255.255.255.248 Got

I'm running Samba 2.27 on RH8 system. I've got samba as the print spooler for Windows XP clients and using winbind as the user validation against my Win2K DC. Permissions on the spool directory are root root with the sticky bit on. Clients can delete their own jobs from the que, but the spool directory is not being expunged of print jobs and the last job constantly displays in the client

Does anyone have any hints or suggestions on getting some JetDirect-based printers set up for bidirectional printing in Samba? We're using LPRng 3.8.0, ifhp 3.4.7, and samba 2.2.2 From the LPRng standpoint, the printers seem to be set up for bidirectional communication fine.. but how do we get Samba to allow bidirectional communication? Thanks in advance! Glenn --- Glenn E. Sieb,

Is there one can give me some information on how to setup printer in Samba so windows can print to it. My file sharing works fine. In winows can't see the printer. Thanks Matthew Wu School Loans Corp. 10780 Santa Monica Blvd, Ste 225 Los Angeles, ca 90025 Tel. 310-474-7456 ext.235 Email mwu@higheredloans.com

I've not been able to get Samba to print to a Lexmark Z53. If I call it a Z52, the driver uploads (to where, I have no idea so I can't check it) but I still can't get anything out of the printer.

I am looking at buying a new home office printer and wondered what you all might suggest. My current printer is a very inexpensive Canon BubbleJet, and I find it clogs frequently, has very small ink tanks, and the Maintenance functions from my XP clients does not work with samba, requiring I switch the printer cable to an XP machine for maintenance. My config is this: - XP Professional

Is there a way foe me to get the print job name to be something other than "remote downlevel job"? All my jobs are now printing flawless except for this. I would like to be able to get a file name or program at least. Thanks Tony McGrew www.multicam.com

Hi, I am a newbie on samba. I use a vmware version which is slightly modified but I hope this group can still help. On the Linux machine I have set a Lexmark printer using Lexmark driver. This works fine but the way it works is that the filter does the actual connection to the printer (which uses USB port) whereas the lp directive is set to lp=/dev/null. (in case this piece of information is

A couple of days ago I set up my printer on my FreeBSD server and set it up so I could print from my FreeBSD client. This all works very well, printing from botht the server and the FBSD client. However, I also have samba set up for file serving with an XP box. I have been trying for quite some time now to set samba up to enable me to print from the XP client. My situation at the moment is that

Dear all I am currently setting up a Samba server and am experiencing a bit of a problem with printing: I have a Canon LBP-1000 connected to the Samba server via the parallel port. Printing directly from the machine works fine. Printing to the printer directly attached to my W2K client works fine, too. When I try to print from the W2K client to the printer connected to the Samba server, however,

I installed CUPS and I have Ubuntu 8.04. I try to install the Z1300 driver (.exe files) but I do not think that Wine is supporting USB and Lexmark printers, yet. Any Idea ? Thanks Mario G.

it doesn't recognize that my all in one is connected.