similar to: EXT3-fs error

Hi, I have updated the kernel to 2.4.21-27.0.2 on Centos 3.4 (was 3.3 when I did the kernel update) and have modified grub.conf to use the single CPU kernel: # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. #

Hi All, Background: I have HP RAID setups (Smart Array 5, shows up as /dev/cciss/c0d0) on my DL380s, and they run great with CentOS. I have had a drive failure (HDD lights up amber), so I pulled the HDD, replaced it and the RAID controller rebuilt the array in a jiffy - no probs. My question: I cant find anything in the logs to alert me that a drive failed - this makes sense since the RAID

Hi to all, from syslinux 4.06 and 5.00 pre 12 came the same dump. Background: While trying to install syslinux on small (700 MB) FAT16 Partition on HP Server got Red Screen of Death with a register dump. Illegal OpCode EAX=00001F01 EBX=000001A4 ECX=00000000 EDX=00000019F EBP=0000FBFA ESI=000007BE EDI=00000800 DS=0000 ES=0000 FS=0000 GS=0000 CS:EIP=0000:000083A6 SS:ESP=1000:0000AFF6

My local centos mirror (ftp.crc.dk) failed to boot after having upgraded from centos 5.0 to 5.1 (i386). It just displays GRUB The cursor is positioned to the right of a space after GRUB, and no input is accepted. I've tried booting in rescue mode and run: chroot /mnt/sysimage grub-install /dev/cciss/c0d0 This completes without errors, but still it can't boot. It's a HP/Compaq

Hello It is my first question here and I would like to thanks all of you to keep alive this stream and to give answers (I regulary read). Thanks for the good job. After installing CENTOS4.2 and "play with" I type the command swapon -s to verify everythings is ok but the command does nor return info as it should do. Is it something known ? Thanks Jean-Pierre Castello HP France mobile :

On Wed, May 25, 2011 at 12:41 AM, JAMES BOND 123 007 <james123007@gmail.com> wrote: > Hi , > I saw your thread post at > http://web.archiveorange.com/archive/v/ZvO4jnaavtTfcyqnHoRX > , about problems with XEN 4.0 installation. > I have the same problem and my machine is similar to yours( HP Proliant > DL380G6, 4GB-RAM) This question is better asked on the xen-users list.

I am trying to build lustre-1.6.6 against the pre-patched kernel downloaded from SUN. But as written in Operations manual, it creates rpms for 2.6.18-92.1.10.el5_lustrecustom. Is there a way to ask it not to append custom as extraversion. Running kernel is 2.6.18-92.1.10.el5_lustre.1.6.6smp. -- Regards-- Rishi Pathak National PARAM Supercomputing Facility Center for Development of Advanced

Hi all, I have a kickstart file that works for /dev/sda. I now need to detect an HP server and use /dev/cciss instead of hard coded /dev/sda. How can I detect what the name of the device is and use /dev/cciss and not /dev/sda? Jerry

Hi everybody. I have an HP StorageWorks array connected to one of my servers, connected via an LSI controller (lspci reports: SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)) on an HP DL385 running CentOS 5.5 x86_64. I have set up multipath and all is working but, when I create a snaphost and export it as a new LUN from the HP web interface, it

Hello I do have problem using Linux with an external HP tape drive. The server platform is also an HP Server; the server is an HP ML350 G4, and the Tape drive is a HP Storage Works Ultrium 448 - 1U Rack-mountable. HP Ultrium documentation says two drivers should be automatically up, sym53c8xx for LSI SCSI interface "st" for tape and /proc/scsi/scsi should contain information about

Already making use of it, thank you! http://www.justinconover.com/blog/?p=17 I took 6x250gb disk and tried raidz2/raidz/none # zpool create zfs raidz2 c0d0 c1d0 c2d0 c3d0 c7d0 c8d0 df -h zfs Filesystem size used avail capacity Mounted on zfs 915G 49K 915G 1% /zfs # zpool destroy -f zfs Plain old raidz (raid-5ish) # zpool create zfs raidz c0d0

I have continued on with my attempts to get p2v working will little success. I have changed my server to Fedora 16 and finally got an XP with a single SATA disk (sda) to work. I think that this means that the current virt-p2v.iso just doesn't work with the packages that are available on Centos 6 at the moment. However, the machines that I currently need to actually migrate all have

Hey guys, I need to use iostat to diagnose a disk latency problem we think we may be having. So if I have this disk partition: [root at uszmpdblp010la mysql]# df -h /mysql Filesystem Size Used Avail Use% Mounted on /dev/mapper/MysqlVG-MysqlVol 9.9G 1.1G 8.4G 11% /mysql And I want to correlate that to the output of fdisk -l, so that I can feed the disk

It seems I can't smarm monitor disks on RAID controllers? I tried on several machines with two different controllers and on all I get this when starting up smartd: Jul 27 14:36:43 c1 smartd[5944]: Opened configuration file /etc/smartd.conf Jul 27 14:36:43 c1 smartd[5944]: Configuration file /etc/smartd.conf parsed. Jul 27 14:36:43 c1 smartd[5944]: Device: /dev/sda, opened Jul 27 14:36:43

All, We are encountering spurious errors with ext3. After some period of heavy IO we may see messages similiar to: EXT3-fs error (device cciss/c0d0p5) in start_transaction: Journal has aborted When this happens the filesystem is remounted read-only. If it's the root filesystem the system becomes unresponsive and must be rebooted. An fsck on the affected filesystem shows lots of corruption.

Hi In our office environment few servers mostly database servers and yesterday it happened for one application server(first time) the partion is getting "read only". I was checking the archives, found may be similar kind of issues in the 2007-July archives. But how it has been solved if someone describes me that will be really helpful. In our case, just at the problem started found

I have a third party application that I want to run a CentOS4 box that is expecting to access the generic SCSI devices through /dev/sga, /dev/sgb, etc. However, the devices set up by udev are /dev/sg0, /dev/sg1 etc. Does anyone know what syntax I could use to create a udev rule that creates symlinks sga -> sg0 etc. for each sg[0-N] device? Thanks James Pearson

As mentioned last night, we''ve been reviewing a proposal for hot spare support in ZFS. Below you can find a current draft of the proposed interfaces. This has not yet been submitted for ARC review, but comments are welcome. Note that this does not include any enhanced FMA diagnosis to determine when a device is "faulted". This will come in a follow-on project, of which some

Dear ALL, I have encountered an issue while installing xen4.1.2 from source. No problem encountered while xen installation.While booting towards XEN kernel, i encountered the folowing error ******************** setuproot: moving /dev failed : No such file or directory no fstab,sys mounting internal defaults setuproot: error mounting /proc setuproot: error mounting /sys Kernel

Hello I have the feeling this may not be the right forum for the following question, but I d like to try it here anyway: This is the case: I had a 3x72GB HDD RAID5 shared external disk drives (HP MSA500), totalizing about 145,6 GB of data. I needed to increase the available amount of data, so I added a 4th 72GB HDD and using HP ACU I expanded my existing RAID5 Array, I have now about 218,5