similar to: (no subject)

I have my main machine running Centos 5.6, and it has a HP Deskjet 810c printer physically attached to it. CUPSD broadcasts in on my LAN as the default printer. I can print to the default HP printer over the LAN, from a laptop running Centos 5.6. However, I do have problems trying to print to this same printer over the LAN, from a laptop running M$ Vista. Has anyone been able to print from

Ok, I've managed to print to my HPDeskjet 694c attached to a Solaris 8 box running samba 2.2.2 from Win98. Problem is with the left margin, there are these little lines (garbage) running down the 1st column on the left side of the page. Also, when I print a page from Word 97, the whole page doesn't print (about 95% of it) and starts a little too far down the page. Printing was perfect

what I have: a SuSE 8.0 pro, running samba 2.2.3a as a PDC a deskjet 895 cxi configured in cups cups configured to accept the application/octet-stream mimetype me wanting to upload winXP and win98 drivers to the samba server so that clients just connect, then get the drivers. uploaded drivers from winxp box (bot xp and '98 drivers) directories on samba's PRINT$ ressource got created and

I am using RedHat 6.1, the R1.1.0 binary download, and an HP Deskjet 692C. For some time I have been trying unsuccessfully to integrate R postscript graphics in LaTex. I consulted the Bug Tracking System. In the preamble of the LaTex file (test.tex) I have placed the line \usepackage{graphicx,color} and I use \begin{figure}[htbp] \begin{center} \includegraphics[height=4in]{graphic1.ps}

I have Samba 2.2.7 running on Redhat 8 (fully updated). I have two printers set up - a laser and a Deskjet 920C both connected to the Redhat server via USB cables. Printing is managed using CUPS although I get the same problem with LPR and Webmin configured printers. The laser works fine, the deskjet doesn't. The deskjet works with a generic windows HP Deskjet or HP Deskjet plus driver in

I've got Samba 2.0.3 running on my Linux box. Marvin is the samba server. Bugs is the NT box. Attached is the relevant part of my smb.conf file. I removed several parts from what's attached to save bandwidth. What you see is simply the part that pertains to my printer. I can't print to the DeskJet printer. The printer appears in my network neighborhood, but I just can't get

I have [global section] [global] printing = cups cups server = desktop printcap name = /etc/printcap load printers = yes [HP DeskJet 5700] comment = HP Deskjet 5700 map to guest = Bad User browseable = Yes guest only = Yes path = /var/spool/samba guest ok =Yes public = Yes printable = Yes printer name = deskjet-5700-1 use client driver = Yes yet when I try to add this printer,

RH Linux 9 on AMD k6-2 500 Using HP deskjet 930c on USB Samba version: 2.2.7a cups version: 1.1.18 Hello - I have had a good look on this newsgroup - and what I've picked up I think is allowing me to ask these questions more intelligently. I've also had a good look at the CUPS documentation aswell as the Samba documentation. 1. Am I correct is assuming that CUPS only likes postscript,

Morning... Just spent this evening getting printing setup off my FreeBSD machine (oh, how I love Solaris at these times *groan*)...got it now so that I can print directly from Netscape, color and graphics and all. The printer is an HP 560c. Now, I want to be able to print from my Windoze95 machine, and have samba setup for that, as well as file sharing. If I setup my Windoze machine such

I have a Deskjet 690C connected to my machine running RH7.1 + linux 2.4.13 + samba 2.2.2 installed from RPM. I have setup the printer with RH's printconf-gui as a local printer. In local use it works fine. I have the following in my /etc/samba/smb.conf: --<snip>-- [global] security = share printcap name = /etc/printcap load printers = yes --</snip>-- and

Hello, I was hoping someone could help me with migrating printers from a WinNT4 print server to a Samba server. I have searched the web for days and haven't found a solution. I am running Slackware 10.1; kernel 2.4.29. I upgraded Samba to 3.0.21c recently and I am using LPR v3.8.28 as my print spooler. Here is the response from the 'rpc migrate printers' command:

Hello all, Does anybody share HP Deskjet 6940 and HP Deskjet 6988 off a samba server successfully? I currently using Samba versions 3.0.24 Ubuntu Fiesty Fawn in my production environment. I also the issue occurs on my laptop which is running Gutsy Gibbon 7.10 which uses Samba 3.0.26. The issue is when my users try to print multiple copies they can not through the samba server. These printers

Hello I have got the following problem: My Samba printer doesn't allow multiple copies, when trying to print from a client machine. (Unix printing works fine with multple copies). When I enter more than one copy into the "number of copies" field on a WinXP client machine, I get the error message "This printer cannot print the specified amount of copies. The amount of copies is

Hi All. Can anyone give me a hand here? I'm trying to remove some printer drivers from my samba server running on FreeBSD 4.6 using rpcclient. 'enumdrivers' shows: rpcclient $> enumdrivers [Windows 4.0] Printer Driver Info 1: Driver Name: [hp deskjet 930c series] [Windows NT x86] Printer Driver Info 1: Driver Name: [HP DeskJet 930C Series] Printer Driver Info

Hi, I successfully setup printing on my FreeBSD box using Samba with apsfilter and lprng. However, I have encountered two issues: 1) Cannot print multiple copies of documents from my windows box (e.g. notepad). Only the first copy is printed and the rest don't get printed. 2) My spool directory is getting filled up and I would like the job removed after the print job is finished I've

I have added an HP Deskjet 600 to my debian etch system, using CUPS. It is working fine. I would like to set it up so that I can occassionally print to it from a Windows 9x machine. This is where I seem to be having trouble. I consulted the HOW-TO docs on the samba site, but they are quite detailed and confusing (for me). I don't want to do anything that will cause the printer to work

Howdy all - I have Samba 2.0.3 running like a champ on a dual PPro 200, 128 MB RAM, running Slackware 3.6, kernel 2.2.5. Running like a champ as far as file sharing is concerned, that is. I have an HP Deskjet 1000c hanging off the parallel port. I set up a raw printer in /etc/printcap, the line looks like this: dj1000|DeskJet 1000c:sh:lp=/dev/lp0:sd=/var/spool/lpd/dj1000 the printing section

I can't get my HP DeskJet D2345 (USB) to work on my CentOS 5.3 machine. It'll work on another machine (with Fedora 7). I compared the installation details (in CUPS http://localhost:631) - seems that Cent does not have the driver. On the F7 machine, the device is "D2345 (HP D2300 series)" and the driver is "HP DeskJet D2300 Foomatic/hpijs". When I try to config my

Ooops, I guess a suject will get some of you to read this, hey? Hi All, Wondering if there is a document that tells how to get wine printing through a cups printer working? Yes I know the wine docs say it's all magic and if you're using cups your printing will magically work, but for some reason, it doesn't, my wine session crashes and burns when I try to print from the built in

Hi All, Wondering if there is a document that tells how to get wine printing through a cups printer working? Yes I know the wine docs say it's all magic and if you're using cups your printing will magically work, but for some reason, it doesn't, my wine session crashes and burns when I try to print from the built in notepad (or any other apps I've tried: in particular, Lotus