similar to: installing samba

Hi! By iptables I set marking (-j MARK) just before -j IMQ. There are only three marks. Exectly all of them are ditected to 1:20 Why I see 3 pkts in default 1:30? How explain it? ### imq0: queueing disciplines qdisc htb 1: r2q 10 default 30 direct_packets_stat 0 Sent 631429 bytes 1812 pkts (dropped 0, overlimits 20) ### imq0: traffic classes class htb 1:20 root prio 0 rate 100Kbit ceil

Means "acclaim" in both Norwegian languages (there are new official rules out today for writing both of the 2 Indo-European Norwegian languages). What made me write this acclaim is the number of postings I've seen about Samba's instability - i.e. run-away processes, profiles going wrong, ACL problems and more. My (high school) site with around 80 w2k workstations, of which

I know, I know... don't use the non-standard kernels unless you have to... BUT: I have a D-Link N150 USB card. Bus 001 Device 004: ID 0846:9030 NetGear, Inc. WNA1100 Wireless-N 150 [Atheros AR9271] This isn't supported in C5, but it is supported in newer kernels (ath9k_htc). So let's try NDISwrapper: # rpm -i kmod\-ndiswrapper\-1.56\-1.el5.elrepo.i686.rpm

Source: xen Severity: grave Tags: security Hi, the following security issues apply to Xen in jessie: CVE-2014-5146,CVE-2014-5149: https://marc.info/?l=oss-security&m=140784877111813&w=2 CVE-2014-8594: https://marc.info/?l=oss-security&m=141631359901060&w=2 CVE-2014-8595: https://marc.info/?l=oss-security&m=141631352601020&w=2 Cheers, Moritz

Hello R users, I am a researcher at the University of Michigan looking for a solution to an R problem. I have loaded my data in from a mysql database and it looks like this > data ds c1 c2 1 2010-04-03 100 0 2 2010-04-30 11141 15 3 2010-05-01 3 16 4 2010-05-02 7615 14 5 2010-05-03 6910 17 6 2010-05-04

On Mon, Jul 6, 2015 at 8:43 PM, Johnny Hughes <johnny at centos.org> wrote: > On 07/05/2015 11:35 AM, T.Weyergraf wrote: >> Hi folks >> >> As mentioned in the subject, kernel-3.18.12-11 is missing firmware files >> required to run Broadcom/Qlogic network cards, driven by bnx2x driver. >> While in the source-rpm, there is a bnx2/bnx2x firmware tgz being

Any chance this wireless USB can be made to work on 32 bit CentOS 5.5? [root at young ~]# /sbin/lsusb Bus 001 Device 003: ID 0846:9030 NetGear, Inc. Bus 001 Device 001: ID 0000:0000 Bus 001 Device 002: ID 413c:0108 Dell Computer Corp. [root at young ~]# uname -a Linux young 2.6.18-194.26.1.el5 #1 SMP Tue Nov 9 12:54:40 EST 2010 i686 i686 i386 GNU/Linux Thanks in Advance -- Reynolds

On Wed, Nov 19, 2014 at 11:45:02PM +0100, Moritz Muehlenhoff wrote: > Source: xen > Severity: grave > Tags: security > > Hi, > the following security issues apply to Xen in jessie: > > CVE-2014-5146,CVE-2014-5149: > https://marc.info/?l=oss-security&m=140784877111813&w=2 > > CVE-2014-8594: >

On 07/07/2015 12:00 PM, Johnny Hughes wrote: > On 07/07/2015 10:36 AM, Akemi Yagi wrote: >> On Mon, Jul 6, 2015 at 8:43 PM, Johnny Hughes <johnny at centos.org> wrote: >>> On 07/05/2015 11:35 AM, T.Weyergraf wrote: >>>> Hi folks >>>> >>>> As mentioned in the subject, kernel-3.18.12-11 is missing firmware files >>>> required to

https://bugzilla.samba.org/show_bug.cgi?id=5183 Summary: -r --include= --exclude= broken for version>=3.0.0pre5? Product: rsync Version: 3.0.0 Platform: x86 OS/Version: Linux Status: NEW Severity: normal Priority: P3 Component: core AssignedTo: wayned@samba.org ReportedBy:

Hi folks As mentioned in the subject, kernel-3.18.12-11 is missing firmware files required to run Broadcom/Qlogic network cards, driven by bnx2x driver. While in the source-rpm, there is a bnx2/bnx2x firmware tgz being applied during the rpm build, along with a patch adding these firmware files to firmware/Makefile, neither the tgz nor the patch contain the required firmware files. In 3.18,

Processing commands for control at bugs.debian.org: > retitle 770230 xen: CVE-2014-5146 CVE-2014-5149 CVE-2014-8594 CVE-2014-8595 CVE-2014-9030 Bug #770230 [src:xen] CVE-2014-5146 CVE-2014-5149 CVE-2014-8594 CVE-2014-8595 Changed Bug title to 'xen: CVE-2014-5146 CVE-2014-5149 CVE-2014-8594 CVE-2014-8595 CVE-2014-9030' from 'CVE-2014-5146 CVE-2014-5149 CVE-2014-8594

https://bugzilla.netfilter.org/show_bug.cgi?id=1428 Bug ID: 1428 Summary: Unable to dnat to port without defining destination address in inet table Product: nftables Version: unspecified Hardware: All OS: All Status: NEW Severity: enhancement Priority: P5 Component:

I have 2 identical AudioCodes MP-112s. They have the same config except for the SIP usernames/passwords and the device IP. The configs in extension.conf and sip.conf are also identical. On one box, when I pick up the phone, I get a fast busy and the logs/debug show an automatic hangup. On the other device, I can make calls without a problem. I can even call the phone that can't make a

Processing commands for control at bugs.debian.org: > close 770230 4.5.1~rc1-1 Bug #770230 [src:xen] xen: CVE-2014-5146 CVE-2014-5149 CVE-2014-8594 CVE-2014-8595 CVE-2014-9030 Marked as fixed in versions xen/4.5.1~rc1-1. Bug #770230 [src:xen] xen: CVE-2014-5146 CVE-2014-5149 CVE-2014-8594 CVE-2014-8595 CVE-2014-9030 Marked Bug as done > thanks Stopping processing here. Please contact me if

Hi, I'm using Samba 2.0.7 and I'm experimenting with shares at the moment. I created a share on my SuSE 6.4 box and accessed it from a Win2000 machine. Than I deleted this share entirely, and expected that I wouldn't be able to see it anymore from the win2000 box (after refreshing the view in windows explorer) but the opposite happened. What could be the explanation and the

Hello All, I can run the "lower level" functions OK, but many of the higher level (eg. parSApply) functions are generating errors. When running the example (from the snow help docs) for parApply on MacOSX 10.5.5, I get the following error: cl <- makeSOCKcluster(c("localhost","localhost")) sum(parApply(cl, matrix(1:100,10), 1, sum)) Error in

Processing commands for control at bugs.debian.org: > severity 770230 important Bug #770230 [src:xen] xen: CVE-2014-5146 CVE-2014-5149 CVE-2014-8594 CVE-2014-8595 CVE-2014-9030 Severity set to 'important' from 'grave' > thanks Stopping processing here. Please contact me if you need assistance. -- 770230: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=770230 Debian Bug

Hi, Is it possible to use a live audio stream in asterisk I want to call a number and then hear an external audio stream. For example http://www.radioveronica.nl/radioveronicaplayer/radioveronica.asx I thought it was possible to use musiconhold, but I did not get it working. This is my musiconhold.conf ; ; Music on Hold -- Sample Configuration ; [general] [default] mode=custum

On 07/07/2015 10:36 AM, Akemi Yagi wrote: > On Mon, Jul 6, 2015 at 8:43 PM, Johnny Hughes <johnny at centos.org> wrote: >> On 07/05/2015 11:35 AM, T.Weyergraf wrote: >>> Hi folks >>> >>> As mentioned in the subject, kernel-3.18.12-11 is missing firmware files >>> required to run Broadcom/Qlogic network cards, driven by bnx2x driver. >>>