similar to: problems with samba and Perc/2 RAID

does anyone know of a work-around for using a Dell Perc2/DC scsi controller with CentOS 4.4? thanks, Gerard.

I have an external HP SureStore DLT VS80 with a SCSI LVD 68 pin interface and an external HP SureStore DAT24 with a SCSI Centronics 50 pin Narrow SE interface. The cable for the DAT has a Centronics connector at one end and a 68 Pin Wide to Narrow terminated connector at the other. The cable for the DLT has a LVD/SE 68 pin connector at both ends. I have terminator blocks for both devices.

Hello R users, This is more of a convenience question that I hope others might find useful if there is a better answer. I work with large datasets that requires multiple parsing stages for different analysis. For example, compare group 3 vs. group 4. A more complicated comparison would be time B in group 3 of group L with B in group 4 of group L. I normally subset each group with the

hmm HFSC ? where can i find more informations and examples about the *linux* HFSC ? http://trash.net/~kaber/hfsc/ does not help here -- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

I meant to send this to the list but evidently only sent it to David. Since sending it I've done a second test which shows what a successful snmpset looks like. First attachment, from the forwarded email, is nutout.txt. Second attachment is snmpout.txt. nomad -------- Forwarded Message -------- Subject: Re: [Nut-upsuser] [EXTERNAL] SNMP shutdown timing out Date: Mon, 4 May 2020 09:28:57

Hi there. I got myself a pair of old Intel Xeon blades, which I plan to repurpose with CentOS. The model is : HP bl20p-g3 server blade Manual http://h18004.www1.hp.com/products/quickspecs/12322_ca/12322_ca.pdf Now, the main problem with this hardware is that LVD UW SCSI HDDs are hard to find and hella expensive if you find em (and of reduced capacity). Any of you know: 1. If there's any

Release notes say no support for the RAID card in a box I just picked up...is there no hope for this box running 2.6 kernel? http://www.redhat.com/docs/manuals/enterprise/RHEL-4-Manual/release- notes/as-x86/ The kernel shipped with Red Hat Enterprise Linux 4 includes the new megaraid_mbox driver from LSI Logic, which replaces the megaraid driver. The megaraid_mbox driver has an improved design,

Hi, We are running into a problem with a Samba setup and would like to know if a current fix or workaround is at all possible. Our setup is a NetApp filer serving NFS v4 that is mounted by Solaris and Linux servers. On those servers we are using Samba to create shares of those NFSv4 mounted filesystems. We are migrating to this NFSv4 setup from an existing Solaris NFSv3+Posix ACL setup that also

I went to RedHats' page and found hardware requirements and it said that the Dell Poweredge 6300 is a supported hardware. Then I went to linuxcare.com and it does not list the machine. Before I look like a buffoon, or continue to, Redhat will run on this machine, right? I appreciate the help. Thanks, --------------------------------------------------- Tony Ricker Technology Coordinator

Hi, The server is running CentOS 5.8 Linux OS on Dell PowerEdge R710 having raid controller card 03:00.0 RAID bus controller: LSI Logic /Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05) /usr/sbin/smartctl -a /dev/sda smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Device: DELL PERC H700 Version: 2.10 DELL

Hello, I am running error rate analysis. It is my results below. When I compare aov1 and aov2, X square = 4.05, p = 0.044, which indicates that adding the factor "Congruity" improved the fitting of model. However, the following Z value is less than 1 and p value for Z is 1, which means that "Congruity" is not significant at all. Therefore, these two parts are not consistent,

Does anyone know if a PERC H200 is a real RAID controller? I'm about to build a box to CentOS 6.5 (it was Windows...) with RAID 6 on Monday, and this PE R610 has this.... I'm familiar with PERC 6 and 7s, but just dunno 'bout this one. mark

we have several R900 servers with PERC 6/E card in it. Recently it we getting some message on /var/log/message say change to "write back" and change back to "write through". We figure out it is PERC 6/E card battery weak. My questions are: 1. some battery only use one year (some even shorter) and already this problem. 2. How come PERC 5/E does not have this issue? 3.

Hello, I'm curiuos if anyone knows if it's possible to set up a Dell R515 (which has PERC H700) to be JBOD. It seems the only options are RAID0 or RAID1. I read posts, where people say it can by done by making each disk its own RAID0.? This works, but it wigs out when that disk is removed, and forgets a disk was ever there (unless I go back in the PERC and fix it). My plan is to have a

We have several DELL R900 server with PERC 6/E adapter in it. O.S. is CENTOS 5.5. recently one of server continue pop-up messages on /var/log/message for switch status between "write back" and "write through". ============================== Dec 6 08:09:31 host01 Server Administrator: Storage Service EventID: 2189 The controller write policy has been changed to Write Back.:

Hello and apologies for being off-topic, but this is my last option! I've been looking for a PERC simulator to help with training, but for the life of me, I cannot find it anywhere on the internet! I even called Dell to see if they can offer me a download link to no avail. I know there is one somewhere as I've seen screenshots of it *[0]*! If anyone has it and is willing to help,

On 4/28/20 1:58 PM, David Zomaya wrote: > snmpwalk -l authpriv -v 3 -u user -a MD5 -x DES -A authpassphrase -X > privpassphrase Evidently, even with argument identifiers order matters. That worked just fine and dandy. Now I guess I need to play with the order of the nut-scanner arguments to see if I get a similar result. thanks, nomad

Hi all, I have a server which is really difficult to restart because of usage requirements and the fact that it's in a co-lo rack so miles away. I've added a couple of drives which I'd like to bring up and add to LVM but the config I know is in the PERC BIOS and requires a reboot. Can the config be changed in the openmanage suite and if so can someone point me in the right

Hello, Is the dell perc 4dc raid card supported by centos 4 and does it work reliably? thanks Jon

I am looking at using a dual Xeon Dell 1850 with a PERC 4e/Si raid controller. Is anyone using these in production right now? If so can you share some of your experiences? Thanks, Geoff