similar to: backup_list_request

I updated samba to samba-2.0.7-4 (RedHat RPM). That didn't help. I changed the file ownership to user.group from user.user. That didn't help. I changed the file permissions to -rwxrwxr-- as you had suggested, and then it worked. (QuickBooks 99 needs *both* the file permissions set as noted *and* the ownership also.) However, when everyone closes QuickBooks the QBI file is deleted, and

Linux 2.2.14, samba 2.0.7 Summary: samba kept __MSBROWSE__ registered but thought it was not the master browser. Details: 1) samba started and became master browser (6/13/2000 0.00) 2) then there was a problem on the network (I played with ipchains...) 3) samba received an announce from a win9x pc claiming it was MB (6/13/2000 circa 8.00AM) Due to the problems of point2, the election that

Hello everyone. I have a question about setting up a WINS server and to allow browsing across VPN tunnels. Let me give my setup... Running FreeBSD 4.9, with samba-3.0.4. Sole purpose right now is to just be a WINS server on the corporte network. We have 3 VPN tunnels setup at remote locations that will need to access the network and browse the corporate network. All the clients on the 3 branch

In case anyone was interested... this turned out to be a Super BONEHEAD problem.... My printer name was "testron". Well... come to find out, I have a share with the same name. Imagine that. Just an FYI to those new to samba... can't have printer & share names the same. ======================== I've recently started adding WinXP (and 2000) clients to my network.

Hello, I get the folowing error msg in rpcclient -c 'adddriver' command: ERROR: string overflow by 1 (1024 - 1023) in safe_strcpy [adddriver "Windows NT x86" "My Driver Name 001:aaa] Printer Driver My Driver Name 001 successfully installed. My command is like this: rpcclient MYSRV -s /etc/samba/smb.conf -A auth.txt -c 'adddriver "Windows NT x86" "My

I''m a Xen newbie, still trying to get oriented. I''m especially interested in building from sources, and I''m looking for some clarifications. Does anyone here build from sources, or should I perhaps subscribe to the developer''s list? At the moment, I''m mainly interested in just being a Xen user because I need to get up to speed here before even

Hi everyone. I''m a Xen newbie and I''m trying to get oriented here in the xeniverse. (Can I say that here?) My eventual goal is to set up multiple virtual xen servers in a minimum number of physical "boxes". My only knowledge of Xen so far is my careful reading of the famous paper "Xen - the Art of Virtualization". So I went to the web and searched Xen

Greetings! I'm running Samba 2.2.5 on HP-UX 10.20. I've recently started adding WinXP clients to my network. Here's my issue: I installed a WinXP machine on the network. I was able to add a bunch of samba-networked printers to the Xp machine. I recently added 2 new printers to the network. I added the printer names to my samba "printcap" file. I'm able to

I'm having a problem with my XP & 2000 pc's, with printers. During the initial installation and configuration of these machines, everything is fine. But any printer added to the network AFTER the initial config of the winXP & win2000 pc's, isn't available to these machines. So... if I add any printers to my network, I can't use them with my winXP or win2000

I'm running Samba 2.2.5 on HP-UX 10.20. I've recently started adding WinXP (and 2000) clients to my network. Here's my issue: (It seems to effect both the XP & 2000 machines) I installed a WinXP machine on the network. I was able to add a bunch of samba-networked printers to the Xp machine. I recently added 2 new printers to the network. I added the printer names to my

Hi. Im tryuing to boot a 486 laptop with syslinux. I want to boot from a CF card in an IDE adapter, plugged into the IDE interface. my procedure is: fdisk (create 1 partition, mark it bootable) mkfs.vfat (format it) syslinux /dev/disc/partition copy bzImage to the partition and rename it LINUX this fails either with a blinking cursor and no text, or a 'Boot failed' prompt. if I format

I'm running Samba 2.2.5 on HP-UX 10.20. I've recently started adding WinXP clients to my network. Here's my issue: I installed a WinXP machine on the network. I was able to add a bunch of samba-networked printers to the Xp machine. I recently added 2 new printers to the network. I added the printer names to my samba "printcap" file. I'm able to add these

there is not this entry like this ?? henry -----Urspr?ngliche Nachricht----- Von: Ron Bombard [mailto:ronb@nativetextiles.com] Gesendet: Dienstag, 3. Juni 2003 22:52 An: Henry Human Betreff: Re: [Samba] (no subject) In your smb.conf file... there's a line something like this: lock dir= /opt/samba/var/locks Make sure this directory EXISTS and is read/writeable. Just a suggestion. >

Greetings! I'm trying to build Samba3.0beta. I'm running HP-UX 11.11 I'm using GCC 3.2.3 I ran the configure script. Then I ran Make. It crap's out pretty much immediately. If anyone could look at the output below, and offer a suggestion, it would be greatly appreciated. I'm sure its something bone-headed that I'm doing wrong. Thanks! Ron # make Using FLAGS

Hi, I'm trying to configure samba-1.9.18p8 to act as a wins server, to be able to browse between the two networks here at work (192.9.200.x and 193.127.209.x). Calix, the server, has one eth on each network, and has the wins support = yes. (No, it has no wins server = xxx line :)) It's been several days trying to make it work, and, with a debug level of 2 and 3 I've seen something

Hi, I have a problem with the inheritance of ACLs, respectively the removal of the inherited ACLs in subdirectories. The following szenario: By default the access rights (including ACLs) should be inherited, but it should also be possible to remove the access rights from any subdirectory. Therefore I've set up the following configuration: [Finanzen] path = /shares/finanzen msdfs root =

I've RTFM (inlcuding the very nice BROWSING.txt and BROWSING-Config.txt) as well as the archives and I can't find any info on my particular problem. Any assistance at all would be most appreciated! Background: I am trying to use samba to control the browse lists for our main workgroup throughout our enterprise. I set up a samba server on AIX. It is a WINS server, as well as the Domain

Hello all, Is it possible to package controllers, models and views in a plugin? The tutorials for plugins seem rather sparse at the moment... I''ve written a form "widget" that I''ve been using as a partial that I would like to reuse in other projects. I was thinking about making a component out of it, but I need to be able to access some of the form data that it

I upgraded my samba package on my RedHat 6.1 installation via RPM. I used the samba-2.0.7-20000425.i386.rpm file. I had to first uninstall the packages: samba-common-2.0.5a-12 samba-client-2.0.5a-12 because of package dependencies. I'm guessing, then, that the samba-2.0.7-20000425 package includes the files that had been included separately with the common and client packages. Is this

Hi, I have been able to generate association rules for Market Basket Analysis using the following codes: **************************************************************************** ******************************************* library("arules") rules <- read.csv("write1.csv",na.strings=c(".", "NA", "", "?"),header=TRUE)