similar to: Slow writes from MS-DOS LanMan Client to Samba server

A detailed description of our status and dilemma is given below... This week I've been on samba.org and searched the MARC mailing list archives for discussions pertinent to our situation. My search for "slow DOS client" produced over 100 hits dating back to the last millennium, some of which were really about something else. Many of the rest were descriptions of problems VERY

We have some speed/performance issues: We have a 100M fullduplex private network setup to handle rsync transfers to our "mirror" server with a command like: time rsync -e ssh -avzl --delete --rsync-path=/usr/local/bin/rsync \ --exclude ".netscape/cache/" --delete-excluded \ bigserver:/staff1 /mirror/bigserver It takes about 20 minutes to check/transfer files from

PXE-On-A-Disk from (ftp://ftp.scyld.com/private/jlehan/pxe-on-a-disk.html) was posted on syslinux mailing list: http://syslinux.zytor.com/archives/2005-December/006222.html. It is being mentioned by syslinux wiki, or some other documentation of syslinux that I currently can't find. I tried etherboot2ethersel.pl from PXE-On-A-Disk (ftp://ftp.scyld.com/private/jlehan/pxe-on-a-disk.html)

Hokay. It appears that enumdrivers / getdriver in rpcclient is broken, and won't be fixed soon. I'd fix it meself, but hey, I'm too busy clearing skyscrapers in a single bound and moving faster than a speeding bullet. Or maybe I looked at the cvs once and got REALLY scared. Unfortunately, I can't wait, so I've come up with a nasty hack to help us with querying samba for the

Hi I am trying to setup remote printer management commands, so the users could add and delete printers from "Printers" share of Samba in Windows. I have this script, that is launched using an administrator account, when I add a printer from there, using a new TCP/IP port: ================================================================ #!/bin/bash {

Dear Group, I'm running the following setup; Yoper v2, Kernel 2.6.8.1-7, Wine 20040914 on a Toshiba Satellite Pro 4600. The Toshiba has a Yamaha AC-XG. In addition I have a USB Plantronics DSP100. After some tweaking I got wine to install x-ten lite; I have pasted my config file; [WinMM] ; Wine supports the following sound drivers: ; winearts.drv ; for KDE ; winealsa.drv ; for

The low speed of writes with the MS-DOS, MS newtworking client has to do with the limit of MAXSENDSIZE (from TCPUTILS.INI) By default, the value is 1024, but the maximum value is 2048. If this value is not set to the same as the Samba server's SO_RCVBUF, then performence will suffer GREATLY. We had a Windows system hosting Norton Ghost images, but it took a dive, and our company has

Hi there, I have a client in a network using a samba-server that has to use MSDOS, because some software running on it needs a clean DOS. I installed the DOS-Client for TCPIP that is available from Microsoft V 1.0 and it works fine; the only thing is, that it takes so much memory below 640 K, that another program also running under DOS does not function correctly anymore. Maybe some of the

Ok, quick rely, i got a memory freshup.. The samsung driver in the xml, is not package aware. See: KB3170455 (w7) KB3163912 (w10) which is the cause of this problem. Now removing these KB's is not option. So we are back to : https://docs.microsoft.com/en-us/windows-hardware/drivers/print/constructing-a-package-aware-driver-with-updated-core-drivers Read it, but this is what we are

From: Michel Dänzer <michel.daenzer at amd.com> Signed-off-by: Michel Dänzer <michel.daenzer at amd.com> --- Chris / Ilia / Ben, this should be manageable for the intel/nouveau drivers, right? src/amdgpu_drv.h | 26 ++++++++++++++++++++++++++ src/amdgpu_kms.c | 18 +++++++++--------- src/drmmode_display.c | 8 ++++++-- 3 files changed, 41 insertions(+), 11 deletions(-)

sorry to be a little off list, but I am provisioning sipura spa-2100 with firmware 3.2.1 Finally they got it working with fullduplex ethernet wan. The wan ethernet mode can be configured only by provisioning but I didn't find the provisioning field's name and the possible values. Is there some one that has just done it? thanks Rosario -------------- next part -------------- An HTML

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hi, i tried to compile and run Samba 3.0.20pre2 on one of our servers yesterday. The servers OS is FreeBSD-5.4. the configure run was okay, except for the aio part, but thats another point. compiling went fine and installation too. After starting smbd and nmbd i saw all printers but unfortunately all driver association where lost! i found out,

I have sucessfully gotten steam and wine to work however I cannot use microphone for voice communication , I an using alsa .Is there a way to turn on fullduplex sound like you do in winex by going into config and changing fullduplex=Y or does wine not support such a feature?

On 19/08/24 21:32, Marco Gaiarin via samba wrote: > > Samba in AD mode, of course; printer server on a domain member with cups. > > > For the second time i'me lost, on a server, all the associaton between > printers and drivers, so i've to set it all. > > Old samba 3 was clear: > > https://www.samba.org/samba/docs/old/Samba3-HOWTO/tdb.html > > but

2000) into dos, and with your boot disk, read the share listing of machine A from a linux box and mount it, and the rsync the whole drive if shared (say c:\ with c:\winnt and all the good stuff). Though, i still could NOT actually restore this 'mirror' image like i could a 'mirror' image of a linux root?? So, ultimately, there is no reason to even waste the hard-drive space

Is there anyway to get Samba to pass back printer driver data to a client the way NT print servers do. This makes life so much easier. From the Samba source, it looks like the 'driverdata' field for a printer is just set to the string "NULL". The CIFS specs that I found don't discuss what should be returned in that field. NOTE: I am already using the DRIVERNAME configuration

Hello everyone, I'm aware that the new level-4 printer drivers are not supported by Samba. But level-3 drivers, that are used by Windows 7 and earlier, should also work with Windows 8. Unfortunately, if you try to use a level-3 driver from a Windows 8 client using the point-and-print mechanism, you will always get the message, that there's no driver available. I couldn't find a

Hi all, New to NUT dev, i was hoping someone can clear up an issue i have with the unix socket naming for me (FYI my C is not that great). I'm using 2.0.5 and this stems from a problem with the general admin of Nut but looking at the code led me to think maybe it's a bigger issue (thus i joined this list). Right to start with if i have the following in ups.conf: [apc]

Hello, when I assign a printer driver to a printer from a windows client, the printername now changes to the drivername. Yes, I can see the SPOOLSS_SETPRINTER call with the printername property, but that's definitly not what I want (or would expect). E.g. when I change the drivers of 3 printers to HP Laserjet, I get 3 printers with the names "HP Laserjet [(Copy 1|2)]". These

Hi, When I try to add a printer using APW, the printer gets added successfully. However, when I try to add a printer using the MS_RPC addprinter command, the script fails with access denied. Please let me know if I am doing anything wrong. Thanks, Guru. The addprinter vbscript dim oMaster, oPrinter set oMaster = CreateObject("PrintMaster.PrintMaster.1") set oPrinter =