similar to: Samba is now a logon server for workgroup ... on subnet 127.0.0.1

rh61, 2.2.14. The problem is in 2.0.6 also. 1st samba is wins server. 2nd samba uses the 1st samba as wins server. All is ok, but if I use interfaces = eth0 127.0.0.1 bind interfaces only = yes (is there anything wrong in the above lines?) in the 2nd samba, then I get the following in the log.nmb of the 2nd samba: [2000/03/29 15:45:30, 1] nmbd/nmbd.c:main(743) Netbios nameserver version

I setup the samba server to be a wins server on my network when ever I browse the network it takes for ever to come up and sometimes it takes awhile to even to bring up the share or I don't see them. I am using lmhost on win xp system and the linux system for dns. When ever I do restart on the samba server it gives me this error. (shutting down nmb services ./smb: line 201: kill (6442) - no

I have a new MDK 9.1 server running iptables, pop, smtp, ftp, www, ssh, and trying tio get samba up on it. The box has two nic's in it. inside net is 192.168.1.0/24 the outside is a /28 net I have uip forwarding running and also shorewall. I also have an older Samba box running on the internal net. The problem is this. All the winblows boxes can see the old samba server but not the new server.

Hi I've got a home-made, small file server running on Samba 2.4.1.11 from Debian Wheezy backports repo. I've noticed following lines in log.nmbd file: [2014/11/17 22:54:00, 0] nmbd/nmbd.c:66(terminate) Got SIGTERM: going down... [2014/11/17 22:54:00, 0] libsmb/nmblib.c:856(send_udp) Packet send failed to 127.0.0.1(137) ERRNO=Operation not permitted [2014/11/17 22:54:00, 0]

hi, i setup a samba-3.0.0-2 server under redhat 9. i added this server to a win nt 4.0 domain controller. the nt domaincontroller only runs the following services: wins, dhcp & pdc. nothing more. /etc/samba/smb.conf: [global] workgroup = SCHLICK-ROTO server string = Server - File hosts allow = 172.24. 127. printcap name = /etc/printcap load printers = yes log file =

When using the global options: ================================ interfaces = eth0, lo bind interfaces only = Yes hosts allow = 192.168.1. 127. ================================ and a secondary loopback address: ================================ ~ # ip addr show dev lo 3: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet

The only thing related to 'addresses' in my /etc/samba/smb.conf file is a "hosts allow": hosts allow = 192.168.3.0/24 127.1 I'm going to ignore the 'local hosts case, as if I solve the other, the localhost case may get solved by inference. I thought the 'hosts allow' would allow any host on the local 192.168.3.0/24 subnet. The hosts have no problems

Hi... I have exactly the same problem with lsarpcd giving the error "ERROR: setgroups call failed!". Anyone know of a fix?? MWP > Hello > > I was just installing the new TNG 1.0.5 and after i installed and cleaned the > logs i started the dameons and was unable to access the shares on win98. The > computer showed up in Network Neighborhood but i would get a \\comp03

Hi All, On my first internal NIC, Samba is working perfectly. On my new, second internal NIC, I am getting the following in my messages log: libsmb/nmblib.c:send_udp(793) Packet send failed to 192.168.254.255(138) ERRNO=Operation not permitted nmbd/nmbd_packets.c:send_netbios_packet(163) send_netbios_packet: send_packet() to IP 192.168.254.255 port 137 failed I though .255 was a reserved

Looking for a solution to this problem. I have Googled all over the place but haven't found a definitive answer. I have a Samba Server that ONCE was on a network where there was SECOND Samba Server with IP Address 192.168.20.3. Today, the FIRST server is on a network with an address range 10.0.0.0/255.255.255.0 and it has no way of finding that SECOND Server 192.168.20.3. However,

Hi, Semi-not new to samba, used a previous version a long time ago. I'm using samba on SuSE 9.0, samba version 'Version 2.2.8a-SuSE' 2 network cards on this machine, eth0&1. I've enabled the samba server on this machine and it is functional. However, i only want samba to serve the file system on one of the network cards and not the other. Is this just a simple

SEND: Teoman TURHAN Hi teams. I installed samba 2.0.9 on Alpha server TRU64 unix 4.0F. But I cannot configure --with-dfs because this Tru64 unix was installing chosed filesystem type UFS filesystem. but I used ./configure command and make and make install. I installed ADVFS file system 2 days ago samba 2.2.2 on TRU64 unix. but I don't live a problem. all services were running. UFS BUG

Hi all I have an Opensuse 11.1 64 bit acting as a PDC with all this pachages: samba-3.4.5-3.1 bind-9.5.0P2-18.1 dhcp-server-3.1.1-6.3 openldap2-2.4.12-5.3 It was working great for the first 6 months as a logon and file server for around 40 windows computers. But lately from time to time the samba server loses to be the master browser, and the only way to solve this problem is rebooting de entire

I admit theres a LOT about the windows networking I dont understand - and even though this may NOT be a SAMBA issue per se, I thought I'd post it here. Have a 400gb samba server thats been working well (am upgrading to current patches today, btw). I've got 3 Win2k workstations, on two subnets, that have drives mapped, and connect every morning on startup just fine. All the machines

Hi all! As a die hard slackware user and as a part of my learning pam process I installed debian bookworm (12.4.0) in a vm and setup a domain member server per the instructions in the wiki trying to figure out how debian does it so I can correct some issues I have with how it's done in slackware. Everything seems to be working fine except for the winbind offline logons, what I tried was to

Hello, I installed recently a samba server 3.0.0-15 on Fedora as PDC, it works - generally speaking - but i have a few problems with it (I should begin with "i'm samba virgin - my first time :) ). So, first thing, i was expecting to have something like windoze network neighbourhood in konqueror (smb://), meaning all computers from my network browseable no matter what system they

Hi, We're running samba 3.0.25a as a PDC on FreeBSD 6.1 in our office and few weeks ago, our samba PDC (and soon all the service hosted on this server) stop responding suddenly :-/ Everything went back to normal as soon as we disconnected from the network, all the hosts that were in the same room as the 10.0.0.20 host (after asking the domain user connected at that moment to this host, do

Hi team, I'm dealing with AS/U as a member server on a Samba 3.0.20 PDC. Jonction seems ok, and from the member server I can see PDC's shares (with net view) and authenticate user (with net logon user passwd /domain:domainname). On the other side, I fell into timeout when running smbclient -L member from the PDC. Here is a log.nmbd loglevel 10 from PDC as there is no other log

Hi. I got this email-address from BUGS.txt file of the samba distribution. I read it carefully. I got configured and working samba, I work with samba above one year. I still have a problem, and, according to the samba log output, I think it's probably a bug. When I try to use the shares with audit support, I have my Far disconnected and telling me that something is wrong. I have that

I am having trouble with one of my samba PDC's. It does not recognize itself as the domain master browser even though it is set to be so. I can not add machines to this domain and I suspect this is why. Has anybody seen this or know what causes it? Notice this: DOMAIN_ALBANY(3) current master browser = ALBANY_PDC DOMAIN_NYC(2) current master browser = NYC_PDC