similar to: swat setup

I have had a RH5.2 server running Samba up for a long time. I upgraded to Mandrake 6.0. It broke Samba, so I reinstalled using the RPM on the CD. Samba works just fine, but SWAT will not! If I try to start it manually (/usr/sbin/swat) it just hangs. In /etc/services I have a line like this: swat 901/tcp In /etc/inetd.conf I have: swat stream tcp nowait.400 root

Hey, so i finally got it working thanks to your list (found the right place for EnablePlainTextPassword here, the existing 3-4 matches in the default registry don't seem to do a thing). It was all brilliant. I got connected to all my 4 samba servers. I was happy... 'til the next boot (you know, during installation of system, boots happen). Now it connects to 3 sambas (1 on FreeBSD, 1 on

Hello, I am running Samba on a FreeBSD box in a network of Windows95 machines. I have Samba installed on the FreeBSD machine and I want to set up a /tmp directory so everybody can read that wants to. I think I have this done but everytime somebody tries to map to \\SERVER\tmp they get prompted for a password. I don't want them to get prompted for a password, can somebody give me an example

Hi Samba User Group Maybe that's a stupid question, however i have a severe problem with that. I'm running samba 2.0.4b on suse linux 6.1 and windows nt4 sp4, german version. I need the domain admin to be a member of the local admin group, If I log into the local domain as admin I cannot add the domain admin to the local admin group, because of miising privledges in the domain. If I log

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Trying to run ./configure and after a while of chugging along, I get this: checking for four-argument statfs (AIX-3.2.5, SVR3)... no checking for two-argument statfs with statfs.fsize member (4.4BSD and NetBSD)... no checking for two-argument statfs with struct fs_data (Ultrix)... no checking if large file support can be enabled no checking

Sorry about the previous message... Note that the maintainer listed in MAINTAINERS is no longer active, so perhaps it should be updated? I've found a problem with SMBFS and *really* long pathnames. It causes the kernel to OOPS, and sometimes corrupts the kernel stack. I've even had it corrupt the SLAB allocator so bad that no binary could be run :) REPORTING-BUGS format answers, let

Here's the sitch: I have a RH 6 machine and an NT 4.0 SP3 machine that I want to use Samba to make the Linux box space available to the NT client. There is no DNS, and there is no Internet connection. Each of the two machines has a "dummy IP", specifically 192.168.255.253 (NT) and 192.168.255.254 (Linux). Trying to browse on the NT box results in either a "Cannot obtain list of

Dear all, (Sorry if the question has already been answered.) Could someone please suggest a good text editor for writing R sources ? (I know emacs exists ... but I find it a bit heavy). I use crimson (http://www.crimsoneditor.com) which is small and simple, but the R syntax seems not to be supported. Thanks for any advice

Dear List.... sorry to bother you R-gurus with such an "unstatistical" question... but I face a problem using Crimson Editor with R 2.01.1 that I never had using R 2.00.1. I already posted on the Crimson Editor forum but it seems to be VERY few R-users there.... I successfully used R v2.00.1until now (under Windows XP professionnal, version 2002, Service Pack 2, P4 processor CPU 1.8

I have the following scenario: PSTN gateway (202.180.nnn.nnn) -> OpenSER 1.0.1 (147.202.nnn.nnn) -> Asterisk 1.2.16 (203.89.nnn.nnn) When an incoming call is received, often (but not always) Asterisk repeatedly sends a SIP 200 OK message and eventually hangs up the call. sip.conf [general] port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind to (all

I'm running tinc 1.1pre11 with AutoConnect set to 'yes' and I recently started seeing lots of these messages on my VPN and cannot connect to various hosts from other hosts: (I have obscured the hostnames and vpn name, but otherwise this is a direct paste from syslog) Aug 19 14:51:51 AAA tinc.nnn[2217]: Got REQ_KEY from XXX while we already started a SPTPS session! Aug 19 14:51:54 AAA

Hi Jayson, I forward your request to the right place. Carlos (or some other) will have an answer, or at least some questions for you. -- Arnaud 2008/6/27 Jayson Anderson <jayson.anderson at gmail.com>: > Greetings Arnaud, > > I wrote you some time ago about whether NUT would support the Belkin > F6H550-UPS device in the future. > > You had replied and mentioned to send

I have a remote installation that connects via IAX from my office pbx. When I call an extension on the remote pbx, after the dial period, the call is terminated. Nothing I do in configuration of that extension seems to matter: -- Executing NoOp("IAX2/netconcepts@nnn.nnn.nnn.nnn:4569-5", ""Dial 710"") in new stack -- Executing

Hello, I've been trying to get samba set up to authenticate users off a W2003/ADS system and it appears to be working for the most part. However, there is one issue plaguing me and I'm not sure how serious it is. In brief, the Windows SID => Unix GID mapping is failing in odd ways. After getting things set up, the following work: * wbinfo -g (lists all domain groups, ie DOMAIN+user)

I've attempted to change my smb password on a remote NT PDS, but it always fails with resolve_name: Attempting lmhosts lookup for name SERVER<0x20> getlmhostsent: lmhost entry: 127.0.0.1 localhost resolve_name: Attempting host lookup for name SERVER<0x20> Connecting to nnn.nnn.nnn.nnn at port 139 error connecting to nnn.nnn.nnn.nnn:139 (Connection refused) unable to connect to

I have a question about software bridge setup (initscripts). If one sets up a bridge network: ifcfg-eth0: DEVICE=eth0 ONBOOT=yes BRIDGE=br0 HWADDR=xx:xx:xx:xx:xx:xx ifcfg-eth1 DEVICE=eth1 ONBOOT=yes BRIDGE=br0 HWADDR=xx:xx:xx:xx:xx:xx ifcfg-br0 DEVICE=br0 TYPE=Bridge BOOTPROTO=static BROADCAST=nnn.nnn.nnn.255 IPADDR=nnn.nnn.nnn.nnn NETMASK=255.255.255.0 NETWORK=nnn.nnn.nnn.0 ONBOOT=yes Deep

Hi, I just upgraded my entire environment from Tinc 1.0.24 (or prior) to the most recent version from git (1.1pre10+), using ED25519. Sometimes, especially after some failed authentication attempts or timed out authentications, I get the following log messages: 2014-08-11 21:51:10 tinc.NNN[3376]: Connection with XXX (1.2.3.4 port 1) activated 2014-08-11 21:51:10 tinc.NNN[3376]:

Hi, I would like to be able to use R with a connection to a PostgreSQL database. I am using R 2.0.1 on windows XP. I have tried installing both the DBI and rDBI packages (which is better?) but in either case I run into the same problem - when i try to use either the dbDriver or dbConnect functions i'm told the function couldn't be found. Seems like the packages aren't installing

Hello, I have just downloaded Samba 2.2.7.a and I have tried to set it up on AIX 4.3.3 and am not having luck. Last week I installed samba on my linux machine and it works pretty well. The boss asked on Friday if I could set it up on my AIX machine. I have samba installed in /usr/local/samba. After running /usr/local/samba/smbd -D and /usr/local/samba/nmbd -D I can do this ps -aef |

I have a client host that I don't have access to now, which attempts to establish ssh connection back to my BSD server using the private key. Client runs this command: /usr/bin/ssh -i ~/.ssh/my_key_rsa -o "ExitOnForwardFailure yes" -p $HPORT $HUSER@$HOST -R $LPORT:localhost:$LPORT -N On the server debug log looks like this: Connection from NNN.NNN.NNN.NNN port 43567 debug1: HPN