similar to: smbpasswd fails on Samba 2.0.3, HPUX 10.20

Hi there ! I just upgraded (last friday night) our main Samba host to Samba 2.0.0 from version 1.9.18p10. This host provides access to our own file based database system. The number of Samba clients is around 60 (nearly all NT4.0's and few NT3.51's). The Samba 2.0.0 host runs 'uname -a': HP-UX vertex A.09.05 A 9000/720 65914162 two-user license After the upgrade change I've

Hi, I am unable to log into samba anymore since I upgraded to 2.0.3. I've attached my smb.conf below and I've even gone to trying the CVS releases to see if one of them will help. First of all, I get soemthing like {33}: smbclient -L vilnius -U mharrell Added interface ip=207.97.105.146 bcast=207.97.105.255 nmask=255.255.255.128 Password: session setup failed: ERRSRV

Howdy all - I have Samba 2.0.3 running like a champ on a dual PPro 200, 128 MB RAM, running Slackware 3.6, kernel 2.2.5. Running like a champ as far as file sharing is concerned, that is. I have an HP Deskjet 1000c hanging off the parallel port. I set up a raw printer in /etc/printcap, the line looks like this: dj1000|DeskJet 1000c:sh:lp=/dev/lp0:sd=/var/spool/lpd/dj1000 the printing section

Hi folks, I'am using Samba 2.0.0 on a Linux and a Sun box and i have the following problem: I can log in from a smbclient but not from an NT Client using Security=Domain. 1.) Doubleclick on the machine opens the password dialouge (which should'n appear, beacuse i'am already logged in the domain) Enter my domainusername and password. Window dissapears and appears again and forces me

Here is our configuration : SAMBA Server : HPUX 10.20 SAMBA 2.0.3. Only the parameter workgroup has a non default value. There is one share defined (no homes). All share values are default, except read only=no, comment and path (smb.conf is managed with swat which has made some cleaning in the previous smb.conf file) SMB Client : Windows NT 4.0 SP3 or SP4 (both tested) - modified registry to

Any and all attempts to connect to our samba server, packaged in the redhat RPM found on samba.org, have failed. The allow statement is set to localhost, x.y.z. where x.y.z is our class C(ended with a period, as per the online help in SWAT.) Local connections via smbclient work beautifully, but connections from any other machine fails. I've followed the troubleshooting procedure to the

I am having problems getting samba to run on HPUX 11. Details: HPUX 11 samba 2.2.2 and 2.2.3a gcc 3.0.1 configure options: --prefix=/samba --with-pam --without-winbind Problem: 1) I am running with logging level at 3 and see many PANIC messages. PANIC: failed to set gid log entry: [2002/03/07 18:55:58, 3] smbd/server.c:exit_server(492) Server exit (normal exit) [2002/03/07 18:56:18, 3]

I have samba correctly setup to share resources between my linux box and my win98 clients (The encrypted passwording disabled accoringly). I tried to configure it for domain logons with my win98 clients, by enabling WINS server, domain logons, and master browser in the smb.conf. When I login on my win98 machine, I get an error saying that the password is incorrect (which it isn't) or the

I'm trying to run 2.0.3 on HPUX 11.0, and thus far have not had any luck. I can run testparm without any error message. I've tested many smb.conf files, some from the examples directories, others from web sites, and many of my own creation, but all give the same set of errors. It's because none of the changes that I make to smb.conf have any impact that I'm starting to think

Hello, i've some problems with the plp printer spooler on linux: I changed from bsd printing to plp printing. Previously (with bsd style printing) i was able to browse and delete active printjobs, stop and activate printers from within the win9x/winnt boxes. After changing to plp this is no longer possible. The printjobs themself are still printed. Some output in the log.smb (with debug

Hi all, I recently loaded Samba 2.0.3 on AIX 4.3.2, everything seem to be working fine except that every now and then a user will be prompted that the username/password was incorrect. After trying to enter the username and password their domain accounts are locked. Up until this point they were connecting with out any problems. They will have their account reset and everything is ok again for a

Hi ! I have a problem after changing NT sp3 to sp4 and Samba from 1.x to 2.0. Now 20% of file transfers crashes with errors: [1999/01/29 09:34:37, 3] smbd/error.c:error_packet(138) error packet at line 1540 cmd=50 (SMBtrans2) eclass=1 ecode=6 What's that? System is practically unusable... I use Linux 2.0.36 or 2.2. The handshake is: [1999/01/29 09:34:37, 3]

Samba is causing a couple huge problems for the NT admins here since we switched a bunch of machines to security=server and started running nmbd. We're running Samba 2.0.2 and 2.0.3 on a mix of Solaris, HP-UX, and OSF1 machines. One, selecting a Samba server in Server Manager, then selecting Computer/ Services causes Server Manager to crash ("An application error has occurred, blah blah,

>From a Windows Explorer window I can see my Samba Server machine under MyNetworkPlaces:EntireNetwork:MSWindowsNetwork ... but cannot open it. I get \xxx is not accessible. ... The account is not logged into this station. My XP clients are logged onto to a workgroup. The corresponding linges generated in log.<client> on the server machine are shown below. [2003/02/21 11:59:52, 3]

Hullo, All... I have HPUX 10.20 with SaMBa 2.2.3a installed... All I want to do is make a single share with read only access for everybody, no matter the user people are using, in other words, they don't need to have the user on the server side. I tried to setup, with no success. Anybody knows something? Thanks...

Greetings, Does anyone have any experience of how to perform a samba password syncronization with hpux 10.20 trusted system? Question number(2) how does run generate a smbpasswd file on hpux trusted system? Please advise, currently stuck and sinking.

Hi all I am sure that there is some mention of this error in the docs somewhere but I could not find it. So, sorry for repeating it here. I have installed samba 2.0.3 on solaris 2.5.1 I carried out all the tests described in the documentation. They were all successful. Bu from an NT server I can't do this net use z: \\server_name\\tmp System error 86 has occurred The specified network

Hi! When I enter smbpaswd as a normal user iget the following error: Connecting to 127.0.0.1 at port 139 machine 127.0.0.1 rejected the password change: Error was : The specified password is invalid. Failed to change password for mgoeben and in the logs I got: ==> /var/log/samba/log.smb <== [2000/08/16 18:39:57, 3] locking/shmem_sysv.c:sysv_shm_open(707) Initialised IPC area of size

Hi, I have a samba server which should act as a domain controller. I did not set up the server by myself. I can "see" and use the servers shares with windows and linux clients. Everithing - including the security settings - for the shares works as expected. I can join a client to the domain, this works with manual adding the machine account as well as with the adduser script . I

Hey, I've troubles with a samba-installation ( version 3.0.2, HP-CIFS-Technologie Preview ) on HPUX 11i. I want to setup a fileserver within a customerenvironment connecting into a windows 2000 domain, which contains a lot of trusted domains. I have joined the domain already and wbinfo brings me the list of users and groups. Also within the winbind_imap.tdb I see some entrys which seems to