similar to: Samba within a network IP over ATM

hi there... I need help to install Samba last release in HP-UX 10,20 and 10.10. I allready run the tar over my samba1_9_18p8_hpux-10_tar and it gave me the following directories: var, bin and lib, the var directory does not have anything, and i can't figure out how to install software. Please send some doc about it. your friend Alvaro

Hi all, I patch my kernel (2.6.17) and my tc (iproute2-2.6.18-061002) utilitie for an accurate packet scheduling on an ATM link. I configure my HTB hierarchy on the upload of the link and try with differents flows. It works correctly but in some of case I lose about 50% of my bandwith. I use the overhead (42) configuration for my link (PPPoE, VC/LLC) indicate in the documentation. My question

Hi all, I patch my kernel (2.6.17) and my tc (iproute2-2.6.18-061002) utilitie for an accurate packet scheduling on an ATM link. I configure my HTB hierarchy on the upload of the link and try with differents flows. It works correctly but in some of case I lose about 50% of my bandwith. I use the overhead (42) configuration for my link (PPPoE, VC/LLC) indicate in the documentation. My question is,

The Applied Research Lab (ARL) of Washington University and the ATOMIC-2 Project at USC/ISI are pleased to announce the availability of a BSD device driver for the Adaptec 590x series of PCI ATM host adaptors (eg ANA-5940) Written by Chuck Cranor of Washington University's ARL (chuck@ccrc.wustl.edu), the "MIDWAY" ATM device driver originally supported Efficient Network's

Does anyone here have experience with an ATM connection from their ISP running into a linux based router? We have a DS3 circuit for which we we thought we could use an SBE wanpci-1t3 card. The isp verified the card would work with their network, but apparantly didn''t cross check the particular circuit they were providing us. Is it possible to do the IP packet <-> ATM cell

Hi all, we have a very large customer (90'000 PCs) worldwide that has problems with a Samba server. Here are the details : platform : IBM 4-cpu server runing AIX 4.3 Samba : 2.2.7a compiled with gcc 2.95.3 clients : about 100-200, worldwide network : ATM, at least for the server (I don't have more details, sorry) samba config : pretty straightforward, security=server (might be

I Patch the kernel and tc with ''Patches to Linux''s traffic control engineto allow it to accurately calculate ATM traffic rates'' I use a router with eth0 e adsl interface, i launch this script to have shaping on eth0 egress interface: tc qdisc add dev eth0 root tbf rate 10000000 burst 100k latency 20ms mtu 1500 mpu 64 i The traffic enters on adsl and go out on eth0 ,

Hi, I use the patch (http://ace-host.stuart.id.au/russell/files/tc/tc-atm/) for accurate the packet scheduling on ATM/ADSL link and i think I''ve found a bug. I tried to write to the author but he didn''t answer me. I work on a Linux 2.6.17 with the iproute2-2.6.18-061002 package. I change the type of the cell_align char to short of the struct tc_ratespec in the file pkt_sched.h

Is it possible to dynamically do bandwidh reservation? That is, I want to limit the traffic to 50% for upload and download, but if there aren''t onbound traffic, who is doing a download will get 100% of bandwidh and if there aren''t inbound traffic, who is doing a upload will get 100%, but if there are both inbound and outbount traffic, each one get limited to 50%. I think this

On Thu, 2007-06-28 at 12:28 +0200, Marek Michalkiewicz wrote: > Do you have an updated version of your patches for the latest > kernel (soon to be 2.6.22), iptables and iproute? Or can the > current patches be safely applied (with some merging by hand, > but no significant changes) to the latest sources? No, not yet. But I am in the process or moving my production systems from

Hi there.I''m Brenda from the Australia,I wanna work on a project relating to VOIP QoS.I wanna evaluate IP over ATM against IP over Ethernet on the following parameters relating to voice and video traffic; bandwidth consumption packet loss packet delay(latency) jitter traffic thoroughput Is this project feasible?Can I use NS to simulate the models?I hope you reply.Thanks. Best regards.

Is there any interest in having ATM support for the various digium T1 cards? dave -- Dave Weis "I believe there are more instances of the abridgment djweis@sjdjweis.com of the freedom of the people by gradual and silent encroachments of those in power than by violent and sudden usurpations."- James Madison

This patch fixes the following compile error with CONFIG_BRIDGE=y and CONFIG_ATM_LANE=m: <-- snip --> ... LD .tmp_vmlinux1 net/built-in.o(.init.text+0x3ad1): In function `br_init': : undefined reference to `br_fdb_get_hook' net/built-in.o(.init.text+0x3adb): In function `br_init': : undefined reference to `br_fdb_put_hook' net/built-in.o(.exit.text+0xa2): In

Hi, Someone know how to use the dqisc atm (sch_atm) ? I can''t find some doc about it. Thanks, Edouard. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Author: elowe Repository: /hg/zfs-crypto/gate Revision: 1e626c708d19873645f833d0507362c3a5731c08 Log message: 6333712 SunFire 25K panics with IB card installed with HSI/P or ATM installed Files: update: usr/src/uts/sfmmu/vm/hat_sfmmu.c

I know there is that handy patch available to very efficiently use ATM bandwidth, but I was wondering what the best values to use with a non-patched iproute2 would be. Anyone here care to check my logic in coming up with these numbers and perhaps suggest better values? My transmit speed is 768kbps per ADSL line (I have two). This is the HTB shaping I do on the interface (logic used for this

I have read the thread at http://mailman.ds9a.nl/pipermail/lartc/2006q1/018287.html and still don''t know how to fix this problem. It appears alot of work has gone into it but the HOWTO is so out of date it doesn''t even begin to addresses this method. So here are my questions 1. what is the current state of these patches? are they in a specific version? do i have to patch myself?

Yo All, I am trying to install Samba 3 beta on my RH 8 machine. At the installation of red hat I chosed not to install samba. I downloaded beta rpm for Red Hat and when I try insatling it I get a msg. like "flie blabla conflicting with file from samba-2.2.7'' or something like that. Now I try runing comand rpm -q samba end that tels me there is no rpm samba. Not installed! Right?

Hi, I have installed AreskiCC on Slackware 10.1 with Asterisk latest CVS and Postgres 7.4. First of all the instructions are very confusing and hard to follow if you are not an expert. But, I managed to install it and.obviously t doesn't work. The other instructions I found on wiki are a great effort but incomplete. Basically the first thing that happens is that when I load

dear All, I'm trying to set Shadow options in Ldap with the help of phpLDAPadmin. This is *what I know : * */Shadowmax : /maximum nr of days a pw can be valid * /ShadowLastchange : /contains the last change of the shadow file * Shadowwarning : nr of days before expiration to warn user. *What I'm trying *to do is have the users 's passwork expire, that works ok. But how can I have