similar to: Installation of SAMBA 2.0 on Solaris 2.6

Say I have a raidz of 3 disks: ad4 ad6 ad8 I want to tell zfs that I am pulling ad4 and replacing it with a new disk on the same controller, but I can''t get it to release its hold on ad4. [0138][root at ztest:/home/matt]# zpool offline pond ad4 Bringing device ad4 offline [0140][root at ztest:/home/matt]# zpool replace pond ad4 cannot replace ad4 with ad4: ad4 is busy

Okay, so like this? PHONE1+AD0-SIP/2000 PHONE2+AD0-SIP/3000 PHONE3+AD0-SIP/4000 ALL+AD0AJAB7-PHONE1+AH0AJgAkAHs-PHONE2+AH0AJgAkAHs-PHONE3+AH0- Then you would have Exten +AD0APg- s,1,Dial(+ACQAew-ALL+AH0-,20) Is that right? I have read about the Macros but don't understand their use. Could someone provide an example? Sorry about the newby questions... This will hopefully be my

Here is an example of a couple of macros that help me where I have a SOHO with a home phone line and a work phone line. If I pick up line 2 my work line I would prefer the call I make to go out my office phone line same with if I pick up line 1 my home phone line I would prefer it go out my home line but want it to roll if needed. So with this little macro it is possible for that to happen.

Hi After my previous email about the SETFEATURES SET TRANSFER MODE timeout on (msgid 441AA807.5090100@wfeet.za.net , 17 March 14:18 GMT + 2 on freebsd-stable), I installed FreeBSD 6.1 BETA 4 and upgraded to a 6-STABLE kernel, running the box in 'safe' mode to do so. I now, however, get a slightly different error message: ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout

Hi, after one month with gmirror and gjournal running on a 7.0-RELEASE #p2 amd64 (built from latest CVS source), the box hung a couple of times when on high disk load. Finally, while building some port it won't boot for no reason obvious to me. This is what I get with kernel.geom.mirror.debug=2: ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: 476940MB <SAMSUNG HD501LJ

Hello,all I can't add samba to the domain with the command net join, the error is like this: net join -U usrname -S ***** Enter usrname's password: [2009/03/26 11:03:55, 0] utils/net_rpc_join.c:net_rpc_join_newstyle(393) Error in domain join verification (credential setup failed): NT_STATUS_INVALID_COMPUTER_NAME Unable to join domain **. I can ping the domain server and

I am attempting to install 7.1-BETA2 (from CD) onto a PC with a Promise SX4060 RAID controller and two Seagate 120GB ATA disk drives. The boot from CD keeps repeating the following (error) messages: (I'm retyping here) ============================================================================ ================== ad4: WARNING - SETFEATURES SET TRANSFER MODE task queue timeout - completing

I have been using 2003 AD servers for winbind for many years, and now 2008 is phasing in, but I can't authenticate using the new servers, and I'm not sure what to do. All advice very welcome. This is a problem for me on both Gentoo (samba 3.0.33) and Debian Lenny (samba 3.0.24). For debugging, I ran winbind interactively and piped output to a file (winbindd -d 3 -i). I have also

Hi, according to http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/amr/amr.c?only_with_tag=RELENG_6 it seems MegaMGR for linux now can work. Any experience? -- Cris, member of G.U.F.I Italian FreeBSD User Group http://www.gufi.org/

Hi, Recently I've decided to play with gjournal. Main reason was a promise of avoiding full fsck check after unclean shutdown. I've successfuly configured gjournal on existing filesystems (all UFS). And then it happened - my system had a power failure. After boot, it forced me to run fsck manualy. Nothing special, I did it before... But this time it failed on gjournaled disks.

Hi, I''m running FreeBSD 7.1-PRERELEASE with a 500-gig ZFS drive. Recently I''ve encountered a FreeBSD problem (PR kern/128083) and decided about updating the motherboard BIOS. It looked like the update went right but after that I was shocked to see my ZFS destroyed! Rolling the BIOS back did not help. Now it looks like that: # zpool status pool: tank state: UNAVAIL status:

hail, I have a 7-stable: [matheus@xxx /usr/home/matheus]$ uname -a FreeBSD xxx 7.0-STABLE FreeBSD 7.0-STABLE #2: Sun Jul 6 15:03:26 BRT 2008 root@lamneth:/usr/obj/usr/src/sys/xxx_7 i386 and there exists three geom things. gconcat status Name Status Components concat/concat0 UP ad4 ad5 gmirror status Name Status Components

Hi all, I'm faced with a problem applying the sp package: The projection argument in readShapePoly(Shapefile,proj4string="CRS class argument") e.g.: CRS("+proj=aea +lat_1=46 +lat_2=73 +lat_0=60 +lon_0=84 +x_0=0 +y_0=0 +ellps=clrk66 +units=m +no_defs") doesn't have any impact on the plotted object. I also tested the simple example: xy = cbind(x = 2 * runif(100) -

Hi, I have a server (Dell PowerEdge SC1435, ServerWorks HT1000) on which I'd like to try installing FreeBSD. I've already failed to make 7.0 work on this box and was wondering if you have information about the behavior of the upcoming 7.1 on this hardware. I've been following the "HT1000 chipset errata saga" thread, and the commits by sos@ to CVS (around Jan 2008), but have

Hi I have a newly installed FreeBSD 6.0 release machine on which I am getting the following error on the console: "ad4: req=0xc23bc258 SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER Will Robinson !!" This is generally associated with heightened disk activity, but it happens inevitably after a while (minutes or hours) if the machine is running. The atacontrol list shows:

Hi, I am using FreeBSD 8.2 and went to add 4 new disks today to expand my offsite storage. All was working fine for about 20min and then the new drive cage started to fail. Silly me for assuming new hardware would be fine :( The new drive cage started to fail, it hung the server and the box rebooted. After it rebooted, the entire pool is gone and in the state below. I had only written a few

I am having problems with silent data corruption on (some) drives connected to an MCP55 SATA controller. I have two servers, both running RELENG_7_0/amd64. One has the 570 Ultra chipset, the other has 570 SLI. Both chipsets have the MCP55 SATA controller. The server with 570 Ultra chipset has a bunch of older 250GB SATA-150 drives hooked up to the MCP55 controller and it is working just fine.

Hi I'm trying to analyse some data and need to set the geographic coordinate system before I can do the analysis. I've been trying to use the project command in rgdal but keep getting an error message saying: Error in project(locationsMatrix, PROJECTION.OUT) : latitude or longitude exceeded limits ( PROJECTION.OUT <- "+proj=aea +lat_1=-18 +lat_2=-36 +lat_0=0 +lon_0=132

Hey folks, So what's the word on AHCI and bios drive geometry? I'm having a real pain of a time trying to get some 750gb sata drives running on my FreeBSD7 box in AHCI mode. It doesn't seem to matter what disk geometry I suggest to sysinstall, something complains of an invalid disk upon booting it. Actually, in AHCI mode the bios screen doesn't report any information on

Before reading below: I am considering a new install rather than an upgrade of our servers. However, now I just want to beat this problem. :) At 02:19 PM 7/8/2003 +0000, Phil Pennock wrote: >On 2003-07-08 at 14:09 +0000, Phil Pennock wrote: > > There was a fairly major update to the IDE disk device handlers which > > required new device nodes. Bringing in the new MAKEDEV script