similar to: Rsync will not work with WD network drive!

Hi, I am using cwRsync on windows xp and getting following error when I start the rsync client to do local copy. Looks like some kind of permission issue. Any configuration to be done on windows or rsync side? C:\Program Files\cwRsync\bin>rsync -tvvvv ..\license.txt ..\dest cmd=<NULL> machine=<NULL> user=<NULL> path=..\dest cmd[0]=. cmd[1]=..\dest rsync: pipe: Operation not

Hi, I have installed cwRsync Server on Windows Server 2000. I having problems starting the Rsync Server service. If I try to start it manually. I get a message says; Could not start Rsync Server service on the Local Computer The service did not return and error. There could be an internal windows error or internal service error. If the problem persists contact your system administrator I have

Hello, I'm using cwRsync on windows (I've tried a few alternatives, like Delta for example, but all of them behave equally (bad) in my case - they set really weird permissions on binaries - I don't know which ones exactly, but binaries cannot be executed). I have a linux server with binaries for different platforms. When I rsync (copy) linux binaries to linux, or copy mac binaries

Hi all! We're using cwrsync server 2.0.4 on winxp to keep files up to date between some operator machines. Whenever I run rsync to send files to another machine, the read-only flag gets set. The cwrsync user was created (the install is completely standard)... so I'm thinking it might have something to do with that. Here's my rsyncd.conf: use chroot = false strict modes = false

Hi, I wonder how I should use the SET and ENUM data types in my MySQL database combined with a rails application. This is my current _form.rhtml file for products: ------------------------------------------------------------- <%= error_messages_for ''product'' %> | <!--[form:product]--> <p><label for="product_name">Name</label><br/>

I'm trying to set up nut with a MGE UPS equiupped with a network management card, but encountered a problem. UPS: MGE Pulsar M 3000 Network Management card (installed in the UPS): 66102 (2006 edition) Operating system: FreeBSD Nut port version: 2.0.5 Nut driver: snmp-ups According to MGE in Norway this card is supported by nut, but only the old version of the card (66244) is listed on

I've just tried upgrading to cwrsync 2.1.0 (Rsync version 3.0.0 protocol version 30) between 2 Windows XP Pro sp2 machine across the Internet. I used: SET CYGWIN=nontsec SET HOME=c:\cwrsync\bin C:\cwrsync\bin\rsync -za -u -P --delete --recursive /cygdrive/c/test2/ stuart@test.address.co.uk::test/ When I run the above batch script on the remote machine I get this odd output.

Yes this is another connection reset issue but all I am asking is some pointers on how I can possibly determine what and why this is happening. Its easy to say its a network issue but the bosses and clients want to know how to fix this said "network issue." I have read the rsync issues list. Some of what is suggested we might try HOWEVER we cannot duplicate the errors that occur and

I have a WD Elements 2TB USB hard drive. I would like to encrypt the whole drive with TrueCrypt on my CentOS box. Could someone direct me to a tutorial on how to do this? Ideally, I would also like to access it with my WinXP box, but this part is optional. Thanks for your help. Mike.

Hi, Whenever I issue this commands (as in the help for the threshold function), # # Do a 1D decomposition # tdecomp <- wd(test.data) # # Threshold it # tdecomp.thresh <- threshold(tdecomp) # # Reconstruct from the thresholded coefficients # trecons <- wr(tdecomp.thresh) # #

Sc847 36 drive config. Wd RE3 1tb drives. Areca and lsi hba. 3 or so drives would completely hang under any kind of decent load. Replaced with lsi 1068 and chenbro sas espanders and replaced the supermicro backplane with the -A version (direct port) and its been riPping along for well over a year. We replaced the 3gb backplane 2x and exact same failures. Supermicro refuses to concede a problem

ood morning, I am reaching out to discus an issue I am having with setting a working directing. I have tried github, stack overload, setwd, getwd, all to no avail. I am used to setting a working directory in 3.1.1 and have yet to get 3.4.1 to work properly. Let me know if there is anyone who I can talk to about this. Thank you so much, My best, Peter Wight, MPA [[alternative HTML version

Hi, I'm puzzled by an ASUS P5GC-MX/1333 with a WD320AAJS disk. My 5.2 DVD refused to see the hard disk. As the CD happened to have a bad MD5 sum, I assumed this was due to a bad burnt image. Backed off to 5.1. Installation of 5.1 to /dev/sda went OK, then I upgraded by yum to 5.2. But, at the next boot, the new kernel can't see the disk. Only when BIOS IDE Setup is "compatible"

On 03/01/2016 09:53 AM, Emmanuel Noobadmin wrote: > > Since I'm likely to use Reds again, it is a bit of a concern. So > wondering if I just happen to get an unlucky batch, or is there some > incompatibility between the Reds and the Intel C236 chipset, or > between Red / C236 / Centos 7 combo or the unlikely chance WD has > decided to do something with the firmware to make

> However, the latest C7 server I built, ran into problems with them on > on a Intel C236 board (SuperMicro X11SSH) with tons of "ata bus error > write fpdma queued". Googling on it threw up old suggestions to limit > SATA link speed to 1.5Gbps using libata.force boot options and/or > noncq. Lowering the link speed helped to reduce the frequency of the > errors (from

On 3/1/2016 9:53 AM, Emmanuel Noobadmin wrote: > However, the latest C7 server I built, ran into problems with them on > on a Intel C236 board (SuperMicro X11SSH) with tons of "ata bus error > write fpdma queued". Googling on it threw up old suggestions to limit > SATA link speed to 1.5Gbps using libata.force boot options and/or > noncq. Lowering the link speed helped to

Emmanuel Noobadmin wrote: > Might be slightly OT as it isn't necessarily a CentOS related issue. > > I've been using WD Reds as mdraid components which worked pretty well > for non-IOPS intensive workloads. > > However, the latest C7 server I built, ran into problems with them on > on a Intel C236 board (SuperMicro X11SSH) with tons of "ata bus error > write

Hi there, I have found a bunch of sites explaining how to mount the WD mybook World Edition 2 via samba. Fine and Dandy - I've been able to mount the drive. I still am unable to write from the ubuntu server to the drive mounted via samba. What are some things I can check here? here is my /var/oxsemi/shares.inc the usernames have been stripped # cat shares.inc [Music]

Dear all, I have experiencing some speed issues recently when moving files using Samba between a linux box (Kubuntu 10.10) and a media player called WD TV Live. Both are wired to a 100 Mb network, together with a Windows 7 box. In principle I believe is not a hardware issue. When I move files between the WD TV Live and the Windows box I get speeds of around 8 MB/s. Between Kubuntu and WDTV I get

I see a really good price, and better for quantity, for 3TB drives. Now, I've been down on WD for a couple of years, since I found that they'd protected certain h/d parms from being changed (like TLER). The ones I'm looking at are the Red, which seems to be a new color (at least to me), and one technical review I've read says that they're intended for NAS, etc, and you can