similar to: rsync: connection unexpectedly closed

Quoting a mail from Richard van Beers: >Im trying to use rsync to sync about 23GB over a local LAN. >I use 2.5.6 compiled on SCO OpenServer 5.0.6, this is the command I use: > >rsync --verbose --stats --recursive --times --perms --links --delete >eurux02::user2 > >(I have tried it with and without --compress, as the archive hinted this >may be a problem with -z, but same

Hi list, I am still having troubles with rsync, as on large areas in our setup, it keeps dying unexpectedly. See my previous post two days ago for the initial tries. I realize it is a somewhat broad question, but how do I troubleshoot these disconnects? Im no great programmer, although we have a few good c programmers around, and if needed I can ask for their help. But for now, my thinking is,

Hello, I am getting low on space in my /(root) partition. I have 23GB free. I have 350GB in my /home partition. I am the only user. I was experimenting with virtualization and it causes the root partition to get very low. I would like to move /var from the root partition, to the same partition as /home, if that's safe to do. Or, resize /home and add another partition for /var I also

On 25/09/16 18:03, Robert Nichols wrote: > On 09/25/2016 11:47 AM, TE Dukes wrote: >> Hello, >> >> I am getting low on space in my /(root) partition. I have 23GB free. >> >> I have 350GB in my /home partition. I am the only user. >> >> I was experimenting with virtualization and it causes the root >> partition to >> get very low. I would

I am clearly doing something ridiculously wrong. Running Asterisk 0.7.2 on FreeBSD 5.1, I have SIP soft phones which are unable to register. They keep trying and then time out. With the sip debug on in Asterisk nothing is logged. Here is the trace from one of the phones (kphone): (192.168.100.13 is kphone, 192.168.100.3 is Asterisk) sipclient: sending: 21:47:45.454

Believe me, I have tried everytbing I can think of to solve this problem. I will work my tail off to resolve this but I am fresh out of ideas. Any suggestions would be GREATLY appreciated. Here are the details... problem: server can see machines/shares on clients but clients cannot see machines/shares on server workgroup/domain: golgerth no router server: rpms: kernel 2.4.18.19.8.0

-------- Original Message -------- Subject: Re: [LARTC] DNAT rule for vsftp (PASSIVE FTP) Date: Fri, 05 Oct 2007 12:17:42 +0530 From: Mohan Sundaram <smohan@vsnl.com> Reply-To: smohan@vsnl.com To: Indunil Jayasooriya <indunil75@gmail.com> References: <7ed6b0aa0710042251u6442fb85ma74e46aa9d3f81f9@mail.gmail.com> Indunil Jayasooriya wrote: > Hi all, > > I want to run

Hi, I would like to know if somebody can point me out how to configure several DomUs in a private LAN (for example 192.168.100.0/24) and one DomU with two interfaces (one - 192.168.100.0/24 and two - internet). So far I have enabled in xend-config.sxp: (network-script network-route) (vif-script vif-route) My config files have: /mnt/VM/1.cfg:vif = [''ip=192.168.1.3'']

Hi all, I want to run vsftp behind a firewall.(i.e DMZ zone) . It is runnig as passive ftp. the theroy behind passive ftp is , - FTP server's port 21 from anywhere ( Client initiates connection) - FTP server's port 21 to ports > 1024 (Server responds to client's control port) - FTP server's ports > 1024 from anywhere (Client initiates data connection to

Hi, I have an DNAT ISSUE with PREROUTING. This is my setup. I have 2 firewalls running iptables. Pls asume 1.2.3.4/29 is the internet interace of FIRST firewall. 2.3.4.5/29 is the internet interface of SECOND firewall. it has DMZ zone. in that DMZ zone, mail server runnig @ 192.168.100.3 Now I want to DNAT port 25 of FISRT firewall (i.e - its ip address - 1.2.3.4/29) to the internet ip

Hi all, I want to run vsftp behind a firewall.(i.e DMZ zone) . It is runnig as passive ftp. the theroy behind passive ftp is , - FTP server''s port 21 from anywhere (Client initiates connection) - FTP server''s port 21 to ports > 1024 (Server responds to client''s control port) - FTP server''s ports > 1024 from anywhere (Client initiates data

Hi List, I am running into a problem where I have 2 interfaces bridged with and ip address assigned. I have another interface in which traffic has ingress traffic that needs to go out the bridged interface. I am trying unsuccessfully to SNAT the traffic leaving the bridge interface to its assigned address. # brctl show xbrdg0 bridge name bridge id STP enabled interfaces

I have problems installing the latest release of Samba on Caldera (SCO) Openserver 5.0.6 I have downloaded the source and ran "./configure" fine. I get an error " line 664: Syntax error " when I run "make". If I run " ./configure --with-winbind", then run "make", I get the error "Compiling smbd/server.c include/includes.h, line 885:error:

Hi, I have an DNAT ISSUE with PREROUTING. This is my setup. I have 2 firewalls running iptables. Pls asume 1.2.3.4/29 is the internet interace of FIRST firewall. 2.3.4.5/29 is the internet interface of SECOND firewall. it has DMZ zone. in that DMZ zone, mail server runnig @ 192.168.100.3 Now I want to DNAT port 25 of FISRT firewall ( i.e - its ip address - 1.2.3.4/29) to the internet ip

Good Morning, I understand you provide support for the Samba project. I am searching for some FREE help solving what I think is a very simple problem for an experience Samba professional. I am running Samba 2.2.12 on an old SCO OpenServer 5.0.6 box. I cannot update to a more recent version of Samba as this is the last version that will run on SCO OpenServer 5.0.6. I have some

Hello, We are trying to compile the samba 2.2.0-alpha3 source on a SCO Openserver 5.0.6 server. we ran configure with standard options no visible problems. On running make we get the following error ..... Compiling tdb/spinlock.c Compiling tdb/tdbutil.c Compiling printing/printing.c Compiling printing/nt_printing.c Compiling smbd/noquotas.c Compiling smbd/oplock.c Compiling smbd/oplock_irix.c

Hi All, I've been having issues getting X forwarding to work on OpenServer for OpenSSH versions 3.4p1 and 3.5p1. I have compiled OpenSSH on Redhat Linux 8.0, Solaris 8, and OpenServer 5.0.6, but the OpenServer box is the only one that exhibits the problem. I've detailed everything below. I am using PuTTY for my ssh client under Windows. If I connect to the Linux or Solaris boxes, X

Hi Ernest, I''m cc''ing the win32utils-devel mailing list in case anyone has any ideas. --- Ernest Ellingson <erne at powernav.com> wrote: > Daniel Berger wrote: > > >Hi Ernest, > > > >Me again. I just realized that it''s just a bug in > my > >documentation (duh). You can pass arguments to the > >Service.start method.

If you upgrade to sco 5.0.7, you get samba 3.0.20 5.0.6 had samba 3.0.14. so im wondering why your using samba 2.2.. samba 3.0x. is on the supplimental discs. Gr. Louis >-----Oorspronkelijk bericht----- >Van: dave at anchor-tech.co.uk >[mailto:samba-bounces at lists.samba.org] Namens David Nolan >Verzonden: vrijdag 22 mei 2015 14:12 >Aan: 'Mauricio Tavares' >CC:

Hi All, I compiled the 3.2.3p1 source on SCO OpenServer 5.0.6. When a client connects to it now, they get stair-stepping everywhere. Issuing an stty sane resolves the issue for that login. For bug 245 in 3.2.2p1, the call to setsid() is sshd.c was bypassed due to problems it was causing with Solaris. However, by allowing this method to be called, the stair-stepping goes away. Thanks, Greg