similar to: My motherboard/cpu/memory seems to hang when rsync runs...?

I've read man ssh and man ssh-keygen and some howtos and still am not getting what I expect. I can do ssh john at 192.168.15.3 and login with a password OK. I want to be able to do that with keys in preparation for running rsync with keys, so I created a key on router1, the machine I want to ssh from. routem at router1:~/.ssh$ lla total 20 drwx------ 2 routem routem 4096 2009-03-08 09:55 .

found that rsync 2.50 packaged as openPKG rsync-2.5.0-1.0.1.src.rpm had this problem when compiled with redhat gcc 2.96 ---------- Forwarded Message ---------- Subject: rsync backup hangs at boot Date: Mon, 20 May 2002 12:10:55 -0500 From: John Griessen <john_g@cibolo.com> To: <rsync@lists.samba.org> rsync seems to work fine copying from the running system. Files match as far

Hi all, I've installed Asterisk on Linux Red Had 9. Now, I was trying to set up a GUI based system for the PBX. I downloaded some packages, but I have to have Perl running CGI scripts through the webserver. It does not allow me to. I am able to run a basic script that just just prints out html messages and nothing else. However, when I try to run am-main.pl or config.pl or any other

Hey everybody, I've been trying to compile wine since version 1.0 and have gotten crashes during the make command, about 20 minutes in. Very frustrating. I'm running Fedora 9, and I believe gcc version 4.3.0.8. Is this a gcc problem? If so, what can I do to fix it? Output of failed make command follows... gcc -c -I. -I. -I../../../include -I../../../include -D_REENTRANT -fPIC -Wall

I'd like to hear from anyone using coreos to run a container with tinc for purpose of connecting containers. Sounds almost like a chicken/egg problem:-) I'm thinking of running a container with alpine linux and tinc installed there. John Griessen

Hello everybody, today I had some time to test Peter´s decoding plugin on a very slow machine. My setup: - Pentium "classic" @ 50 MHz (underclocked!) - Mainboard with Mercury Chipset (I think) - CD-ROM and HDD in PIO-Mode (CPU intensive) - MAD16 Soundcard (ISA slot, CPU intensive) - Win95B, Winamp 2.76, Decoder Plugin 1.16 (RC 2) The hardware setup is something like the

I updated my home server with the 6.4 CR packages, and I've experienced 3 or 4 hard lockups since. The server is a fanless VIA C7 "CentaurHauls" system with a 1GHz CPU underclocked to 800MHz and 1GB of RAM. It has a dual-port Intel 82546GB NIC in its single PCI slot. (It also has an on-board Realtek RTL-8110SC/8169SC NIC that is plugged in, but doesn't currently have an IP

On 01/28/2015 03:30 PM, Frank Cox wrote: > ... > Having never used DisplayPort before, I'm wondering if this means that > if I purchase the BenQ monitor above, or something similar, I can then > reasonably expect to plug it in and have it just-work with my Centos 7 > setup. > I like the full-size DisplayPort connector the best of any video connector I've dealt with,

I've not really dug into testing tinc yet, but if you all will humor me in an uneducated blast of questions, I'd appreciate it. What can you do to keep tinc going if your high availability comes from cluster nodes being dispensable? Can tinc run on the cluster nodes? That seems like chicken/egg problem though to get tinc server installed and cluster nodes brought up... If tinc needs to be

Let's try this from scratch: I've been having a problem for the past several days with a shellscript that has been working without problems for the 11 months. It's working until the comes up with the following error: total: matches=349 tag_hits=4061 false_alarms=1 data=6628073 ERROR: file corruption in public_html/reports/analog/analog.conf. File changed during transfer?

How well do you think asterisk could run on a miniITX board like the ones linked below with the call volume of say a small doctors office or something? http://www.mini-box.com/s.nl/sc.8/category.15/.f - Mark -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061229/638e4426/attachment.htm

Hello folks Anyone know if this would be enough to decode oggs? AMD Elan SC520 133 MHz If not, what seems to be the lower limit required for decoding oggs? Many thanks, Kerry. <p>--- >8 ---- List archives: http://www.xiph.org/archives/ Ogg project homepage: http://www.xiph.org/ogg/ To unsubscribe from this list, send a message to 'vorbis-request@xiph.org' containing only

Since my current monitor appears to be slowly dying, I'm looking for a replacement. I generally use hardware replacement as an excuse to get something bigger/better/faster than what I had before, so I'm currently considering something like a BenQ GW2765HT. The manual for my Intel motherboard has this to say about DisplayPort on the built-in graphics controller: QUOTE: DisplayPort?s

Hi, I have just upgraded my computer to Intel Core i5-4430 Quad Core @ 3.0 GHz (supports VT-d), ASRock B85M Pro4 micro-ATX LGA1150 motherboard (supports VT-d), 8 GB Kingston DDR3-1600 memory and Cooler Master Elite 311 ATX casing (all for SGD$501). I made my computer upgrade on Independence Day 4th July 2013. I have also flashed the UEFI BIOS of ASRock B85M Pro4 motherboard to version 1.50.

I have been reading asterisks and everything I can get my hands on for the past week. I want to know what class processor is the bare minimum I need for a four port Asterisk installation? Thanks

I have this server I need to put to work. The option I have is to make it work as a small office PBX with SIP users and a Digium E1 Card for PSTN service. 24 SIP users and one E1 card in an Intel 945board (533 Front side bus) with 1GB DDR 533mhz of ram, one Pentium Dual Core 2.66 ghz (FSB 533MHZ) and two 80GB SATA disks. Can the box sustain the load? I can add another 1gb of ram if necessary.

Hello, I have been working on VGA-passthrough in the last month. When Xen was at his version 3.5 there was a few patches to make this work for some graphic cards using the patches developed by Han Weidong and posted here (http://lists.xensource.com/archives/html/xen-devel/2009-08/msg01176.html) and the same patches posted file by file are here

Hello, I have been working on VGA-passthrough in the last month. When Xen was at his version 3.5 there was a few patches to make this work for some graphic cards using the patches developed by Han Weidong and posted here (http://lists.xensource.com/archives/html/xen-devel/2009-08/msg01176.html) and the same patches posted file by file are here

Hello list. I'm trying to rebuild the 2.6.9.67.0.20.EL kernel, but it fails even without modifications. How did I try it? Created a (non-root) build environment (not a mock ) Installed the kernel.scr.rpm and did a rpmbuild -ba --target=`uname -m` kernel-2.6.spec 2> prep-err.log | tee prep-out.log The build failed at the end: Processing files: kernel-xenU-devel-2.6.9-67.0.20.EL Checking

rsync seems to work fine copying from the running system. Files match as far as a random check. I've been hoping to simplify life by rsyncing from the running system to have a bootable backup. Most conversations on the list suggest this is easy, and I've gotten it to happen, and now I've forgotten to do some detail.... ( /etc/fstab is corrected to refer to the device