similar to: redirect a ringing phone

I am using asterisk 1.8.3. I am getting this error: [Mar 15 09:49:12] NOTICE[1049]: chan_sip.c:21358 handle_request_invite: Call from 'mndemo_to_vizioconfrm104' to extension '1104' rejected because extension not found in context 'smvoice-mediaport'. "dialplan show" gives me that the context is present: [ Context 'smvoice-mediaport' created by

I am using asterisk 1.4.21 with outgoing call files. I am call a line that is busy as you can see below. How can my AGI ask what the status of the last call was so I can tell if there was NO ANSWER or it was BUSY? Thanks, Jerry -- Attempting call on SIP/401 for smvoice_callprogress at smvoice-dialout:1 (Retry 1) -- Got SIP response 486 "Busy" back from 192.168.1.161

Under 1.4.35 I get this message printed MANY times [May 3 21:41:21] WARNING[21567] chan_sip.c: Asked to transmit frame type 4, while native formats is 0x1000 (g722)(4096) read/write = 0x1000 (g722)(4096)/0x1000 (g722)(4096) [May 3 21:41:21] WARNING[21567] chan_sip.c: Asked to transmit frame type 4, while native formats is 0x1000 (g722)(4096) read/write = 0x1000 (g722)(4096)/0x1000

Hi all, I have setup my Cisco 79XX phone. Did the tftp, put the config files in the right location with the right names. Booted my phone, it does the tftp things, the screen shows my extensions everything seems fine. However, when I come offhook and try to dial 11 which is just a playback of demo-congrats in the dialplan the phone says Calling Out (INV) below is my sip.conf file - I presume it

I am calling from a polycom phone into asterisk ( 1105 ) on a PC with a speaker attached. When asterisk first starts this works. In fact it works for some time. Then it just stops with this error on the CLI. [Apr 4 15:10:21] NOTICE[4357]: chan_sip.c:21358 handle_request_invite: Call from 'mndemo_to_mediaport105' to extension '1105' rejected because extension not found in

Some progress to report: I had to run asterisk as the user logged in - actually not even that. I could not "su user -c " to that user - I had to run it as that user. Then I did a test and got audio! Great... But when I do a second test. Asterisk HANGS on ChanIsAvail() Then I thought lets SKIP that - and just let it do the Dial() - I stopped everything - got it running again. - and

I am running 1.4.22. I am doing a simple call into the dialplan and am getting a strange error: [Nov 3 08:32:27] NOTICE[8022]: chan_sip.c:14316 handle_request_invite: Failed to authenticate user "404" <sip:404 at 192.168.1.8>;tag=547521CB-DB0D6130 This is the only line that prints on the console... Typically I get a few lines like: -- Executing [33 at smvoice-sip:1]

I am using asterisk 1.4.41 and the AMI I am trying to execute a command over AMI, specifically "core show channels concise" "sometimes" I get this back: asterisk_command_show_channels() execute failed. 'Response: Follows[CR ][LF ]Privilege: Command[CR ][LF ]OutgoingSpoolFailed!smvoice-dialout!failed!1!Down!AGI!smvoice|-digium_failed!!!3!0!(None)[LF ]' I'm not

Here is the CS1000 log. Again, the CS1000 using SIP accepts incoming calls just fine. However, using outgoing call files the CS1000 is hanging up after I answer the call. I dont know why? Thanks, for any assistance. Jerry my sip.conf entry is: [Nortel] type=friend dtmfmode=rfc2833 username=XXXXXXXXX disallow=all allow=ulaw allow=alaw

hi All, I am using 11.25.2 and musing on hold. CentOS 7.4 I am trying to setup a MusicOnHold() streaming audio. I have one machine I tried this on and it worked. This machine is on the internet. I have another machine behind a firewall that does not play. Both machines installed mpg123. I have a windows machine behind the firewall that plays the audio stream so firewall is not the issue. I

hi I am getting this error: -- Executing [50 at smvoice-sip:1] Answer("SIP/440-0856dd70", "") in new stack -- Executing [50 at smvoice-sip:2] rtsp("SIP/440-0856dd70", "rtsp://192.168.1.175/img/video.sav") in new stack [Apr 30 11:22:48] WARNING[8031]: app_rtsp.c:1037 rtsp_play: >rtsp play [Apr 30 11:22:48] NOTICE[8031]: rtp.c:1287 ast_rtp_read:

I am running asterisk 1.4.26.1 and using ALSA not oss dahdi 2.2.0 and libpri-1.4.10 I am calling into console/dsp I hear the audio just fine then after the hangup I hear ringing on the console/dsp. Why would that be? I found this bug for OSS https://issues.asterisk.org/view.php?id=13686 Does the same thing exist in ALSA??? some traces below Jerry == Parsing

-- Attempting call on DAHDI/1wwwwww for smvoice_callprogress at smvoice-dialout:1 (Retry 1) [Oct 16 14:36:42] WARNING[16408]: chan_dahdi.c:8132 dahdi_request: Unknown option 'w' in '1wwwwww' [Oct 16 14:36:43] WARNING[16408]: chan_dahdi.c:1481 dahdi_enable_ec: Unable to enable echo cancellation on channel 1 (No such device) Does DAHDI not know about the W ??? I think zaptel used

I have a box running asterisk 1.4.17 that had been working. it has 2 uniden phones connected on it. This was working and now the phones dont ring when calling each other. below is the sip debug. I cant see why the other phone does not ring? I also tried changing the canreinvite for no to yes but that made no difference after restarting. Very simple network. server, linksys router and 2 phones.

I have a small system, server, client and 2 phones. Phones are polycom 501's. In general all is working fine. I can call the two phones, speak etc... I can have the server call each phone and play a wave file. However, when trying to setup a direct dial number of 1044 that calls another machine running asterisk - something ODD is happening. ; This is not working.... [smvoice-sip] exten

I have a USB to serial converter attached to my box. pl2303: Prolific PL2303 USB to serial adaptor driver if I login to the box and send/receive serial commands over this unit it works without error EVERY time. however, if I run the same command set from with-in the extensions.conf with System() I get errors in dmesg like "pl2303 ttyUSB0: pl2303_open - failed submitting read urb, error

I am getting this error from call manager (4.0) and asterisk 1.2.4 I have canreinvite=yes on the call manager setup. I can call into the asterisk box from call manager. THat seems to work. When I am calling out of the box using a call file I see this entry from call manager... What might be the problem with my setup? THanks, JErry ---------------- <Date>03/06/2006

I am upgrading a box from 1.4 to 1.6 and my console/dsp stopped working. I am getting a SIP/401 Unauthorized error and then a SIP/404 error. I changed nothing in the configs. Is there a particular parameter needed for 1.6 that 1.4 did not care about? If I drop back to 1.4 it starts working again. Thanks Jerry

I am using asterisk 13.33.0 and POlycom phone with the latest firmware. The polycom phone is behind a firewall, the server is in the cloud. If the polycom has just booted - it receives a call, after some time (couple minutes) it no longer receives a ring. I see no errors in the CLI - looks just like the previous call as far as I can tell. Then reboot the phone and as soon as its ready call it

ok switching to "Console/default" does show the text --- <("<) --- Call to device 'default' on console from 'default' <2564286000> --- (>")> --- --- <("<) --- Auto-answered --- (>")> --- However I don't hear any audio. Thanks Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL: