similar to: Possible typo in syslinux.txt doc

does the IPAPPEND option still exist? If so I want clearification on it please. Out of the syslinux documentation it says the following. The flag_val is an OR of the following options: 1: indicates that an option of the following format should be generated and added to the kernel command line: ip=client-ip:boot-server-ip:gw-ip:netmask ... based on the input from the DHCP/BOOTP or PXE boot

Signed-off-by: Ferenc Wagner <Ferenc Wagner wferi at niif.hu> --- doc/syslinux.txt | 9 ++++----- 1 files changed, 4 insertions(+), 5 deletions(-) diff --git a/doc/syslinux.txt b/doc/syslinux.txt index 76cae24..0ec2695 100644 --- a/doc/syslinux.txt +++ b/doc/syslinux.txt @@ -163,11 +163,10 @@ IPAPPEND flag_val [PXELINUX only] ... based on the input from the DHCP/BOOTP or PXE boot

Syslinux 4.01 is a bug fix release for 4.00, but also includes the new experimental lua interpreter, as well as the ifplop module. Changes in 4.01: * ISOLINUX: fix initialization on systems which don't zero low memory. * SYSLINUX/EXTLINUX: fix handing of disk read retries in EDD mode. * ISOLINUX: change the initialization sequence to avoid

Thanks for that Jason but it didn't solve the problem. The system is still coming up with the interfaces shuffled. It seems to *always* want to use the added ethernet card as eth0. On Wed, Feb 25, 2015 at 1:37 PM, Jason Warr <jason at warr.net> wrote: > Starting back in RHEL/Cent 5 I found that the only way to make sure your > interface enumeration was consistent after install

Hello Using pxelinux for so long time i don't want to use pxegrub to PXE boot solaris 10 on x86 . So i would like to use pxelinux to do this jobs . I use ipappend and mboot.c32 however i don't success to have the kernel argument appended with BOOTIF : here is what i use : LABEL solaris MENU DEFAULT MENU LABEL Solaris Jumpstart KERNEL mboot.c32 APPEND multiboot kernel/unix

Ok, so some of this now works, but I'm still having problems. With the bootif option, the system now correctly configures and uses the same interface to get its kickstart file. However, when the system is done and boots up, the interfaces are still messed up. So this is what I have in the kickstart file: # On-Board Port 1 with public IP configuration network --noipv6 --onboot yes --bootproto

folks, Im finding that using a config like this: SERIAL 0 19200 #IPAPPEND 2 PROMPT 1 TIMEOUT 100 IMPLICIT 0 APPEND console=ttyS0,19200n81 root=/dev/nfs nfsaddrs=10.10.10.100:10.10.10.2:10.10.10.2:255.255.255.0:soekris:eth0 nfsroot=10.10.10.2:/nfshost/truck panic=15 LABEL deb268 KERNEL vmlinuz-2.6.8-1-386 initrd=initrd.img-2.6.8-1-386 panic=10 LABEL deb268-ram KERNEL vmlinuz-2.6.8-1-386

Fix some typos in the documentation. Signed-off-by: Sebastian Herbszt <herbszt at gmx.de> diff --git a/doc/comboot.txt b/doc/comboot.txt index f5fefda..b3d8e64 100644 --- a/doc/comboot.txt +++ b/doc/comboot.txt @@ -553,7 +553,8 @@ AX=000Fh [3.00] Get IPAPPEND strings [PXELINUX] AX=0010h [3.00] Resolve hostname [PXELINUX] - Input: ES:BX pointer to null-terminated hostname + Input: AX

I'm using ipappend and getargs.com with a dos boot image to get the environment variables for the IP and MAC. The format of the %ip% environment variable is ip=<client-ip>:<boot-server-ip>:<gw-ip>:<netmask> Is there a way to tell ipappend to assign these to individual arguments. Or does anyone know a good way to parse each of these to individual variables in dos. What

Hi Folks, I'm trying to install Debian onto a headless server (Supermicro X8SIE-LN4F motherboard). The on-board IPMI BMC redirects the serial port to COM3, and I can talk to it just fine over a remote console connection. I've been trying to install Debian remotely, and have the DHCP and TFTP servers working, and things seem to work (at least into the Splash screen) if I'm using

Hello, I'm having trouble PXE booting the Xen hypervisor kernel as follows: PXELINUX 3.31 0x4518b206 Copyright (C) 1994-2005 H. Peter Anvin UNDI data segment at: 00094FC0 UNDI data segment size: 4A30 UNDI code segment at: 000999F0 UNDI code segment size: 44E4 PXE entry point found (we hope) at 999F:00D6 My IP address seems to be 0A000063 10.0.0.99

Starting back in RHEL/Cent 5 I found that the only way to make sure your interface enumeration was consistent after install with what you had during install was to create a udev rules file using the mac addresses as the key. It is easy to run a short script in postinstall to create it based on how anaconda has seen them. In order for this to work on Cent 6 you have to set biosdevname=0

Ok, when I run that, it creates a now "custom" 70-persistent-net.rules, but the interfaces are still out of order, with the added one listed first, and the built-ins 2nd and 3rd. On Wed, Feb 25, 2015 at 2:00 PM, Jason Warr <jason at warr.net> wrote: > Here is my script for post install if you want to try it. > > In order for the shuffling to not occur you do need to

<overly trimmed> On 02/25/2015 01:56 PM, Ashley M. Kirchner wrote: > Ok, so some of this now works, but I'm still having problems. With the > bootif option, the system now correctly configures and uses the same > interface to get its kickstart file. However, when the system is done and > boots up, the interfaces are still messed up. So this is what I have in the >

On Wed, Dec 11, 2013 at 9:22 PM, ?? <kun.he at cs2c.com.cn> wrote: > When we meet UEFI or EFI firmware, lots of linux os release use > GRUB bootloader. But I wanna use isolinux to boot the installation > environment and also the linux os installed. Some question puzzled me. Now, > I look for your help: > > 1. I didn't found information about how to use >

Out of order meaning, it puts the additional ethernet card as eth0, with the built-in ports as eth1 and eth2 respectively. WITHOUT the additional card installed, it puts the built-in ports as eth0 and eth1, which is what I want it to do. The additional card should be eth2, at least that's what I want it to do. Looking at persistent-net.rules, it always puts the additional card first, both

Version 6.6 ... On Wed, Feb 25, 2015 at 1:17 PM, Jim Perrin <jperrin at centos.org> wrote: > <overly trimmed> > > On 02/25/2015 01:56 PM, Ashley M. Kirchner wrote: > > Ok, so some of this now works, but I'm still having problems. With the > > bootif option, the system now correctly configures and uses the same > > interface to get its kickstart file.

Hi, We currently use pxelinux and tftp-hpa for pxe booting new machines and installing our OS of choice. This has worked great for the past year, and just about every HP laptop we've tried so far has worked flawlessy, until now...? We recently bought a bunch of HP ProBook 6570b laptops but couldn't get them to work with our pxelinux setup. What we see is that the 6570b stops at the

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 23/02/15 08:16 PM, Steven Tardy wrote: > >> On Feb 23, 2015, at 6:34 PM, Ashley M. Kirchner >> <ashley at pcraft.com> wrote: >> >> I have a Dell server that has two built-in ethernet devices. When >> I kickstart the machine, they are correctly identified as eth0 >> and eth1 (correctly meaning they

changing i386 COMMAND_LINE_SIZE to 1024 attached is a simplistic fix to change kernel's command-line size from 256 to 1024, tomatch capability in syslinux 3.08. It seems to work. Is this all there is to it ? One of the reasons I did this was to figure out what extra options are appearing, and why. b4 extending: (the last bit is truncated) Jun 4 06:31:05 truck kernel: Kernel command