similar to: can't up the eth in the vm and access to network

Hi, I meet with the problem that "Error: unable to connect to '/var/run/libvirt/libvirt-sock' ". I do as Error: unable to connect to '/var/run/libvirt/libvirt-sock' <http://wiki.libvirt.org/page/FAQ#Error:_unable_to_connect_to_.27.2Fvar.2Frun.2Flibvirt.2Flibvirt-sock.27>said but never worked: root at shahe26:~# virsh error: unable to connect to

On Tue, Mar 01, 2016 at 04:31:13AM -0600, md at rpzdesign.com wrote: > Where do I get information about the details of not needing a tinc-up script > anymore? (/etc/network/interfaces) You can just use the normal /etc/network/interfaces way of configuring the interface, like this: iface vpn inet manual address 192.168.1.1 netmask 255.255.255.0 tinc-net <netname> > Also,

Gus: Can you give me an example of <netname>. My eth0 device is assigned a public ip address, but I will not use tinc to secure traffic over that interface. There will be an eth1 device that has a externally visible IP Address. It is on this eth1 device that I want the virtual tun0 device to route its traffic. Maybe under Ubuntu, I will have a different device name tun0? (I only

Package: xen Version: 4.3.0-3+b1 When trying to migrate from a 4.3 host to a 4.1 host (which should fail of course, but gracefully), the PV guest on the sending host crashes. To be honest, I have no idea which component to file this bug against. The sending host has been upgraded to jessie. Here're the relevant package versions: ii libxen-4.3 4.3.0-3+b1

Hello, I''ve got several kernel panic on a domU under network activity (multiple rsync using rsh). I didn''t manage to reproduce it manually, but it happened 5times during the last month. Each time, it is the same kernel trace. I am using Debian 5.0.8 with kernel/hypervisor : ii linux-image-2.6.32-bpo.5-amd64 2.6.32-30~bpo50+1 Linux 2.6.32 for 64-bit PCs ii

Hello, I''ve got several kernel panic on a domU under network activity (multiple rsync using rsh). I didn''t manage to reproduce it manually, but it happened 5times during the last month. Each time, it is the same kernel trace. I am using Debian 5.0.8 with kernel/hypervisor : ii linux-image-2.6.32-bpo.5-amd64 2.6.32-30~bpo50+1 Linux 2.6.32 for 64-bit PCs ii

Hi all I need to use three 512 kbps aDSL internet connections, in a load-sharing, link-failover scenario. Presently I am using Ipcop with a single DSL. Now, I seem to have two options...one..an Edimax quad wan port adsl router, with firewalling and NAT and second install a minimal linux distro for routing...something on the lines of LARTC....and keep NATTING, IDS & Firewalling on the linux

Hello.. I have a big problem and It seems I can''t solve it.. Scenario: Linux server , 2 eths (one for Lan (eth0), one for Internet (eth1)). I use NAT for LAN clients.. The internet eth is linked into a switch , along with 6 sdsl modems.. (256 kbit each link - most probably an htb on the other side).. So , I made 6 aliases to my eth1 with ip''s for the DSL connections ..

Hi, I wanna do some shaping on a DSL line that is plugged to the eth1 nic. Should I attach the qdiscs directly to the ppp device or can I use the eth1 device instead? What (and why) makes more sense? thx cb _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

I need to add eth0:1 with a new IP address to my C5-based router. Does a design document exist for the ifcfg family of scripts that explains how they're to be used? Before I go digging through the script hierarchy I'm hoping someone can point me to documentation to make the process easier. One confusing issue is that the ifcfg-eth* files in /etc/sysconfig/network-scripts are

Hi honorable people! In self-education purposes only, I would like to ask is 35 Mbytes/sec bandwidth limitation of SMB/CIFS in Gigabit applications? I've try read large file (45GB) from server to client's dev/nul and don't get bandwidth greater than specified... But, using FTP or NFS I get REAL stable read speed at 80 MB/sec! Same picture in synthetic TCP tests. Why while SMB in

hi friends, I have met some problem in the configuration of xen domain U network. I have two physical network cards. eth0 is connected with the outworld and using a dhcp assignment. eth1 is connected wth the local network and i set the ip as 192.168.0.100 I create a Sarge domainU. And i went into the sarge /etc/network/interfaces, modify it as 192.168.0.10 I am

Summer Internship at ETH Zurich "Dynamic Portfolio Asset Allocation" We offer a 3-months internship starting midth July 2008. The topic addresses "Dynamic Portfolio Asset Allocation" including alternative instruments and hedge funds. The goal will be to compare the robust mean-variance, the lower partial moment and the conditional value-at-risk approaches for portfolio

Hi, after a lot of head scratching I found that the ifup-eth script in the initscripts package seems to be corrupt. I filed a bug with the details here: http://bugs.centos.org/view.php?id=5333 Given the nature of the corruption you might be not affected at all, see strange error messages or end up with networking problems on Centos 5.7 depending on what you configuration looks like. I just

Hi, in the official XenNetworking ( http://wiki.xensource.com/xenwiki/XenNetworking ) i didn''t find reported how the NAT configuration works with xen. Does anybody know how the vifX.Y (10.X.X.128), gateway of any domU ethX (10.X.X.1) talk with the real ethX of the dom0? Thanks Enrico _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

Say, I''ve found a fairly reproducible error: If you have ethernet aliases, when you first start xend (I use /etc/init.d/xend start) your brige fails to initialize properly. However on the exact same build/hardware/server removing the aliases produced a solid server for both domain0 and domain1 I tried to fix the bridge with "brctl addif xen-br0 eth0" and that would work, but

The big Swiss University network provider has been having severe problems for about 8 hours now --- particularly the cross-atlantic connection seems broken --- Many of you will get R-help or ESS-help E-mails very much delayed. Hope things start working soon by themselves. [for those that are disrupted: When you get this message, things should be back to normal; otherwise you wouldn't have

The au1000-eth driver contains none of the manual cache synchronization required for using DMA_ATTR_NON_CONSISTENT. From what I can tell it can be used on both dma coherent and non-coherent DMA platforms, but I suspect it has been buggy on the non-coherent platforms all along. Signed-off-by: Christoph Hellwig <hch at lst.de> --- drivers/net/ethernet/amd/au1000_eth.c | 15 ++++++---------

Hello, I am using eth0 as my xen management interface. There will no VM connected to the interface. I read a lot of articule about adding a interface and create a new bridge. Some add a ip address to the new interface some don't. Do I really need a IP on all interfaces ? Tx

Hi all, i am using a laptop for my work. When i need to go to some customers I need to change my tcp/ip configuration every time (phisical interface and wirelss interface). Most of them do not have a dhcpd server on their networks, and i need to this changes by hand. For this pourpose i make some scripts to do this changes automatically. All works ok, But i have problems with