similar to: Windows Vista Client Fails to Connect to Ubuntu libvirtd

Having newly compiled a Libvirt on a Windows Vista machine (many thanks to Matthias Bolte) I have attempted to connect to a remote Ubuntu machine using virsh.exe. However, the connection fails as follows: $ virsh -c qemu+tcp:///system error: unable to connect to libvirtd at 'localhost': errno=10061 error: failed to connect to the hypervisor 1. I have modified

Hi! Having two hosts installed with libvirtd, kvm, qemu on (Ubuntu 10.10). Now I have one big problem and one less: I have set up kerberos for both hosts. Created the principal "libvirt/srv1.example.org at EXAMPLE.ORG" and "libvirt/srv2.example.org at EXAMPLE.ORG", Exported the krb5.keytab, Installed it and tested the servers: srv1.example.org: I can connect using kerberos

Does a comprehensive set of instructions on how to compile Libvirt on a Microsoft Vista platform exist? Has this ever been accomplished? I would very much appreciate input from persons who can give me confidence that a Windows client application can be developed on top of Libviet that connects to a QEMU system on an Ubuntu server. The Libvirt Windows Support page

Migration without --p2p works just fine, ie. the below works: $ virsh migrate --verbose --copy-storage-all \ --live cvm1 qemu+ssh://kashyapc@devstack3/system Migration: [100 %] Result: - On the source host, the guest is shut off - On the destination host, the guest is live migratied successfully Migration with "--p2p" fails, a simple test below:

Hello! I was investigating libvirt a year ago regarding it's remote control. I figured out necessary settings for configuring remote control in ubuntu (setting flags in libvirt setting files). Now I have several questions: 1) Are these flags the same for Centos? They did not worked for me. My flags for ubuntu are (for tcp for example): /etc/libvirt/libvirtd.conf : listen_tls = 0, listen_tcp

Hi guys, I am trying to analyze libvirt rpc protocol by wireshark. But I found wireshark doesn't dissect libvirt packets. Here are my environments operations: 1. Environments: My system: Debian GNU/Linux buster/sid with *kernel-4.15.0-1-amd64* Packages installed: *libvirt0-4.1.0-2-amd64 libvirt-wireshark-4.1.0-2-amd64 wireshark-2.4.5-1-amd64* 2. Libvirt configurations

Hi All, I am trying to build libvirt from source, the compilation went fine and I see that various libvirt tools are being generated, but when I try to use the generated virsh with qemu and ssh (example virsh qemu+ssh://uri/system) I am not able to login and it fails with the following error: error: failed to connect to the hypervisor error: End of file while reading data: : Input/output error

Hey guys, I have a private network and I trust it! /me hides behind trees... So, in order to exercise my trust, I wanna migrate guests over TCP; with and without shared storage. This is: - I want to migrate from host1 to host2; which have shared storage; over TCP without certs - I want to migrate from host1 to host99, which don't have shared storage, over TCP without certs I am asking

Hi, I can''t seem to get libvirtd to accept remote connections. Both systems are built using genunix''s b130. It seems that connections originating from the xvm0 server itself are fine but as soon as I go on to the other box and run the same python script (or simply virsh) the connection gets dropped immediately. Telnetting to port 16509 confirms that it drops the connection

On Fri, Apr 03, 2015 at 10:13:38AM +0200, Kashyap Chamarthy wrote: > On Fri, Apr 03, 2015 at 10:08:21AM +0200, Kashyap Chamarthy wrote: > > Migration without --p2p works just fine, ie. the below works: > > > > > > $ virsh migrate --verbose --copy-storage-all \ > > --live cvm1 qemu+ssh://kashyapc@devstack3/system > > Migration: [100 %] >

I set the me into the group libvirt and write the config for libvirtd: ================================================== listen_tls = 0 listen_tcp = 0 auth_tcp = "none" mdns_adv = 0 unix_sock_group = "libvirt" unix_sock_ro_perms = "0770" unix_sock_rw_perms = "0770" unix_sock_dir = "/var/run/libvirt" log_filters = "1:libvirt 1:util

Hello, I've recently configured a new virtual machine host running Ubuntu 12.04 server with libvirt and KVM. I am configuring WebVirtMgr ( https://github.com/retspen/webvirtmgr/ ) for users to manage machines via a web interface. This requires access to the host using qemu+tcp, which I have configured as follows: /etc/default/libvirt-bin: start_libvirtd="yes"

Hi, Libvirtd is in listen mode. /etc/libvirt/libvirtd.conf listen_tls = 0 listen_tcp = 1 auth_tcp = "sasl" my trying to setup polkit authentication using http://wiki.libvirt.org/page/SSHPolicyKitSetup [root at aopcach ~]# cat /etc/polkit-1/localauthority/50-local.d/50-org.arindam-libvirt-remote-access.pkla [Remote libvirt SSH access] Identity=unix-user:arindam

Hi? All: I have two physical machines as KVM hosts (clusterA.RHCS and clusterB.RHCS) , an iscsi target set into GFS. All I want is a HA Cluster which could migrate all the virtual machines on a node to another when the first node failed into some error status. So I created a cluster "cluster" using RHCS ,added the two hosts into the cluster . created a fence device . for every virtual

Hi, I am trying to migrate a running instance, but it fails with the following error: $ virsh migrate --live instance-00000008 qemu+tcp://10.2.3.150/system --verbose error: operation failed: migration job: unexpectedly failed I can see following in the instance specific qemu log directory (/var/log/libvirt/qemu/instance-00000008.log) on the destination host: 2012-04-12 03:57:26.211: starting up

Hello everyone, We have recently turned up a new T1 from McLeod (Midwestern CLEC). It is configured like so: /etc/zaptel.conf: loadzone=us defaultzone=us span=1,0,0,esf,b8zs ;(also tried 1,1,0,esf,b8zs) bchan=13-23 nethdlc=1-12 dchan=24 /etc/zapata.conf: switchtype=national context=pri-in signalling=pri_cpe group=1 channel => 13-23 I can get hdlc0 (and pvc0) up just fine after the

Hello, I'm trying to install and use libvirt 1.0.4 on an Ubuntu 12.04.2. I compiled libvirt by doing: $ ./configure --with-selinux=no --with-gnutls $ make $ sudo make install Everything works fine and are installed under /usr/local Then I started the libvirtd manually and try to start a linux container that has the following configuration: $ virsh -c lxc:/// dumpxml lxcvm1 <domain

I have the following set up: schedule {nightly: period => daily, range => "18 - 23", repeat => 1 } define deadlypkg { tag("package") $pkgrepo="/staging/PRODUCTION/deadly" package{"$name": source => "$pkgrepo/$name.pkg", ensure => latest, adminfile

I''m following the example provided in the type reference under ''zone'', i.e.: zone{myzone: autoboot=>true, create_args=>"-b", ip=>"nge0:10:130.55.201", path=>"/zoneds/%s", realhostname=>"myzone.example.com",

Thanks Milind, Yes I?m hanging out for CentOS?s Storage / Gluster SIG to release the packages for 3.12.1, I can see the packages were built a week ago but they?re still not on the repo :( -- Sam > On 18 Sep 2017, at 9:57 pm, Milind Changire <mchangir at redhat.com> wrote: > > Sam, > You might want to give glusterfs-3.12.1 a try instead. > > > >> On Fri, Sep