similar to: printer doesn't work under wine

Hey guys, This is Jesse Cox (KI4JGT) I'm writing you guys today because I'm having trouble figuring out what has been going on with a programming IDE I frequent on Windows. It's ran on every version of WINE I've installed for the last 3 years. Since the upgrade of Ubuntu 11.04, WINE no longer offers the ability to run this program (JustBASIC - http://www.justbasic.com) I was

I've successfully installed and configured (well except the printing portion...read on) wine20030408 and am running Notes 5.0.8 on it. Everything works fine except I cannot get it to print. When I launch the File --> Print... the print window pops open and states "No printer currently selected." I cannot select any printer either. The two network printers that I use daily are

Hi there, I have a problem with the rpc driver stuff: I have copied the driver files to //atlas/print$/W32X86 and WIN40 (via filesystem copy), added and set the driver without errors. But getdriver reports no driver associatet with the printer?! So reports below. I am sure, this was working on this system. I tried to reinit the ntprinters.tdb, printing.tdb, nt_forms.tdb and ntdrivers.tdb by

Hi I have a RH7.2 server with 3 x LPT ports I have installed the following printers using the GUI printconfig Lp0 = HP1200 Lp1 = OKI320 Lp2 = OKI321 I have shared them via samba I can browse them using WinXP & Win2K by browsing the Linux box, looking at the printers and double clicking to open them, all is OK you would say, No. I have checked permissions on the /var/lpd directories and

I have a problem installing a printer shared to windows. When I go to properties on the printer I have shared I get Function address 0x606407fe caused a protection fault. (exception code 0xc0000005) Some or all property pages may not be displayed. Using HP Inkjet 1200 samba-3.0.20b edited mime.conv and mime.types and uncomented lines application/octet-stream application/vnd.cups-raw

hi all Subject: 1) Samba server 3.0.15 with one shared sesource Security is set to SHARE, all guest users have full read/write access to the share 2) Microsoft network clients is Windows 98, Windows 2000 and Windows XP (sp2) 3) Old-age DOS program, written on Clipper (xBase), what runs on Windows 98 and on Windows XP/2k (ntvdm) 4) Large multi-user database (dbf files) on samba server

I just upgrdaded to FreeBSD 5.2 CURRENT and installed samba 3.0.3pre2. I have copied /etc/printcap and samba config from the previous installtion (FreeBSD 4.8 and samba 2.x) Now, i cannot print anything from windows xp (i only have windows xps, so i cannot tell if it works from other windows but i guess it does not). When i printed the data is sent to the printer and no error shows up on

I've a problem with a program. Printing system does: type test.txt *>>* \\lnxsrv\printer and it return: "the parameter is incorrect" but if i try: type test.txt *> *\\lnxsrv\printer it works but if i try with early samba before 3.0.21 release "open extend >> " works ! with last samba release 3.0.25 not work and it tell me error ! Only simple >

Hi List, (PS: I am not signed to list, please CC a mail to rajesh_ghanekar@yahoo.com ). I am using samba 3.0.1 as a primary domain controller with LDAP. I am able to do file sharing very well with user wise restriction. The problem is with printer. I have a HP1200 printer for which i have to do JOB accounting. All the jobs will be queued through samba. I have done setup so that the

Hi. I start to manage small network with about twenty workstation. There is an old DELL with Novell 3 as file server and spooler for four printers. Clients (Win98 and WinXP) runs dos applications written in clipper and foxpro. Everything works fine, but... :) I want to migrate file server and spooler in to new server with RHEL5. Cups works fine, but Samba not. DOS apps randomly hangs or freeze for

Suse Ver. 7.3 profesional Samba Ver. 2.2.1a Windows PC printer Setting smbprint_LS filter in the /etc/printcap file, to print on a printer connected to Windows PC (which is ok on other Linux Slackware and RADHAT versions), no sistem error is generated but the printer don't works and we receive, in /var/mail/root, the following mail: subserver pid 5687 starting at

----- Original Message ----- From: zefiro To: samba@lists.samba.org Sent: Tuesday, September 03, 2002 5:50 PM Subject: printcap file Suse Ver. 7.3 profesional Samba Ver. 2.2.1a Windows PC printer Setting smbprint_LS filter in the /etc/printcap file, to print on a printer connected to Windows PC (which is ok on other Linux Slackware and RADHAT versions), no sistem error is generated but

The Bordeaux Technology Group released Bordeaux 1.8.2 (http://bordeauxgroup.com/store/bordeaux-software) for Linux today. Bordeaux 1.8.2 adds support for Apple's QuickTime 6.5.2 Player, IrfanView 4.25 the extreamly popular image viewer and editor. This release aslo bundles in Cabextract, Wget and Unzip to remove external dependencies. Our winetricks script has been synced to the latest

I'm stuck. I have Samba running on my Red Hat 7.2 Linux box. I can mount by remote dirctory on the Linux box via Samba. But I can't print to the Linux printer. I have a Linux printer installed and I can print to it using lpr. I have a printer configured in Samba and can see that from the Win98SE box. I've clicked on the Samba printer name and configured a Win98 printer.

Hello everyone, I upgraded my Samba server on my RHL 7.2 box from 2.2.3a to 2.2.7. Almost immediately afterwards, all of my admin users suddenly were unable to access the printers that were being shared by Samba. Any idea of what is wrong and how to fix it? The messages I'm getting are that I do not have enough rights. I am using a Windows 2000 Server PDC and a lot of Windows XP Pro, and

I installed Samba 2.2.2 on my Linux box. The smb.conf file is as shown below. The permission on /var/spool/lpd/lp is set to 755; ie, it is writable only by the owner, which is lp. With the setup as is, when I try to print from the NT machine, the smb log on the Linux box indicates the following error: " print_job_start: insufficient permissions to open spool file /var/spool/lpd/lp". If

Hello All. Anyone know what the cause of this error is in Centos 4? $ system-config-printer Traceback (most recent call last): File "/usr/sbin/system-config-printer", line 9, in ? import queueTree File "/usr/share/printconf/util/queueTree.py", line 1236, in ? queueTree() File "/usr/share/printconf/util/queueTree.py", line 138, in __init__ if

> I have problem with finding my printerjobbs in sambas printer queue, > I do se the jobb while it is in /var/spool/samba, but not when the job > has been spooled to LPRngs spool. > > smb.conf > [Global] > printing = lprng > lpq command = /usr/server/LPRng-3.8.21/bin/lpq -P%p > print command = /usr/server/LPRng-3.8.21/bin/lpr -b -P%p <%s ;rm %s > > The

I've had this problem as long as I've been using samba: every time anyone prints from a PC they get a banner page labeling them 'nobody.' Now, I realize this has to do with the guest account being 'nobody,' and the server is passing that name to the printer. It can get very frustrating, though, when lots of folks use the same printer and all of the jobs have the same name

Hello all! The situation: [PIPPIN,linux] <---> [TOM,printer] | | [GANDALF,win95] >From gandalf, I 'see' the printer, I can configure it, etc. Even I can print, but the printer no prints :'-( More info: /etc/printcap lp|impresora|tom: \ :sd=/var/spool/lpd/lp: \ :mx#0: \ :sh: \ :lp=/dev/lp1 /etc/smb.conf [global] printing=bsd