similar to: Office 2007, wine-1.3.10, CentOS 5.5

Este listado de antibióticos lo tengo en una tabla csv CON DETERMINADAS MEDICIONES CUANTITATIVAS POR AñOS Ampicillin Oxacillin Peniclina Ciprofloxacina Amikacina Gentamicina Kanamicina Ceftriaxone Ceftazidima Cefotaxima Cefazolina Cefuroxima Aztreonam Cloranfenicol Vancomicina Eritromicina Clindamicina Fosfomicina Amoxicilina Imipenem Azitromicina

Hi all, I''m trying to marking packets with iptables and use tc filter to catch this packets. I configure my device: tc qdisc del root dev eth0 tc qdisc add dev eth0 root handle 1: htb default 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 3000kbit ceil 6000kbit burst 15k tc class add dev eth0 parent 1:1 classid 1:10 htb rate 2000kbit ceil 4000kbit burst 15k tc qdisc add dev eth0

There''s a lot new in 1.3.10: 1) You may now define the contents of a zone dynamically with the "shorewall add" and "shorewall delete" commands. These commands are expected to be used primarily within FreeS/Wan updown scripts. 2) Shorewall can now do MAC verification on ethernet segments. You can specify the set of allowed MAC addresses on the segment and you can

I wondered why my changes to wineconfig suddenly reappeared! When I change wine config and apply & close it, no error appears. But next time I start winecfg, my changes weren't saved! E.g. removing application entries. The console just show: Code: $ winecfg fixme:ole:CoInitializeSecurity (0x42f660,-1,(nil),(nil),4,3,(nil),0,(nil)) - stub! fixme:advapi:RegisterTraceGuidsW (0x100778a,

Changes with nginx 1.3.10 25 Dec 2012 *) Change: domain names specified in configuration file are now resolved to IPv6 addresses as well as IPv4 ones. *) Change: now if the "include" directive with mask is used on Unix systems, included files are sorted in alphabetical order. *) Change: the "add_header"

Hi, I've posted this in Gentoo forum as well but always happy to get a second opinion; http://forums.gentoo.org/viewtopic-p-6525852.html#6525852 and here's the copy'n'paste for this forum; All, I think I may have a bug but wanted to get a second opinion first; Basically, whenever I try and play a game that requires direct3d it crashes with Code: wine: Unhandled page fault on

Hi folks. Does anybody managed to get Skype 5.0 going on Wine 1.3.10? THX Cheers

Hi! Wine 1.3.10 here, on Ubuntu 10.04 64 bit. After maybe a week or two since last time (no probs back then), today I launched again FullTiltPoker: no way to connect to Full Tilt game server. When it comes to the connection, the Windows executable tells me: Trying again... Trying again... Trying again... ... Launching the executable with WINEDEBUG="warn+all", at the same time I get

Hi, there! I'm new to this forum. I have installed Debian Squeeze and Wine 1.3.10. I need edit videos sometimes because of my job. I don't like Windows, and it is a real problem if you seek professional output. Sony Vegas(since 5.0) requires .NET framework. You know, dotnet doesn't work really good under Wine. I had another choice, and installed Sonic Foundry Vegas 4.0, that

Hello, I don`t know if any of you encountered this problem but i really need some opinions! I am using Ubuntu 10.10. This is how it goes. I have a little program for accounting and i need to send at each month`s end some declarations, the program installs fine but one function of the program does not work ( the one i need ) with the next error: You haven`t got the date setup ' Short date

> First, src/vsnprintf.[ch] where not added to cvs, version checked out > off CVS does not build. You're right. I forgot to cvs add them. They are now in the repository. > Second, src/main.c *still* does not build on Linux 2.4.x based systems - > it is necessary to #include <sys/resource.h> somewhere. I could have sworn that I have the 2.4 headers installed on this

From: "Brendan Cully" <brendan@icecast.org> > On Tuesday, 10 July 2001 at 01:26, Nick Ludlam wrote: > > Not got to the bottom of it yet, but commenting out both LOG_INFO > > lines in thread/thread.c stops it segfaulting. Now I'm back to the old problem > > of a 128k stream not being sent fast enough to the clients. > > you should just be able to

From: "Brendan Cully" <brendan@icecast.org> > On Tuesday, 10 July 2001 at 03:21, Nick Ludlam wrote: > > From: "Brendan Cully" <brendan@icecast.org> > > > That handles the segfault, I don't know why the stream wouldn't be > > > sent fast enough though... > > > > Tried with winamp, sonique and freeamp. All exhibit the

From: "Brendan Cully" <brendan@icecast.org> > On Tuesday, 10 July 2001 at 14:10, Nick Ludlam wrote: > > From: "Brendan Cully" <brendan@icecast.org> > > > On Tuesday, 10 July 2001 at 03:21, Nick Ludlam wrote: > > > > From: "Brendan Cully" <brendan@icecast.org> > > > > > That handles the segfault, I

What are the hardware reqs for v 1.3.10 and newer on Linux RH 7.1? Thank you, Roman. --- >8 ---- List archives: http://www.xiph.org/archives/ icecast project homepage: http://www.icecast.org/ To unsubscribe from this list, send a message to 'icecast-request@xiph.org' containing only the word 'unsubscribe' in the body. No subject is needed. Unsubscribe messages sent to the

On Wednesday, 11 July 2001 at 21:51, Nick Ludlam wrote: > Hurray! I found the problem, and it lies with icecast. If I set sleep_ratio > to 0, I get no problems with icecast reading data from the socket. I spent > a while working out that after a certain length of time, ices started falling over > when the thread reading the socket in icecast wasn't waking up in time > so send()

On Thursday, 12 July 2001 at 01:25, Nick Ludlam wrote: > From: "Brendan Cully" <brendan@icecast.org> > > I've got a change which still uses sleep but in much smaller > > increments, sitting in the icecast CVS tree (this was to help with > > streaming high bitrate streams). Try that out and see if it works for > > you. > > > > I did play

I'm having problems with this combination. I thought it was problems with Ices but I'm not so sure... I start Icecast and Ices and send them to the background. Usually about 10-12 hours later, they are dead. The icecast.log file shows this: [25/Mar/2001:16:09:41] [0:Main Thread] ERROR: Could not create new thread, retrying [25/Mar/2001:16:09:41] [0:Main Thread] ERROR: Could not create

Not got to the bottom of it yet, but commenting out both LOG_INFO lines in thread/thread.c stops it segfaulting. Now I'm back to the old problem of a 128k stream not being sent fast enough to the clients. Nick ----- Original Message ----- From: "Nick Ludlam" <nick@ivision.co.uk> To: <icecast@xiph.org> Sent: Monday, July 09, 2001 8:54 PM Subject: [icecast] Problem with

hivex-1.3.10 does not pass the sles11sp3 post-build-checks anymore, 1.3.8 was still ok. The relevant output is: ... [ 57s] Hivex.xs: In function 'XS_Win__Hivex_node_name': [ 57s] Hivex.xs:236: warning: implicit declaration of function 'newSVpvn_utf8' [ 57s] Hivex.xs:236: warning: assignment makes pointer from integer without a cast [ 57s] Hivex.xs: In function