similar to: Install driver for USB programming cable

I am trying to use software to program a scanner radio (BCD396t and UASD software). The software installs and seems to run properly, reading and writing database files. But I cannot connect to the scanner, through a USB-to-serial cable. OS: ubuntu-8.10, kubuntu-8.10, debian/lenny (tried them all) lsusb identifies the cable as follows: Bus 002 Device 002: ID 067b:2303 Prolific Technology, Inc.

doctordruidphd wrote: > I am trying to use software to program a scanner radio (BCD396t and UASD software). The software installs and seems to run properly, reading and writing database files. But I cannot connect to the scanner, through a USB-to-serial cable. > OS: ubuntu-8.10, kubuntu-8.10, debian/lenny (tried them all) > > lsusb identifies the cable as follows: > Bus 002 Device

Is there a cable length limit to use with a fxsmod (TDM400B) ? I noticed that if I use a very long cable 148 feet, I can hear some parasite : I hear the radio ! If I use a short cable, there is no problem... Thanks for help, St?phane HENRY

I read many postings in this listserv about cable modem under RHL 7.3 in Sept 2002, I followed the recommendations, but I still can't get it to work. I have 3 computers connected to an Ethernet hub/router in my house, and the uplink from the hub/router goes to a Scientific-Atlanta Webstar cable modem. The 2 Windows computers are successfully using the cable modem to connect to the

Actually, I know where it is... I managed to download Adobe Digital Editions, and it appears to have installed properly. By that I mean that I can run the program. It is currently to be found in /home/wine/drive_c/programfiles/adobe/adobedigitaleditions/digitaleditions.exe When I click on this the program runs, which is good. But how do I get it to show up in my application list under Wine, or

Hello, I am curious if the below setup makes any sense... If I have two public IP addresses served off of a cable modem, can I send one to a shorewall box in bridge mode, then have the other serve my network? Physically, I would like to run it: Cable Modem -> Shorewall Box -> Router -> Network Possible? I would like to do this using FC 4. thanks

Hi Guys! I would like use my ups with ub 77 usb to serial cable, because I don't have enough serial port. After the revision 2431 liebert(gtx2 /esp-2) drivers have bugs and I use rev2431 driver (liebertgtx2). It doesn't work with this cable. The Liebert App(Multilink) works with this cable. Do you have any idea ? Thanks your help. -- Best Regards, Robert -------------- next part

Hi, I live in a rural community where adsl and cable is not widely available. I correctly have an option of using adsl or cable at my location. Ten miles away my friends apartment building has no option of cable or adsl. I set-up a wireless link between my friends apartment building and my house. It works great for him and me and the adsl company doesn''t care because they

I'm not talking about menu items. I know that menus are not stored in wine related folders. The problem, as I've mentioned above is that when try to install visual studio 2005 it finds some prerequisites already installed (like .net 2.0 or windows installer 3.1) and stop the install with the message that another (trial) version of this product (VisualC2005) is already installed and must

I have an MGE Ellipse Premium 1200 that I connected to my server using its USB cable. Nut seems to be working fine. I've done a power down test and it worked and came back up when the UPS had power again. I'm using the newhidups driver and the USB cable. The problem I'm having is that if I boot with the cable connected newhidups says it can't find the UPS. If I unplug and plug in

Hi all I installed *wine 9.6 on fedora4, IE6* , and *APPs* for *CALC TI83 plus * i tried to use the *USB *cable to connect to the *CALC* but did`t work then i used *serial cable* after i make *? ln -s /dev/ttyS0 ~/dosdevices/com1? *then i run the "TI Connect APPs" to coonect to the *CALC *it finds the *COM1* when it tried connect to the* CALC* but connection filed. any one

Hello, first of all, let me say sorry, for my ugly english ! In the past, I used DVDFab 7/8 with wine 1.2 on Kubuntu 10.04. Everything worked fine, without any special configuration. I used the Blu-Ray to Blu-Ray Function. Now, i did a new installation of Kubuntu 10.10, and DVDFab looks like this: DVDFAB 7.0.9.3 [Image: http://img225.imageshack.us/img225/1065/dvdfab7093.png ] DVDFab 8.0.7.3

Hi everyone, This is not directly NUT related, but i don't know where else I can still ask this. I have been using a pretty decent 2nd hand MGE ellipse premium 1200VA for a while now at home. http://www.mgeups.com/download/doc_intl/ small/premium/389uk.pdf It's been working very well for me on linux, but my linux server has recently passed away and now I only have Macs left.

A friend and I were recently talking about the possible downfall of Internet radio, and as everyone seems to these days, decided that a nice solution would be to set up a P2P broadcasting solution. However, streaming has a completely different set of requirements than file sharing, with bandwidth and QOS become much larger issues. As such, we started to realize that a new audio compression scheme

I have an installation where we're replacing a rather old Linux box with a new one that has no parallel ports. The old box has two parallel ports going to Okidata printers. The IOGEAR GUC1284B USB to Parallel Adapter cable looks like it might be a simple solution to this, but I would like to know that it works before getting a couple. Comments? Bill -- INTERNET: bill at celestial.com

I've just acquired a Unitek ALPHA 1200 Sx UPS to replace an older serial UPS that's been working well with NUT for years. Could anyone with a Unitek tell me what the pinout on the 10P10C plug is so I can make up a cable? Thanks.

Ever since the RCs and the release of 1.2, I have been having trouble with directx based games not working properly. They did work under wine-1.1.3x. The problems are: video very slow and jerky, about 1 fps, objects appearing as "tears" on the screen, missing some textures, and screen going blank during certain effects. System: 64-bit kubuntu-10.04, dual NVIDIA 9800GT w/ 512 mb, plenty

Hello all, Has anyone had any luck getting a CPS GS 1500U working with NUT via USB. Its branded Geek Squad (don't ask) but it shows up in the USB device list as the CPS 1500U. I'm running Kubuntu Dapper with all current updates installed, Kernel 2.6.15-26-686, NUT 2.0.3. I've tried hidups and newhidups. With hidups I used port=/dev/bus/usb/001/004 which I'm sure is the UPS

> > No you didn't do what I showed you to do. Hallo Vitamin, yes you are right, I didn't install riched20 right, but know I have done it. The fonts at the login mask appears and we can successful login. But if we open a list page (company's list, invoice's list), Topix still breaks down. Here's the terminal's journal... If you could have a look at it, can you

Any one know of software that allows 2-way radios as VoIP(SIP) clients, besides dingotel's usb & mic cable trick ? http://www.dingotel.com/2way/requirements2way.asp They might be ok if the SIP client was not hardcode to their own SIP proxy Has anyone tried any hacks to get the 2-way radio SIP client to regsiter to a * box. hmm chan_frsgmfrs anyone? using the usb/mic cable under linux :)