similar to: CPU usage at 100% in all Wine programs

Hi I''m not too sure how best to explain this but here goes! I am trying to write an appointment system. I have, through example, just about got the dynamics correct. Even tried to play with some table joins (and excuse me if I''ve used the incorrect terminlogy). But no matter what I try I can''t seem to get the following code to work. I have a cart filled with Treatment

Hey guys. I'm very new to Wine. Very. I've pretty much just installed it. I'm using Ubuntu 10.04 and upon seeing many videos on Youtube such as "Team Fortress 2 On Wine!", seeing it run flawlessly, and I thought I'd give it a go. Now, I'm using the Dell Studio 1555, which has pretty awful graphics. It is a laptop after all. I managed however, with a few mods I could

This ain't funny anymore. On my notebook with ati xpress 1250 onboard graphics running Windows XP, the latest version of winetest (corresponding to wine 1.1.41) crashes after some timeout in the d3d9 tests, which leads to a hard reboot. On my intel945 desktop there's just some timeout. While I understand, that this X1250 chip is not really decent hardware and not supported anymore by Ati

One sort of questions why a company the size of Oracle, working with DARPA funding, wouldn't have the resources to design the virtual machine they required for the project... although reading the article they never do *quite* say that Fortress is being put down... just that the research group is winding down on it, the JVM target work isn't going to be completed, and the current

I thought this would be of interest to LLVM developers: The Fortress project, which was an attempt to create a very advanced language with implicit parallelism, parametric polymorphic types and many other cutting edge language features, has announced that they are winding down the project. What I found very interesting was that one of the reasons they gave was the lack of a suitable execution

[As posted as Ubuntu Question #184284 on Launchpad] Hi, I try to set up nut (2.4.3) on my Lucid (10.04.3 LTS) to make use of my old but very trusty UPS (Best Power Fortress 660 LI). Yes, this UPS is old (about 16 years), but with its third battery pack last week it is as good as new. It runs perfectly well with Windows XP, Vista and even Windows 7. But not so with Ubuntu and nut. After

I am running Arch linux on my laptop and I installed wine a while back to check if one application I use would work with it or not. Well I couldnt get it running since it apparently uses MS .NET framework which doesnt seem to work very well with wine. But to the issue at hand. Today I decided to try off another application, well okay a game actually, and I ran winecfg as normal user to re-make

Hi, I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box. *Its not detected.* Details are as below :- [root at asterisk ~]# lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI

I came across a problem after updating to 0.9.59 and it appears to have continued to 0.9.60. I started with gutsy, ATI 9600 with the fglrx drivers, direct rendering working as with the games i wanted (CNC3, Champ Man...) in 0.9.58 however on upgrading to .9.59 software installs and winecfg both display properly, However on running the games i get a fuzzy display a bit like a tv half tuned in to

Hi, I have A101DE Sangoma Card( http://www.sangoma.com/products/hardware_products/digital_voice_and_data_networking/a101.html ) lspci shows as 03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card [root at asterisk ~]# lspci -vvv -s 03:04.0 03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card Subsystem: Unknown device

Hey Ive followed the instructions in the AppDB on how to setup team fortress 2, and after i did the preformence in menus improved, how ever i cannot still join any games. After loading completty finnished, just to send of into In-Game mode, it crashes. No error messages and steam freezes... I have Nvidia Geforce 9800GT with driver 190.32 and Wine 1.1.28 (1.1.29 messes up my steam menus) I allso

Ive tried very hard to get Half-Life to run on my Linux box...and I have finally managed to get it to work...the problem (the BIG problem) was that I was trying to use an installed version of windows as the basis of wine. It worked fine with most programs...but not Half-Life and some other games... My recommendation is that you dont use a preinstalled version of windows as the basis of a wine

Okay, so awhile back I had a problem with Steam. It wouldn't start and so I fixed that after installing a minimal version of winetricks (I removed a few things I knew I wouldn't need). Then Steam worked. Unfortunately I then had a problem with Team Fortress 2. This time the game wouldn't load. So I read the AppDB for Team Fortress 2 again and it said to disable Steam Community

Hello, I'm trying to run Team Fortress 2 on Linux using Wine 1.0. I tried starting the game from Steam, but it shows the loading TF2 window, then closes and never starts the game. I know the game isn't supposed to run on Linux, but I have a question about gameinfo.txt. I tried starting hl2.exe in: /.wine/drive_c/Program Files/steam/steamapps\*user*\team fortress 2 folder, but it said I

Hi! I have managed to get games like Team Fortress 2 and Mirror's Edge to finally run. But only with really bad performance. If I run glxinfo | grep direct in the terminal, I get: Code: direct rendering: No (LIBGL_ALWAYS_INDIRECT set) However, if I run sudo glxinfo | grep direct, it outputs this: Code: direct rendering: Yes I'm not sure if that is relevant, but it seems a bit odd.

I can install other hl2 mods and they show up in my games list and run fine, however whenever I install fortress forever it doesn't show up. I've even tried the shortcut that installs from the setup. But when I run that it just says loading source sdk base and nothing happens. There is no useful terminal output either. This is on wine 1.1.19. Help would be very much appreciated.

Firts of all Greetings From Cuba "Saludos" to all of the member of this list. My name it's Orestes Leal, at your service. Well, The problem it's the following: I have one ATI RADEON 200 Series Integrated into the mainboard (ATI Technologies Inc RC410 [Radeon Xpress 200]), the chip has 64 megs of Video and 64 shared from memory to a total amount of 128 megs, the Xorg says me

I cannot seem to get a L'abbe plot to work on R. I do not understand what the X coordinates, or alternatively an object of class metabin, is supposed to mean. What is a class of metabin? Institute of Behavioral Genetics University of Colorado, Boulder Whitney.Melroy at Colorado.EDU

I could not make the bestfortress driver 0.02 work for my Best Fortress LI675VA, so I have made a patch for the driver. The reason was, that all responses are preceded and terminated by CR LF, but the driver would discard everything after the first CR LF. The following patch discards everything up to the first LF. It also adds a debugging feature of displaying the accepted data (level 5 i.e. -D

I'm rather new to Ubuntu and thus WINE and I'm just about to buy new parts for my computer (it's kind of broken as of this moment). When I read through the FAQ in the wiki I noticed something in section 9.3, "If you're running a graphics-heavy application using a video card with very poor drivers such as an ATI card under Linux, performance will degrade substantially.".