similar to: Re: BlueTooth Headset

I am able to pickup, hangup, and flash, using the buttons on the phone with all of the soft clients and both of the headsets I mentioned below. I don't believe I had to change anything on the client side, just had to get the ctp (cordless telephone profile) working in the bluetooth stack, which was a pita. I struggled with the same issue...I could use the headset, but that's not very handy

Hi, You need to have completely replaced the Microsoft driver, because it doesn't support the headset or ctp Bluetooth profiles. This gave me fits! I followed the instructions at http://www.windowsdevcenter.com/pub/a/windows/2005/07/05/bluetooth.html and it works with both a Plantronics and a Motorola Headset, and I can answer calls with idefisk, eyebeam, x-lite, and kapanga. If you end

Hello Forum/List, usually sound works quite well for me in WINE, but now trying to get my BlueTooth headphone to work (as opposed to the laptop's builtin speakers) I've run into a problem. My guess is it has to do with the delay occurs when a sound begins to play over these headphones, even though watching a movie in MPlayer at the same time to prevent that delay hasn't helped either.

Hi *, is anybody using a bluetooth headset with some success?? If yes, which stuff is used (usb dongle and BT headset)? (I would like to : 1. be able to receive calls, if possible to answer acalls with the headset. 2. be able to place call, but this seem lot more difficult.) Laurent

Has anyone managed to use a bluetooth headset or phone with their install of Asterisk? What I had in mind was either have a headset paired with the server and use that to answer/make calls in some way, or forward the calls to my mobile via bluetooth if that's possible. -- -S

There are somes products available claiming to connect a BT headset, a cell phone and a phone land line all together. I've found some : http://www.geekzone.co.nz/content.asp?contentid=2079 http://www.clipcomm.co.kr/ The clipcomm BS-A101 sample price is : $570. It's VoIP land phone that can make/receive a voice call using your CTP cell phone or BT-enabled headset. Maybe the best system

Tom - here are a few suggestions Plantronics 510SL Bluetooth - they make a bundle that comes with a Bluetooth transceiver and a handset lifter. This is nice if you have users that already have Bluetooth headsets for their mobile phones, as it allows you to sync with their office phone as well. http://www.plantronics.com/north_america/en_US/products/cat29880043/cat2 9880054/prod5460016

Jerry Geis wrote: >/ Has anyone played with usb bluetooth devices on centos? />/ I am trying to pair a kensington usb bluetooth device with />/ a motorola bluetooth headset and get it to work with a />/ softphone. />/ />/ I am not finding how to pair the two devices? />/ / >I would be interested in hearing about any solutions as well. I have >the same USB bluetooth

All Any body know of a generic bluetooth adpater for the universal 2.5mm headset jack on a cell phone that supports the wireless profile *NOT* the headset profile I know jabra has the A210 http://www.jabra.com/JabraCMS/NA/EN/MainMenu/Products/Accessories/JabraA210/ JabraA210 but it only support the headset profile .. I am trying to shoe horn my current braindead cell into DocknTalk

Hello everyone. I recently boght a Nokia BH900 headset and USB bluetooth dongle and I'd like to use them to make calls from a sofphone. I managed to this with boxe XTen-Lite and the Zoiper - but they both see the device as a simple sound card through the BlueSoleil drivers. While this is allmost usable, the headphone seems to be kept in "transmission" mode all the time and I get

I didn't change it. I just had a heckofa time getting it to load. Unfortunately, I neglected to document the process, since this was on my home PC and I wasn't planning on replicating it. If I can find some time, I'll see if I can recreate the process. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of

Even better you can set your firefly softphone to auto answer so that you don't even need to be near the pc to answer. Cheers, Dean -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Linn Boyd Sent: Friday, March 04, 2005 2:12 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

IRC channel chatter says that there are some new developments with a cool presence trick that Mark has come up with for bluetooth devices. I know a bit about it, but I think the general population here would like to see some details if they're available. Mark - care to give the list a rundown on the topic? In addition, are there plans for a bluetooth channel driver? The Jabra headset is

Hello, I start trying to use a USB dongle and a Bluetooth GSM phone to make GSM call with asterisk using the BLT channel provided by the GSM phone. Unfortunately I get a "Everyone is busy/congested at this time" whenever I try to Dial("IAX2/****@****/2", "BLT/MotorolaLara/3474501***") For sure I make some mistake in the configuration. Unfortunately I don't find

Anyone know if a Sip phone with bluetooth for a wireless headset exists? If so does anyone have any recommendations? Or maybe a Wifi/Sip headset? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060118/fecf2588/attachment.htm

Has anyone played with usb bluetooth devices on centos? I am trying to pair a kensington usb bluetooth device with a motorola bluetooth headset and get it to work with a softphone. I am not finding how to pair the two devices? THanks, Jerry

asterisk-users-request@lists.digium.com is believed to have said: >Bluetooth enabled phones to talk to Bluetooth headsets; I guess there's a >protocol for the phone to talk to any Bluetooth headset, no matter who made >it. This protocol would have to include something to allow voice to pass >from the phone to the headset and vice versa. It might also include >something for

Hi Stefan, > At the moment I'm into the Bleuz mailing list for getting the SCO > feature to work, starting with my laptops BT and my dads Nokia. > > I have now a basic understanding from the RFCOMM layer which delivers > the AT commands, AT works. If I get the basic SCO functions > working with > the test tools, to get the headsetfunction itself into the > pc.

Hi, I am trying to compile ( the small package ) http://bluetooth-alsa.sourforge.net the bluetooth package does not compile on centos 4.2 but does other distros. I do the cvs checkout, ./bootstrap, .configure, make make install. cd kernel, make and I get an error make[1]: Entering directory `/usr/src/kernels/2.6.9-22.0.1.EL-i686' CC [M] /usr/src/btsco-0.41/kernel/btsco.o

I have compiled chan_bluetooth and I have used it many times before... but now I have a problem and I can?t find a solution. I have a bluetooth dongle (MSI) connected to my asterisk and I use a V3 phone to make calls to another cell phones... the thing is that I just get one way audio.. I can hear people from my IAX softphone but they can?t hear me... I don?t know what could be.. anyone had