similar to: Is there a key-combination to close a WINE program?

So far I have tried using 4 programs with WINE so far and I have not been able to get any of them to work right. An Emulator program kept blinking, a small desktop application called "catwalk" also was blinking. It took me a while to get those programs closed because of the blinking. I also tried installing the Windows Version of TrueCrypt. It had an error on install. Files were

I am new to WINE, and Unix-based systems in General. I have up until recently been using Windows XP Home, but after installing Spore, SecuROM was also installed onto Ring 0 of the Kernel and has pretty much fried my computer. Apparently, because of where it installed itself, it interfered with other programs and now I can't get anything to work right. So I switched to Ubuntu 8.10 for 64-bit

I've looked for this information in all the R help sources I could find and found nothing. Is it possible to use some function key to stop the execution of some R command without ending the R session (Windows, R 1.91)? I've several times started functions that for various reasons are not executing properly and it would be nice to stop them without killing the R session. I've been

here''s the output : # tc -s -d class show dev eth0 class cbq 1: root rate 10Mbit cell 8b (bounded,isolated) prio no-transmit/8 weight 10Mbit allot 1514b level 2 ewma 5 avpkt 1000b maxidle 23us Sent 294 bytes 7 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 605 undertime 0 class cbq 1:10 parent 1:1 leaf 10: rate 100Kbit cell 8b prio 1/1 weight 100Kbit allot 1600b

Hi,All I am using iproute2 to manage bandwith for ADSL router.High,medium,low priority are needed for different protocol port on the ADSL's upstream side,as following: LAN --- |ADSL Router|------WAN When there aren't traffic on the specific priority, its bandwidth should be borrowed by other priorities.But it doesn't work.Here is my script: /usr/sbin/tc qdisc del dev nas0 root

Hello, i´ve installed a Suse 8.1 minimal System with iproute 2.4.7 and iptables, Suse default Kernel 2.4.19. When I start the Wondershaper 1.1a Script I get the following Error: CBQ: "allot" is required to set WRR parameters. /home/skripte/./wshaper: line 72: allot: command not found CBQ: "allot" is required to set WRR parameters. /home/skripte/./wshaper: line 78: allot:

The Wine development release 1.1.25 is now available. What's new in this release (see below for details): - A ton of translation updates. - Support for various Unicode file encodings in Notepad. - Improved memory management, especially for OpenGL. - Desktop menus now cleaned up automatically. - Beginnings of a windowscodecs DLL implementation. - Various bug fixes. The source is

Hi all, I have installed 2.4.5 kernel, Debian Potato. my tc script: #!/bin/bash tc qdisc add dev eth1 root handle 20: cbq bandwidth 10Mbit avpkt 1000 echo root tc class add dev eth1 parent 20:0 classid 20:1 cbq bandwidth 10Mbit rate \ 10Mbit allot 1514 weight 1Mbit prio 8 maxburst 20 avpkt 1000 echo class tc class add dev eth1 parent 20:1 classid 20:100 cbq bandwidth 10Mbit rate \ 5Mbit allot

I''ve been following the HOWTO, and reading mailing list discussions about throttling bandwidth, and have had some success, but I just want to tie off some loose ends. Essentially what I am wanting to do is to keep our bandwidth usage below 1megabit, because if we go over we get charged for that traffic. I''ve used some of the examples from the HOWTO to limit our bandwidth, but I

hi all, Iam using the following CBQs to limit the FTP bandwidth pease tell what changes are rquired to make it work.... tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1:0 cbq allot 1514 avpkt 1000 bandwidth 100Mbit tc class add dev eth0 parent 1:0 classid 1:1 cbq allot 1514 bandwidth 100Mbit rate .4Mbit weight .4 prio 2 maxburst 20 cell 8 avpkt 1000 tc class add dev eth0

Hi everyone, This is on a linux box, ingress (eth1) at 100Mb/s and egress (eth0) at 10Mb/s. The purpose is to test CBQ Here is my script ------------------------------------------------------------------- # Root qdisc tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 9Mbit \ avpkt 1000 cell 8 # Classes tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 9Mbit \ rate 5Mbit weight

I prefer to run games that require CDs from image files, since it is faster and protects the life of my CDs. In windows, I would just mount the disc image and I could then play. But using Wine and Ubuntu, it appears to work differently. When installing a Windows CD using WINE under Ubuntu 8.10 64 bit, how should I go about mounting a disc image so it is seen by games running under WINE as a CD?

Ubuntu 13.10 x86_64 up to date on laptop with nVidia GeForce GTX 765M. There were some updates that I applied last week, and ever since I have missing text in some menus and lists. It is especially bad in Claws Mail and LibreOffice Writer. However, text appears correctly; it's just the menus where the text has disappeared. For example, when writing in LO Writer the part of the window where

Dear I have one virtual machine running Windows Server 2003 with 64 for role Domain Controller. A two weeks ago I see by task manager CPU graph is always using 100%, list the process on running are Taskmgr.exe , tcpsvsc.exe lsass.exe and others process . I never see before process like that using a lot CPU . Is possible there is issues between XEN source and Windows Server 2003 ? I did test

I am using a server with asterisk and I am trying to prioritize voip traffick -- I am a newbie at this traffic shaping, so please bear with me. I used the script below and what happens is thatall traffic in the bulk class stops after a couple of minutes. Also, should I include the ports for rtp in the filter statements with the ports 5061 and 4569? Note I have a fairly big pipe -- supposed to

Hi, In my LAN Iam trying to make following setup: - All the traffic generated by 10.0.2.1 should go to 10.0.2.11, If the destination of this traffic is internet than it should be placed on its interface eth1. Outgoing traffic on eth1 should be shaped.For this I am using fw filters and cbq. _______ 10.0.2.1 -------> 10.0.2.11(eth0 )----| A

Dear R-Experts, a student of mine tries to use the Windows-Rconsole with screen reading software (she is blind), and cannot access the command line (Menus are ok). The company which produces her screen reader tells her that this is due to the cursor used in Rconsole, which is static, not blinking. They maintain that if the cursor could be changed to a blinking one, she should be able to access

Hi All, I found 2 unusual behavior with u32 classifier in Kernel 2.4.12. I’ve u32 compiled as module. 1> u32 filter seems not working if there is already some fw filter used for some other class. In order to get u32 working I’ve to delete root class, which in terms delete all fw filters too, and then same command for u32 works. fw is also compiled as module. 2> If I add u32 filter to my

Hi all, I've spent several days tinkering with Wine and have uncovered what seems to be a mess: Menus in Gnome for Wine applications... I'm running Debian 4.0 (Etch) with a few backports, and Gnome 2.14.3. I've progressed from the version of Wine that's in the Etch repositories, 0.9.25-2.1, through the one in backports, 1.0-rc1-1, to the current 1.1.1 from the WineHQ

Hello, I have been working on tc class . But when the classid reaches 5 digit , it DOES NOT ACCEPT THAT ... see the example below :: tc class add dev eth0 parent 10:36 classid 10:13310 cbq bandwidth 10Mbit rate 32Kbit allot 1514 weight 3.2Kbit prio 5 maxburst 20 avpkt 1000 bounded See the bold digit !! this command doesn''t work , but if i use with 4 digit then it works : tc class