similar to: Wine and eBookMan Desktop

How do I get wine to connect to an USB port ? I have tried the following (in ~/.wine/dosdevices): ln -s /dev/ttyUSB0 USB: but there are a couple of problems. 1) SuSE 10.1 has no ttyUSBx devices; 2) I don't know if USB: is the correct name for the port -- Andrew "Oh, bother," said the Borg. "We've assimilated Pooh."

Is there any way to get .SYS device drivers working with wine ? I have just acquired a Franklin eBookMan and want to use it to read. But the Linux program (ebmsync and ebmsync.tk) will not work on my (SuSE 10.1) laptop. -- Andrew "Oh, bother," said the Borg. "We've assimilated Pooh."

I am far from expert on these matters. But have a couple questions: 1. Are you sure that /dev/ttyUSB0 exists and is the result of the Prolific USB->serial converter? For example, if you yank the Prolific and reboot, is /ttyUSB0 there still? It is possible that there is another /dev/ttyUSBx out there.I doubt this but wonder. 2. I have recently been fuddled due to permission problems of

Hi! I'm having problems with SeaClear II v1.0.0.196. After setting up the symlinks in ~/.wine/dosdevices pointing to my gps-device (GlobalSat BU-353 USB) everything works as expected, but for some reason Wine/SeaClear steals all available CPU-time. 100% all the time. This problem does not exist if I start SeaClear with the GPS disconnected, making me belive there is a problem with

Ubuntu creates /dev/ttyUSB0 for me when I plug in the usb-to-serial-adapter. I have a symbolic-link to /dev/ttyUSB0 from 'dosdevices/com1'. What is new in 10.04 Ubuntu is that I have to sudo chmod o+r and sudo chmod o+w on /dev/ttyUSB0 every time before I start the app which uses that serial line. ttyUSB0 goes away when I unplug the serial adapter from the USB port or shut down the

doctordruidphd wrote: > I am trying to use software to program a scanner radio (BCD396t and UASD software). The software installs and seems to run properly, reading and writing database files. But I cannot connect to the scanner, through a USB-to-serial cable. > OS: ubuntu-8.10, kubuntu-8.10, debian/lenny (tried them all) > > lsusb identifies the cable as follows: > Bus 002 Device

Hello! I've ran into this annoying issue when setting up a new server. I have an APC SmartUPS hooked up on a USB-serial converter on /dev/ttyUSB0. This works nicely, until: hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling... pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 usb 3-1: pl2303 converter now attached to ttyUSB1 apcsmart gets into an infinite loop of this:

Wine does great job for GUI on screen (PC Oscilloscope) But, can't USB connect to external hardware device that has FTDI 245AM chip in it. See device in /dev/ttyUSB0. See device in lsusb, also in lsmod. Did normal linking, ln -s /dev/ttyUSB0 /.wine/dosdevices/com3. No luck. See the link with: ls -al of dosdevices. Using COM3 because in Windows registry in Wine, it says COMPORT=3 Any help?

Anyone have an idea as to how to automatically detect the USB number and create a sym link in the dosdevices directory. The problem is that I have several USB devices not used at the same time, and when the USB to serial adapter is connected, a /dev/ttyUSB? is assigned. To use this assignment under WINE, I need to automatically detect /dev/ttyUSB? and then create a sym link in

hi! some time ago i have purchased card reader for scanning sim-card. it have usb inerface. in set was cd with soft (as usual only for windows) soft on cd: usb-driver installer sim max 5.16 & i try to run it on mandriva2008 kernel 2.6.22.9 first i try to install 'usb-driver installer.exe' then install sim max 5.16(it's 2 prog.: sim editor and sim scanner),but that's wrong way!

I am trying to access my GPS using wine 0.9.24 0n Suse 10.2 and Cxoffice 6.0 Beta 3a . Cxoffice 5.03 does not work at all with my Suse 10.2 installation. The Magellan road mate tools work well enough in both cxoffce beta and wine, however wine seems to handle it better when importing POI ( Points of Interest) files. Overall I think the wine included with Suse 10.2 is doing a better job -

I am trying to use software to program a scanner radio (BCD396t and UASD software). The software installs and seems to run properly, reading and writing database files. But I cannot connect to the scanner, through a USB-to-serial cable. OS: ubuntu-8.10, kubuntu-8.10, debian/lenny (tried them all) lsusb identifies the cable as follows: Bus 002 Device 002: ID 067b:2303 Prolific Technology, Inc.

I am using Ubuntu 8.10 with the wine 1.0.1 trying to install SRM Training System Software 6.40.08 (http://www.srm.de/usa/software.html), the exe I'm using can be freely downloaded here (http://www.srm.de/Software/SRM64008.exe). The program installed without any problem but did open a dialog about selecting a com port that I clicked past without taking note(oops). I'm able to run the

Howdy, I've been trying for a while now to get this running. Can anybody please tell me what the proper configuration is for this unit ??? This is what I've got/tried so far: # cat ups.conf # Start with # # # upsdrvctl -u nut -D start MEGATEC MODE=netserver user=nut # Ultra ULT33046 2000 VA 1200 W

Hi Users NUT, I want monitor a UPS of brand SMS (Sinus Double 8 KVA) using a raspberry-pi. In compatibility list, is listed to use the blazer_ser driver. I use a USB adapter to RS-232 conected in to the No-Breake. Follow the comands e confs. root at rasp:/home/pi# lsusb *Bus 001 Device 004: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port* Bus 001 Device 003: ID 0424:ec00 Standard

Hello, I have an application that sends data out to a serial port, then should receive the reply. After some hassles I got the application to enumerate the serials (in a dialog box where you select the port), and after creating the link in dosdevices (in lower case I should note, wine will not recognize COM1) it actually starts sending out data (verified using a terminal on the other end). But

Kernel parameters aside (console=ttyUSB0 console=tty0), I am trying to get a login console working on a USB-to-serial adapter. systemctl enable serial-getty at ttyUSB0.service systemctl start serial-getty at ttyUSB0.service This works without issue on Debian 8. However when running the same on CentOS 7, my logs are filled with: May 16 12:44:58 localhost.localdomain systemd[1]: Starting Serial

Need to allocate USB0 to COM1 for Wintex 5.4 alarm software. Ubuntu sees the alarm panel (on device manager) on the usb port, but the software does'nt connect. Wintex software setup gives the options of Com1 to Com16. I have already tried: cd ~/.wine/dosdevices ln -s /dev/ttyUSB0 ./com1 Still not working. Any ideas?

Dear all, I have not found anything with Google, so I hope it is okay to ask here. I'm trying to run a program called "Paxon" (see http://www.paxon.de) under Wine. This is an program with speaks via a serial console to a modem (in amateur radio use). The program itself runs fine, I set up the serial connection with arenber at ubuntu:~/.wine/dosdevices$ ls -lk total 0 lrwxrwxrwx 1

Hi all, Currently, the "megatec" driver only supports UPSes which have a serial (RS232) interface. However, I'm under the impression that most of the models that speak the megatec protocol, and have an USB interface, just have a standard serial-to-USB converter inside. This being the case, there should be a "/dev/ttyUSBx" device which the megatec driver could use just as