similar to: Basic questions

Edgar, As far as I see there is nothing wrong with the partition, if you change it from /(root) you should be able to mount it directly as long as the kernel supports ext3 filesystem and you use the correct -t option. Not even necessary to repair it. This is a guess, but what most probably happened is that ext3 is builtin as a module or the mount statement in the initrd in /linuxrc was not

Hi I am running a PC under Linux SuSE 7.2 with kernel 2.4.18, self compiled. I changed some days ago the partition of my second HD from ext2 to ext3 with the help of tune2fs -j /dev/hdb2 and everything was running OK. Today, I had a problem with a frozen display and I had to reboot the box cold. During the corresponding forced check I got the following messages: Quote --------- /dev/hdb2: reading

Thank you very much for the help with my problems after I changed ext2 in ext3. So far, everything is now running smootly. However, tune2fs -l /dev/hdb2 delivers among a long output one line Fls features : has_journal needs_recovery What does this mean and how can I perform such a recovery ? Thanks in advance Edgar -- ----------------------------------- Dr.-Ing. Edgar Alwers

Hello, I made a "wine" upgrade from 2003121 to 20040914. I then installed a program "EasyBridge" that worked perfect with the 2003121 version. The installation was without any problems, and at the end of the installation the program started automatically, also withouth problems. But when I later on recall the program with "wine EasyBridge.exe" I get the

Hello Thanks to Beatriz Botero I know such thing should work nice. But I try some combinations and always get result as on pictures: http://www.janek.gwozdzie.dhs.org/pliki/screenbad.png while it shoud be http://www.janek.gwozdzie.dhs.org/pliki/screengood.png I would prefer fake-windows but tried also with real ones. My system is slackware-current with kernel 2.6.9-rc1 but then I tried knoppix 3.6

Hello, all. I am a very experienced computer user/developer who is new to Linux and to Wine. I have decided to migrate off of Windows - can't stand Microsoft and have only been using their products due to sheer necessity. In order to migrate, I need to have Wine working just about completely. Because of that, and because of my background, I will probably volunteer to help in the not

Nobody knows something new about tcng? I really think that this kind of language help people, i order to do easier configurations i want to know how can i do in tcng a nested classes configuration with HTB? -- Juan Felipe Botero Ingeniería de sistemas Universidad de Antioquia _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl

Hi, i want to control in my network, the netmeeting transfer of traffic, how can i control the audio or video transfer whether this services use dynamics ports? thanks -- Juan Felipe Botero Ingeniero de sistemas Universidad de Antioquia _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

I have a question, can i use traffic control in a linux pc if the linux is enabled as a bridge? -- Juan Felipe Botero Ingeniería de sistemas Universidad de Antioquia _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

How can i put a port range in a tcng or tc configuration > > Does somebody know??? > > It´s important, cause i need to regulate the bandwidth from the TCP port > 1054 until TCP port 1200, how can i do that???????? > > _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Hello, I am using eth0 as my xen management interface. There will no VM connected to the interface. I read a lot of articule about adding a interface and create a new bridge. Some add a ip address to the new interface some don't. Do I really need a IP on all interfaces ? Tx

My college is kerberized, and so in many situations authentication is both faster and more secure using kerberos tickets. Sadly I have run into a problem. The Heimdal included in FreeBSD seems to be incompatible with my school's servers running MIT kerberos when authenticating over gssapi. For example ssh in verbose mode returns: debug2: we sent a gssapi-with-mic packet, wait for reply

hi everyone i have a mailserver working with postfix 2.5.1 vda and virtual user with mysql and dovecot, everything is working fine but i want to offer quota and i have a problem with that because the quota in roundcube appear but calculate is wrong i need to delete the maildirsize file to force to recalculate, what can i do??? in my dovecot i have imap{ quota imap_quota, in plugins section i have

Hola Javier, si, y es un factor de Y. Pero ya entendí lo que tenía mal, me falta convertir Nt a valores de geodata antes de hacer el plot, es decir: date<-as.geodata(Nt) plot.geodata(date) Con relación a la actualización de mi versión de R, no me he animado porque he tenido problemas con paquetes que no tienen las actualizaciones y no me corren bien. Gracias y saludos Beatriz 2013/8/6

Buenas tardes a todos: No sé si alguno de vosotros sabe si con R es posible buscar una palabra en una web (por ejemplo, buscar "Alicante" en www.lasprovincias.es) y que, cada vez que lo encuentre, vaya almacenado las urls en un data.frame gracias de antemano! -- Beatriz Martínez [[alternative HTML version deleted]]

Hola a todos, estoy trabajando con dos archivos csv. En uno de ellos extraigo dos variables (que son coordenadas), del segundo archivo extraigo otra variable que transformo. Con estas tres variables construyo un data.frame (las tres variables tienen la misma longitud). Hasta ahí todo bien, solo que cuando quiero usar este data.frame para hacer un plot.geodata me marca el siguiente error Error en

Hola, Beatriz: Buscando en ?order derivé en arrange, y al final es como resolví: arrange(my.df, col1, desc(col2)) Con order no conseguía el orden descendente, pues me daba error al intentar hacer order(-my.df$col1) Gracias. Eva ________________________________ De: Beatriz Martínez <mtnezb@gmail.com> CC: r-help-es <r-help-es@r-project.org> Enviado: Martes 16 de julio de 2013

Estimada Beatriz Entonces hay buenas noticias. Ese es un error muy común, es como que no aprendemos y siempre cometemos el mismo error, las veces que me paso a mi. Al respecto yo aprendí a realizar str(mis.datos) para ver ... Sobre la actualización, yo sufrí de un software que requería R pero en una versión “obsoleta”, entonces comencé a tener más de una versión de R instalada en mi computadora

Hi I have the following barchart to which I want to add error bars. library(lattice) barchart(Change~fTreat,groups=Process,change, auto.key=list(points=FALSE,rectangles=TRUE), panel=function(x, y,...){ panel.barchart(x,y,origin = 0,...); panel.abline(h=0,col="black",...); } ) I have tried

Beatriz, Prueba legend("topleft",0,substitute(chi)). En mi PC funciona! En cuanto a LATEX, tienes razón, excede el tema de este foro, con lo que me reservo (lamentablemente) mis sugerencias. Saludos, Jose -----Original Message----- From: r-help-es-bounces en r-project.org [mailto:r-help-es-bounces en r-project.org] On Behalf Of Beatriz Lacruz Sent: 20 November 2009 15:13 To: Jorge Ivan