similar to: eth enumeration order

HDT 0.3.5 is out ! As you noticed, we've been adding codenames ;) You can grab this release on our webiste http://hdt-project.org/raw-attachment/wiki/WikiStart/hdt_0_3_5.c32 http://hdt-project.org/raw-attachment/wiki/WikiStart/hdt-0.3.5.img http://hdt-project.org/raw-attachment/wiki/WikiStart/hdt-0.3.5.iso http://hdt-project.org/raw-attachment/wiki/WikiStart/hdt-0.3.5.img.gz A dedicated page

HDT 0.3.5 is out ! As you noticed, we've been adding codenames ;) You can grab this release on our webiste http://hdt-project.org/raw-attachment/wiki/WikiStart/hdt_0_3_5.c32 http://hdt-project.org/raw-attachment/wiki/WikiStart/hdt-0.3.5.img http://hdt-project.org/raw-attachment/wiki/WikiStart/hdt-0.3.5.iso http://hdt-project.org/raw-attachment/wiki/WikiStart/hdt-0.3.5.img.gz A dedicated page

The -pre3 release is out and tends to be the last one before the release. This pre version adds two new features we thought it would be interesting to have in 0.3.5: - Reboot If your system features the reboot.c32 module, the "reboot" command will restart your computer. The floppy/iso images we provides includes this module to enable this feature. - Automatic Commands When starting

Hi all, Having a 4 NIC server, I want to bridge eth2 and eth3, with a bridge named br0. Searching the web I only found about creating a file /etc/sysconfig/network-scripts/ifcfg-br0, but did not find where to explicitely list what ports will be bridged. Where is it configured? Thank you. -- RMA.

I have two servers with identical hardware ... TYAN i3210w system boards with dual intel gigabit interfaces, and a PCI intel gigabit nic. I'm running Centos 5.4, x86_64, 2.6.18-164.6.1.el5 Every other time I reboot, the nics initialize in a different order. anaconda had setup /etc/modprobe.conf with alias lines for the cards: alias eth0 e1000 alias eth1 e1000e alias eth2 e1000e However,

Does anybody have a working version of tcptrack running on Centos 6 x64? The rpmforge rpm installs and runs on the -t eth# command, but if you add a port to it, it bombs with a pcap compile error. It runs fine for me on Centos 5 x64, but seems to have what looks like an old bug reintroduced in 6. -- John Hinton 877-777-1407 ext 502 http://www.ew3d.com Comprehensive Online Solutions

Hi all, Our intranet's WAN interface just stopped working yesterday, and I can't figure it out. The machine has a Gigabyte motherboard, with on-board RTL-8110SC/8169SC Gigabit Ethernet and D-Link PCI NIC for the LAN side. I can get into the LAN side without an issue, but can't see the WAN side at all. [root at intranet ~]# ifconfig eth0 up eth0: unknown interface: No such device

On 10/13/2016 5:57 PM, Steven Tardy wrote: >> On Oct 12, 2016, at 12:26 AM, John R Pierce <pierce at hogranch.com> wrote: >> >> the switch ports kept going offline on us. > Not finding anything exactly like this... Closest I could find is CSCuu81949 > > Open a Cisco TAC case and upload a Nexus 9000 tech support (`tac-pac`) to investigate further. > > Is

On 10/11/2016 9:03 PM, Ashish Yadav wrote: > Please test that if both the server are communicating with each other at > 1Gbps or not via "iperf" tool. > > If above gives result of 1Gbps then it will eliminate the NICs problem then > you know that it is a problem with cisco switch only. after they forced the cisco ports to gigE, I was seeing 200-400Mbps in iPerf, which

I am trying to add 127.0.0.1 to my resolv.conf. I added it through the system-config-network but if I reboot, its gone. I do not have the caching nameserver package installed. My ISP's nameservers are there. It must have something to do with DHCP. Also, in the network config GUI, should I select the IPv6 option for either or both network cards? TIA

This should be easy to answer (I hope).? We routinely kickstart boxes to use for managing our customers RADIUS/DHCP configurations (along with other things).? We've had a C7 kickstart in place since I built one in May and are finally starting to roll it out for new installations.? But, I'm curious as to what ksdevice= actually does. With the C6 we routinely used ksdevice=eth0 since we

i'm looking for a way to automaticaly update my centos 3.4 system so that it will get security updates every 24 hours and automaticaly install them.

So a 70-persistent-net.rules like # onboard port 1 -> eth0 ACTION=="add", SUBSYSTEM=="net", BUS=="pci", ID=="0000:00:19.0", NAME="eth0" # PCIe card -> eth2 ACTION=="add", SUBSYSTEM=="net", BUS=="pci", ID=="0000:03:00.0", NAME="eth2" # onboard port 2 -> eth1 ACTION=="add",

I have been searching for information about implementing Logon Hours with a Samba 2.2.5 PDC (or for that matter any version of SAMBA) but haven't yet noticed any postings or correspondence. I have set up a a Samba PDC and have mapped shares, authenticated users, blah blah blah, .... everything seems to work fine. I checked with 'rpcclient' to see what sort of information is

Hi all I started playing with tcng to generate my tc rules, but I have some difficulty implementing my rules... The script below generates an error: # Device eth0 tc qdisc add dev eth0 ingress beginner.tc:2: don''t know how to build meter for this The script is below, I changed the real IP numbers for XXs and YYs, since it doesn''t really matter what they are. eth0 is the

another identical machine will have the same bus ids. that's why this works. Kahlil (Kal) Hodgson GPG: C9A02289 Head of Technology (m) +61 (0) 4 2573 0382 DealMax Pty Ltd GitHub: @tartansandal Suite 1416 401 Docklands Drive Docklands VIC 3008 Australia "All parts should go together without forcing. You must

Hi, I have a LAN server running CentOS 5.11 with two NICs eth0 and eth1. I'd like to swap the interface names, but I don't know how to go about that under CentOS. Here's what I would do on a Slackware server (I have one next to me in my office). Open /etc/udev/rules.d/70-persistent-net.rules and edit it: # PCI device 0x8086:/sys/devices/pci0000:00/0000:00:04.0/0000:03:00.0 (e1000e)

Hi there, sorry for rather long mail. Two verbose dmesgs and `pciconf -vl` outputs attached. trying to set up new machine based on ASUS P4BGL-MX motherboard, I'd encountered hangs after detecting pcib1 (ICH2). MB has rl 8100 ethernet chip onboard. This is for 4.8-R; however, machine hangs in very similar way also with 4.4-R and 5.1-R. Matrix of hangs: Onboard Ether External Ether Result

Hi, I'm currently experimenting with CentOS 7 in order to get a grasp of everything that's new. After having read the FAQ entry on network interface names, I decided to revert to the tradictional interface naming scheme by adding the relevant kernel options to the bootloader. This went well, I have now two interfaces names 'eth0' and 'eth1' as expected. In my office

Hi all, I'm facing a serious problem with the e100e kernel module for Intel 82574L gigabit nics on Centos 6. The device eth0 suddenly stops working i.e. no more networking. When I do ifconfig from console I get eth0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:EA inet6 addr: fe80::225:90ff:fe50:8fea/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1