similar to: Run commands automatically when bringing up/down network interfaces?

We're looking for tools to be used in monitoring the PERC H800 arrays on a set of database servers running CentOS 5.5. We've installed most of the OMSA (Dell monitoring) suite. Our current alerting is happening through SNMP, though it's a bit hit or miss (we apparently missed a couple of earlier predictive failure alerts on one drive). OMSA conflicts with mega-cli, though we may

I'm looking for suggestions as to a good general method of remote-logging services such as nginx or anything else which doesn't support syslog natively. I'm aware that there's an nginx patch, and we're evaluating this. It may be the way we fly. However there are other tools which may not have a patch for which remote logging would be useful. If there's a general soution

Greetings, On 1/22/11, Edward Morbius <dredmorbius at gmail.com> wrote: > CentOS is not a Dell-supported configuration, and we've had little helpful > advice from Dell. There's been some amount of FUD in that Dell don't seem > to know what Dell's own software installation (the md3 > > Dell doesn't seem to have much OS experience generally. > +1 It is

We've been wrestling with this for ... rather longer than I'd care to admit. Host / initiator systems are a number of real and virtualized CentOS 5.5 boxes. Storage arrays / targets are Dell MD3220i storage arrays. CentOS is not a Dell-supported configuration, and we've had little helpful advice from Dell. There's been some amount of FUD in that Dell don't seem to know what

I'm used to Debian-based distros which have a tempfile(1) utility for safely and sanely creating temporary files. There isn't a comperable utility for RHEL/CentOS systems. I've been exercising Google-fu looking for a good robust tempfile generation idiom, but haven't turned one up yet. Hence this appeal to the lazyweb. -- Dr. Ed Morbius, Chief Scientist / | Robot

We utilize LVM snapshots for some periodic maintenance. They're manually created and, usually, manually destroyed. But not always. So there's now a nightly script monitoring for open snapshots. Which raises the question of when a given snapshot was created. Absent good practices of, say, using sudo to create snapshots (leaving a /var/log/secure message), is there any reasonably

This works for me on Centos 5.6. It may assist newcomers to the Linux world of Centos. whois 51.51.51.51 produces a normal and conventional display of data. However since ARIN, the North American registrar of IP addresses, "modernised" its WHOIS processing, a query to whois 64.64.64.64 will produce a one line summary of possible matches, which always includes ARIN, but omits the

Hello, I'm following instructions in http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.LVS-DR.html#route_on_non_ip_interface to allow my xen guest real hosts to serve virtual IP's behind LVS without having to allocate real public IP addresses for each such xen guest. I have eth1 connected via a "back-end" switch to the eth1/xenbr1 of the xen host and the other physical

Hello, I have some domU accounts running CentOS 4.4 and whenever I try to bring up the network interface it fails with the following errors: [root@test5.liquidweb.com] ~ # ifup eth0 Usage: grep [OPTION]... PATTERN [FILE]... Try `grep --help'' for more information. Usage: grep [OPTION]... PATTERN [FILE]... Try `grep --help'' for more information. Usage: arping [-fqbDUAV] [-c

Hi -- I'm running a server which is usually stable, but every once in a while it hangs. The server is used as a file store using NFS and to run VMware machines. I don't see anything in /var/log/messages or elsewhere to indicate any problem or offer any clue why the system was hung. Any suggestions where I might look for a clue? -- Michael Eager eager at eagercon.com 1960 Park Blvd.,

I need to apply three resources one immediatelly after another. It''s a ifdown/ifup commands, and command to generate /etc/network/interfaces file. I need to do ifdown, then rebuild interfaces, then ifup. I try to add simple relationship, but in this case some File resources are trying to be applied between ifdown and ifup. So they can''t connect to Puppet master to verify

I''ve had a shorewall firewall protecting my home network for almost 3 years now which is currently on a RedHat 7.3 box and I''m running version 1.4.7 I''m replacing this box with a newer one and have set it up with Gentoo linux and the 2.6.9-r9 kernel and installed Gentoo''s distro of shorewall which is version 2.0.7. I have also compiled the needed netfilter

Hello all I am setting up a Centos 6 machine with one network card & one onboard network port. Both are recognized & work. Onboard Network port is unused yet, but is required for dedicated access to LTSP LAN, which would allow older PIII machines to boot from this system. I have installed LTSP but again Networking seems to be the problem area, as the clients won't boot from this

Hello, First of all, I already contacted Martin Devera, the developer of HTB, and he told me to search for help on this mailinglist, thus I am describing my problems here now... I am kind of seriously annoyed by QoS as I have been trying for over 3 years to get it working properly - first I did not understand how it works, then it seemed not to work, then it was working perfectly for half a

I want to change the contents of my /etc/sysconfig/static-routes-ipv6 and NOT restart the network. Is there a way to do this??? I know about ifup and ifdown for interfaces, but what about routing (and IP6 at that).

Hi Guys, I want to create multiple virtual interfaces on a system running linux 2.6. The main requirment being, to assign unique MAC address fo each of the virtual interfaces. I need to know, if this is possible and will really appriciate if someone can provide me pointer in this direction. Thanks a lot. R. Singh _______________________________________________ LARTC mailing list

Hi All, Could anybody tell me the creating of pv domain on nas. I mean to say that root file sytem should be at nas location. Useful links will be most welcome. Thanks, Trilok _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hello, since updating to Centos 7.4 the ifup-post script in /etc/sysconfig/network-scripts does not behave as it did before the update. I use it to configure additional routes via? /sbin/ifup-local with the parameter of the interface being upped, but it seems to pass only 'lo' as interface name. Before it passed correctly 'eth0:0' of the virtual interface. Added a line in

Requirement is a very strong word , but you should consider using it and here is a short demo why: - By default, RHEL uses NetworkManager to configure and manage network connections, and the /usr/sbin/ifup and /usr/sbin/ifdown scripts use NetworkManager to process ifcfg files in the /etc/sysconfig/network-scripts/ directory. [root at system ~]# ls -l /usr/sbin/ifup lrwxrwxrwx. 1 root root 22 21

Anyone know off the top of their head the "right" way to hard set a link automatically to 100Mbps Full Duplex, etc using the ifup or ifcfg files? Don't see options in the scripts that might cover this, but maybe there's a more elegant way to do it than to do something in rc.local or hack up the ifup files myself... Ray