Displaying 20 results from an estimated 2000 matches similar to: "XORG and LCD Projector"
2005 Jun 17
1
Re: screen fonts -- LCD and Analog Connections ...
Ryan wrote:
> I did, 1024x768.
> Sorry, analog
Matthew Miller wrote:
> Maybe the problem is just in that adjustment, then.
Yes. You need to have your signaling _exact_ when dealing with LCDs.
Some are very good at taking the timings of VESA standards. But some
support some eccentric Windows timings that are _not_ the exact same
as VESA. Or maybe you have configured your monitor for
2006 Jun 20
2
xorg display problems
Hi all,
Up until today everything has been fine with CentOS on my Toshiba laptop.
I booted into CentOS 4.3 today and Kudzu detected my video card for some
reason. I let it configure it (wish I hadn't now).
I can still get in. X and Gnome work. But the video resolution is
800x640. The LCD is capable of 1024x768. I cannot change it using
Gnome tools or direct editing of
2008 Feb 18
6
system-config-display wrongly sets up Viewsonic VG730m monitor
I originally set up this monitor with an analogue lead. Everything seemed
fine, so I didn't check xorg.conf at all. Then I bought a digital lead, and
since then the monitor blinks. Running system-config-display identifies it
as a 1280 x 1084 CRT monitor. It is an LCD monitor.
That model is not on the drop-down list, so assuming that a specific driver
wasn't available for it, I
2008 Oct 02
6
Video driver questions
My OQO has a VIA chipset. From the hwconf:
class: VIDEO
bus: PCI
detached: 0
desc: "VIA Technologies, Inc. CX700M2 UniChrome PRO II Graphics"
vendorId: 1106
deviceId: 3157
subVendorId: 1106
subDeviceId: 3157
pciType: 1
pcidom: 0
pcibus: 1
pcidev: 0
pcifn: 0
When I install Centos, I default to the vesa driver, and it operates at
the monitor's native 800x480. Of course I
2008 Jul 30
5
Widescreen monitor won't configure to a wide screen
I just put a 1680x1050 LCD monitor on my home system, and I went into
system-config-display to configure it as such, and it just won't take.
I had to tweak some of the settings by hand, but when I log out, I get
the wide screen for both the Nvidia driver splash screen and the login
screen.
But, when I log in, It jumps back to 1280x1024 and refuses to run in
wide screen mode.
Here's the
2012 Jan 10
1
Centos 5.7, I10 video, 1920x1080 monitor
I have a Centos 5.7 machine with Intel I10 video (built-in, I guess -- this is
one of those all-in-one mini terminal things) that I'm trying to put a new
1920x1080 monitor onto, without conspicuous success. Prior to this it's been
using a smaller monitor with no issues.
Try as I might I can't get the new monitor to run at its 1920x1080 resolution.
I just realized that I forgot to
2019 Sep 23
2
Video projector vs. onboard video card
Hi,
I have a CentOS 7 desktop client installed on an old Dell Optiplex
computer with an Intel video card integrated into the motherboard. The
card has a single VGA connector, and the 19" monitor is connected to it.
I wonder how I could connect a video projector to this computer while
keeping the monitor, in a mirroring configuration, e. g. output is the
same on the video projector and the
2006 Sep 29
1
4.4 on Dell D620: widescreenresolution?
Hi,
Did anyone manage to get 4.4 working on a Dell D620 laptop? The thing
has a 1440x900 LCD screen, but I don't get X the work with that
resolution. (lspci: Intel Corporation Mobile 945GM/GMS/940GML Express
Integrated Graphics Controller (rev 03))
Google suggested to use '915resolution', which I installed
(915resolution-0.5.2-1.el4.rf), but that doesn't help.
Regards,
--
2009 Mar 03
2
DVD-"this projector file is corrupt! Unable to continue"
When I want watch a DVD (technical sports) I obtain this message :
"this projector file is corrupt! Unable to continue" and
"this projector is stopping" and finally
"this application cannot run".
Before install Ubuntu 8.01 (Intrepid ibex) I worked with windows and I could watch my DVD (it is " Aikido3D from www.aikido3d.com ").
Is it possible to solve
2006 Jan 14
2
"nv" driver lock up where new version
I have had my "nv" driver lock up a number of times.
I downloaded the "nvidia" drivers and they did not work at 1920x1080
resolution.
I am looking for an updated driver for just "nv".
I found some once for a different driver that you just update commonXXX and
yourdriverXXX not the whole X recompile.
Where can I find those drivers?
THanks,
Jerry
--------------
2007 Dec 31
2
1680x1050 Monitor
Hi,
I just got a new Samsung 226bw 22" wide monitor to replace my
previous one. I also have a nvidia 8600gts video card.
I can set interactively [through the nvidia-settings utility] the
1680 by 1050 resolution. I have saved the settings in the
xorg.conf, but I can't keep it after a restart of X or a reboot.
When I restart X, the login is at: 1680 by 1050, then it switches
to 1280 by
2003 May 21
2
Size of x11 device
I've fairly recently changed my Linux desktop, and now use a XFree86
server. The default X11() window is rather small: it is supposed to be
7" x 7". However,
1) It is actually just over 5" x 5" and
2) 7" x 7" would be rather small on a 21" screen.
The reason for 1) is that DisplayWidthMM give 542mm, when it is really
close to 400mm (and the correct
2009 Jan 30
5
/etc/X11/xorg.conf question
If I use "system-config-display" or "system-config-display --reconfig"
although I get a message that I need to log out of GNOME, to have the
new file written, for new Display Resolution, logging out or
restarting the box does not result in the new settings for the Display
taking hold. Sometimes, the number of colors is updated, but *never*
the Resolution. Below is my xorg.conf
2007 May 03
2
More CentOS5 nVidia fun
In the vein of the "Can't get resolution higher than 1280x1024" and
"Another CentOS 5 oddity..." threads, I just installed CentOS5 w/Xen
kernel on a Sony VAIO desktop with an nVidia NV5M64 (RIVA TNT2 64 Pro)
card, using an old Samsung SyncMaster 700NF monitor.
system-config-display chose the highest possible resolution for the
monitor and Xorg did its best to drive it, but
2008 Feb 02
4
Monitor power save question
I decided to try the x86_64 version of CentOS 5 on my new desktop since
it has an Athlon 64 X2 CPU. The one really perplexing oddity is that
the monitor no longer goes to power save mode (standby) if the system is
idle long enough (e.g., overnight).
The "power management" option is set to put the display to sleep after
thirty minutes. The display gets blanked but it never goes to
2011 Aug 06
1
Cursor disappear when entering WINE application
dear guys,
I'm installing CentOS 5.5 on my laptop. I also install WINE to run Microsoft
Office and running well.
The problem is, my cursor is always dissapear when I open MS Office
application. When I point my cursor
on window of the MS Office (example : MS Word), my cursor has gone!
Have you ever had same experience like me? what's the solution?
thanks,
-------------- next part
2008 Mar 12
15
About WizardPen driver
First of all, I am sorry for my bad english.
I have a UC-LoGIC WP8060 tablet.I using wizardpen taplet driver. I using PS 7.0 with wine-0.9.33.
My Pen worked perfectly with wine-0.9.33, but PS7.0 has some bugs.
I update my wine "wine-0.9.56". PS 7.0 working perfectly but my pen has not got pressure sensitive.
I turn back wine-0.9.33. I have too much problems PS 7.0. I want to use new
2012 Sep 22
1
Problems with widescreen (16:9) under CentOS 5 w/ xorg-x11-drv-i810-1.6.5-9.40.el5
I am the tech guy for a local library. We have a network containing
several diskless workstations. The hardware are these P4 boxes:
http://www.geeks.com/details.asp?invtid=SAMBA845V-24-4-R&cat=SYS
(We have inserted additional memory, bringing most of the machines up to
1.25Gig of memory, and two up to 2Gig of memory.)
These little machines have integrated Intel video chips on their
2007 Jun 28
3
Install XGL under CentOS 5 with ATI X600 and dual-head configuration
Hi again.
I've got a laptop with an ATI X600 inside, perfectly working xorg with
dual head configuration, 2 desktops (without xinerama).
I've got 2 xorg.conf files, one for propietary ATI (fglrx) driver, and
other to use the open source driver. The difference is very notorious.
The problem I have is that I read (Saint Google) that to work with
compiz/beryl and dual-head configuration, I
2019 Sep 23
0
Video projector vs. onboard video card
On 23/09/2019 13:10, Nicolas Kovacs wrote:
> Hi,
>
> I have a CentOS 7 desktop client installed on an old Dell Optiplex
> computer with an Intel video card integrated into the motherboard. The
> card has a single VGA connector, and the 19" monitor is connected to it.
>
> I wonder how I could connect a video projector to this computer while
> keeping the monitor, in a